Windows 7 Professional "Sleep Mode" is not available

Similar Questions

• Windows 7 professional XP Mode - does not recognize external USB drives or internal DVD drive

  I recently bought a new Toshiba laptop and ordered computer configured with Windows 7 Professional that I can use the XP mode for some older programs.  Virtual Mode and XP mode work well, but the computer will not recognize the USB external storage drives or internal DVD player.  This prevent me to save and transfer any file I'm working on in XP mode.  Anyone know what I have to do to make the computer recognize USB drives and DVD drive internal when I'm running in XP mode?  Thank you!!

  Hello David,.

  Thanks for the quick response.

  Yes, it's a Microsoft Product, but there specific departments assigned to the people where they have more expertise, this is the reason why we have asked you to post your query in the TechNet where this issue is very discussed.

  Hope this information helps.

• Windows Media player miniplayer mode is not available.

  Original title: I can't find Option to get mini - WMP in Vista no. Disc No. Admin

  I can't find Option to get mini - WMP on Vista no disc/no Admin

  I have Vista Home Premium SP2 but no disk and I'm not Admin

  but I used TO be able to have a Miniplayer for her, but I just can't anymore and finally tried asking (no one seems to get answers but well maybe I'll get lucky! I AM no A good bit on how to 'USE' a Computor but I Like TO find an easier less risky way to challenge A seemingly EASY difficulty Thate should likely have its own update because it clearly so widespread a problem. I would like try anything

  Hello

  -Were there any changes made to the computer before the show?

  -          What do you mean by "but I used TO be able to have A Miniplayer"?

  -Media are which player you referring?

  If you want to change Windows Media Player Mini Player mode, then follow the suggestions listed below.

  Right-click on an open in the taskbar area Windows (such as the system clock), point to toolbarsand then click Windows Media Player.

  This activates the function and should only be run once. A check mark appears next to Windows Media Player to indicate that it is turned on. To switch to mini player in the future, simply click on the button cut in the drive.

  For reference:

  Switch between display modes in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/switch-between-display-modes-in-Windows-Media-Player

  Answer us with more information on this subject.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• OfficeJet Pro 8620: Sleep mode does not

  "Sleep" mode does not work on my new settlement 8620. I tried to change the duration of sleep from 5 min. to 10 and 15, but he was not asleep yet. I tried to close and restart the unit, but that did not help. 2 times the unit did go to sleep, but then he woke up after a short time.  Any suggestions?

  Hello

  Fitrst ensure that the printer has the latest firmware:

  http://support.HP.com/us-en/document/c04083718

  More don't forget to connect its completely directly to a wall outlet and not by some power strips, surge protectors, etc.

  If the same results persists, try temporary disconnect a cable from the back of the printer in order to isolate any possible cause (e.g. fax, USB cable, etc.), remove one cable at a time and to check for the difference.

  I suggest starting with telephone wires, telephone line condition as example may prevent the printer from sleep remaining.

  Please let me know the results,

  Shlomi

• 4 expressions gives the message that the passive FTP mode is not available

  I published Expressions4 about five times and now I get a box readings (the passive FTP mode is not available) and it will refresh any more.  I need help to fix this program. I'm not a person on the site code.

  Maybe you should try the Expressions support site.

  http://www.Microsoft.com/expression/products/Web_FAQ.aspx#3

• In Windows 7, multiple drive letters are not available to map network drives.

  Missing drive letters in Windows 7

  In Windows 7, multiple drive letters are not available to map network drives.  e: by j: are missing.  How can I fix?

  Drive letters are assigned to other devices, probably the USB card readers.

  You can change the assignment of drive letters in disk management if you want.

• My system is equipped with windows 7 Professional, that I am not able to install my "Hp LaserJet p1008" printor thereon.

  Dear,

  My system is equipped with windows 7 Professional, that I am not able to install my "Hp LaserJet p1008" printor thereon. Maybe the compitablity questions.

  Please notify. If I run the driver, but it fails.

  Concerning

  Khurshid

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  You must go to the HP site & get a Windows7 compatible driver, when it exists.

