Windows 7 Professional with white screen and the mouse cursor

Similar Questions

• Windows Vista starts with empty office and the mouse cursor, then restarts

  I have trouble getting Vista to start on an Acer laptop.  The laptop is an Acer Aspire 6920 G with Windows Vista Home Premium 32 - bit on it.

  The PC will start in an empty office with stop mouse cursor on this screen for about a 1 min and then it restarts and you go through the same process again.  I tried the safe mode and last good configuration to know but get the same results.  I have also tried to run the Startup Repair tool and get the same screen.  I can launch Startup Repair to boot from a DVD of Vista Home Premium 32-bit and I can run but it makes no different.  When you restart, you get the same problem.

  Does anyone have an idea?

  No it isn't the trunk upwards with the black screen and the mouse.

  Hi KevinBricknall,

  1. have you made a recent software or hardware changes to the system?

  Since you are unable to run start up repair boot from the Vista disc, you can try to perform a system restore start from the disc and see if it helps.

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• the home of Windows 7 Desktop with touch screen and the problem is "not authentic."

  I have a windows 7, but lately its been said that is not true and that I have a counterfeit. A person or an HP agent will be able to help me or guide me in this process of solving this problem?

  According to Microsoft, Windows activation is valid during the initial Setup.  If you change the device, it can falter, because it will do a periodic test.

  (1) if I have activated Windows, why is Windows on my computer not authentic?

  Genuine Windows is a recurring process that checks your product key to ensure that it is used with the material, he has been associated during activation. If the product key appears as not authentic or not valid, it is likely that the product key is used on another computer or is a counterfeit.

  (2) I need to activate Windows after making a hardware change?

  Perhaps. When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Install Firefox 31 point 8.1 of Windows just gives a blank screen and the error "not responding".

  31 Firefox has been installed and works perfectly on my Asus laptop under win 8.1, until this morning. I opened the browser and just got a white screen. The Task Manager showed Firefox as "not responding". I uninstalled and reinstalled Firefox twice, as an administrator, try 'reset Firefox' the second time. No change. I downloaded Firefox 29 and could install. It opens but freezes and unresponsive, as soon as I get a web address. I'm stumped, as Firefox worked perfectly until this morning. Someone had the same problem and, better yet, found a solution?

  It could be the work of one of your modules, or even add / bad-ware.
  Look through your list of modules and make sure you know what each of them is
  and what it does. In addition, to check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux:

  • Ubuntu unity {web link}
    
  • Xfce: Category for the Applications Menu items
  • options depends on the package and the desktop environment Manager

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• Hard disk with white screen and blinking cursor failure

  When I turn on my HP G60-519WM laptop I now only get a blank screen and a blinking cursor.  When I run diagnostics from the BIOS, he reports that the hard drive breaks down the main hard drive as self-test.  The PC is about 6 months after the warranty period.  Two questions:

  1. If I replace the hard drive me how can I get all the HP utilities on the new hard drive and Windows 7?
  2. What are my options for HP perform an out of warranty repair?

  Hi Dan,.

  See first of all, if you create a set of recovery on your workbook disks - there is a guide for this here.

  If you create these disks, I think they would work to reinstall the operating system on your laptop, because they have the same reference no..

  Kind regards

  DP - K

• On-screen text is faded-unintelligible, audio playback is corrupt and the mouse cursor freezes erratically?

  Hello

  Suspecting a severe virus attack, I reinstalled my O.S. Win7x32.  I see now several faults, I.e. the mouse cursor freezes, corrupted - the text to audio playback screen is faded and illegible in places?

  Any help would be greatly appreciated.

  Thank you in advance,

  John B.

  Sorry, but, all that said... FAILURE OF THE MOTHERBOARD!

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• How to bypass the login screen of the mode standby in Windows 7 Professional with active screen saver

  Here is the solution/answer:

  1. go in Control Panel

  2. click on "personalization."

  3. on the lower right corner to say 'screen saver '. Click on screen saver.

  4. in the scree of Eve window between the 'Screensaver' name and the power management box is empty 'Wait' then 'minutes '.

  Right of "minutes" is a block that says "on resume, display the login page.»

  5. If the "On Resume, the logon screen" box is check uncheck.

  6. click 'OK' your done

  This works if you have an active screen saver and works.

  Hello

  Good thing Mark a. Kite!

  Anyone having this problem should also consult:

  Control Panel - Power Options - left requires a password on Wake-Up - tick don't
  Require a password - save the changes.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Tecra A11 - 113 - white screen and the cursor of the mouse during the boot

  Hello

  My Toshiba Tecra A11-113 with win 7 32 bit boots with a mouse cursor and the visible white screen.
  I tried to start under different boot options. Mode, safemode, last repair job configuration
  and msdos command only... all these startup options give the same result.

  I also tried with win 7 32 bit dvd, but same result.

  I am able to access the C drive by booting with a linux key, so the data is visible.

  Can someone please give me a solution?

  Thank you

  What happens if you access the BIOS? Is menu visible on-screen BIOS?
  Turn on the unit F2 button and press.
  This should allow you to access the BIOS.

  If you will be able to access the BIOS and see everything as usual, then the screen is OK and I think there is a problem with your installation of Windows System.
  So boot from the Toshiba Recovery disk should help you solve this problem.

  You said that you already tried to boot from the Windows DVD disc is this Toshiba Recovery disk? In my opinion, you use this disk to restore the laptop to factory settings.

• Studio 1535 with white screen and "ERROR CODE: 0321 LCD EDID - EDID EEPROM ACCESS IMPOSSIBLE.

  Studio 1535 (laptop with Vista and NOTE from the ADMIN: tag removed in accordance with the Service Privacy Policy > suddenly, showing no display a few days ago.)  I tried to unplug the power cord and the battery, and make a stop by pressing the power button, but none of these methods have had no effect.  I got nothing else than a white screen, but when I fix a monitor external, everything works fine on the external monitor.

  Also, I have the flashing volume control keys and I was wondering if this could be a clue to what is happening and what needs to be corrected?  The Mute key and the Volume up key flashing on and outside at the same time.  The low Volume key is regularly.

  Then I run the diagnostic test that I had "ERROR CODE: 0321 LCD EDID - UNABLE to ACCESS EDID EEPROM '

  No idea if this could be a backlight or LCD question, question of video chip or broken cable?    Thank you!

  Hi JITeglia,

  I suggest you to replace the LCD LVDS cable on the system first, since it is the cheapest part. If the system is still facing the same issue to replace the LCD screen.

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• start with white screen and a page named do not work

  Firefox always start with most recent screen.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  Do not change the line browser.sessionstore.resume_session_once and change its value to false, but either delete this line or remove the user.js file (recommended if you have not created this file).
  The normal use of this pref is to reload the tabs when you need to restart Firefox (update or install an extension).

• System restore problems - I reboot and press F11, then past recovery mode and load the files then it just goes to the blue screen and a mouse cursor? help please?

  I recently had to restore my HP DV5-1015ea.

  When I turned on the laptop first he loaded everything up and again requested name and language settings user etc.
  Once I did all that he began the normal loading then it came with something error message root I don't remember.
  Now, I try and restart and load windows in black screen, then goes to the blue screen with a cursor and then is that you can do anything else
  someone please help schools starting soon

  Hi Tippumukhtar,

  ·         What is the exact error message or error code?

  ·         Remember to make changes on the computer before the show?

  If you try to restore to factory on your computer then you may have to contact the HP Support for assistance on the issue.

  HP support

  Hope this information helps.