  You can also try to make older in this version of Windows programs and see what the Windows 7 Compatibility Center says of this printer.

  Otherwise, you can try the search on the HP LaserJet p1008 in this forum & internet generally for all those who have found a workaround using the printer, despite the absence of a driver that is compatible with Win7.

• "sleep" mode does not work in my window 7?

  my "standby" does not work even if I click on sleep, it does not react and the word of sleep is different form the other Word

  Hello

  1. what was the last time computer worked well?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do you use screensavers?

  You can follow the suggestions mentioned below and check with the question.

  Windows 7 is not going to sleep:

  http://support.Microsoft.com/kb/976877

  I hope this helps!

• Windows 7 Professional x 64 will not install in AHCI Mode

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-ultimate-x64-will-not-install-in-AHCI/282886d4-a614-405f-aa33-f484e7ce5e6d?page=2

  I'm having a similar problem and wonder what the final steps / solution?

  When I tried this with Windows 7 Pro 64 bit does not recognize the H.D.

  I also read KB and think it doesn't look good for the installation of the driver.

  If must go to AHCI at all and what I said is that AHCI mode is for the correct entry for drivers on the disc. and if it raises a question?, if it is impossible to install windows initially in AHCI how is that windows has been installed correctly at all?

  My system is going to be the motherboard Asus M5A99X, Six cores AMD 1090 t., 12 GB ram, Windows 7 Pro 64 bit.

  I have also had similar problems with my Asus M4A88TD-V EVO/Usb 3.0 is the original built the motherboard and is the motherboard present until I have find this and am hesitate to disassembly and reconstruction with the new M5A99X.

  Here's what I posted on my Asus Forum;

  http://VIP.ASUS.com/Forum/view.aspx?ID=20120422012743839&SLanguage=en-us&board_id=1&model=M5A99X%20EVO

  I just bought this new M5A99X now (previous motherboard has been renovated and has no sound, no disk support, from Newegg.com) from Microcenter and I hesitate to start tearing down and rebuilding of my custom version until I have find this AHCI configuration.
  On my previous motherboard, I tried this and it do not see the HARD drive.

  It's confusing, because if one thing works another doesn't 0_o

  I read the http://support.microsoft.com/kb/922976 on AHCI and;

  What is appropriate for the correct configuration? SATA and AHCI first, then if the AHCI drivers are not loaded, then again on AHCI (immediately) and then keep in AHCI or sata and SATA when?

  When I read it; http://support.Microsoft.com/kb/922976 it seems to suggest that I have to install mode SATA, then REGEDIT. problem is that if my computer falls down before that I still have the chance to do it then what?

  I do not currently make a Raid Config just a normal installation on a Seagate beracutta 2 TB 6 GB/s hard drive.

  I also posted on Microsoft Technet http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2

  I have rebuilt since the system and it was easier than I thought that the new motherboard was set as the default AHCI. When I installed windows there is a driver load option and clicking while I was able to load the AHCI driver from the DVD player. the old motherboard there are a lot of other steps and it's more than the new motherboard diffacult. It was so much better in my other post on the forum, and thanks to these people http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2 response

  all other replies to this post were of no use to me and so I hope that I have helped those who were also trying to understand this. THA post above that says he suggested to install windows 8 and this post has nothing to do with windows 8. forum message header said WINDOWS 7! where the reason why I make my answerts of the technet forums instead! Trying to sell a BONE? Im just trying to get my work and try to sell me a new OS is not going to happen with these existing answers.

  I don't have to wonder why, in one of the previous answer, so-called, was told not to post my other post on the forum. but there again question me answers in this forum.

  There are people who are eager to build computers and try to understand this thing of AHCI driver.

  on the old motherboard, it was not so easy to do. I wonder why Microsoft has a processor intel AHCI driver built in? and not as an AMD one to be recognized by the operating system.

• WINDOWS 8 enter "the sleep mode" and not to wake up, necessary reset.

  PC:Samsung np530ub
  OS: Windows 8 pro x 64

  What happens, laptop in sleep mode: off of the screen, drive hard light stop, Dungeon of light wireless on, seeing power keep on... Press the power button to wake the computer nothing happens. have to hold the power button to reset the machine.

  It happened once in all, but now is every time. Cleaning of the NET solution... nothing has worked

  what I've done so far:

  updated drivers

  windows update

  bios update

  turn off wireless and bluetooth
  activate usb bios s3
  the powermagement on devices tab
  power management - see if any device in the way of fashion is "Eve". powercfg-applications
  powercfg - requestsoverride driver \FileSystem\srvnet system
  check the multimedia device sharing (disabled)
  hybrid mode (off)
  disable the fast startup (disabled)
  Powercfg - devicequery wake_armed (return NONE)
  for now I have disabled the quick start and "sleep" mode...

  Hi Leo,

  We appreciate your efforts.

  Have you updated the drivers from the chipset on the computer? If this isn't the case, I suggest you to update and check if it helps.

  Step 1

  Run the electrical troubleshooting and check if it helps.

  a. press Windows + W on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click Power, will new popup window.

  e. follow the instructions on the screen.

  Step 2

  Delete the current power management and create again.

  Check out the following link to change the plan of power to your needs.

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  See the section: how to create and delete a power plan

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows 7 goes into sleep mode when not in service

  Computer completely locked up all night, had to make a stop/reboot power strip, now everything works fine, but it won't in standby mode when not in service, regardless of the settings I can give it in the control panel

  I want to emphasize this happened after I downloaded rage radio, although I've uninstalled it quickly after realizing I was didn't want or need and I loved all the extra stuff that goes with it.   Have no idea if they are related or not...

  I checked for updates of driver in the Device Manager specially for the new mouse I had installed.  He said that the device was working properly.

  I did the boot as described in the previous post, with no result.

  Not having anything better to do, I decided to try reinstalling the original mouse (disconnect the new mouse from the USB port and plug the original mouse) starting the computer working properly.

  There is clearly some kind of conflict with the new mouse, but I have no idea what it could be.

  Anyway, thanks a lot for your help.  I'm happy to have solved the problem!

• Windows Vista's sleep mode after 20 minutes while playing PC games even though my power settings are set to NEVER.

  Windows sleeps only during the performance of PC games (not all PC games, sometimes with Call of Duty 2 but not with FIFA 07).

  According to my settings sleep mode & disable the display are set to never for both blocked in battery mode. Any help would be appreciated

  Thank you

  Hello

  1. what happens when you restart the computer from sleep? It back to windows, such as the release of sleep or does go through the normal boot process?

  2 have you done any recent software or the hardware changes on your computer?

  3. don't you face the problem only by playing games?

  Method 1:

  I suggest you to run a full scan of your computer and check.

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Note: If infections are detected during the scan, it is possible that infected files would be deleted.

  Method 2:

  I also suggest you to start your computer in a clean boot state, and check if all third-party software could be the cause. Clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

  Method 3:

  I also suggest that you perform a clean boot material to check if the problem is caused by any device.

  Follow these steps to perform a clean boot material:

  a. disconnect all external devices.

  b. start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  c. click 'Start', type 'DEVMGMT.» SMC"in the search text box and press ENTER."

  d. expand "graphics cards".

  e. right click on your graphics card, select "Properties"

  f. click the "driver" tab, click on disable (disable the selected device). Click OK

  g. use the same method to disable other devices such as: map of the sound card, Modem, network, CD - R drive. Note Some devices not available must be disabled.

  h. restart the computer.

  After you turn off the devices, start in normal mode and try to activate the devices one by one and check which device is causing the problem.

• "Sleep" mode does not appear

  I installed windows professional 2 days back, but the sleep mode option does not appear in the options... What should I do? Help, please

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  J W Stuart: http://www.pagestart.com

• Protection of password after entering sleep mode does not

  I recently added another user to my windows laptop 8 and after mode password protection 'sleep', he stopped. I went in the power options, and this option is grayed out. All solutions?

  If the option is greyed out, click the link above that says that "change settings that are not available.  He could ask administrator permission.