Windows 7 - programs enclosing and are slow after update 12/16/2010__

Similar Questions

• I can not select Windows 8.1 upgrade and other applications after update system

  I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

  Hey Kevin,

  If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

  The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

  If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

  You also mentioned that you can not store of Windows other apps? What happens when you try to install?

  If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

  First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

  Method 1:

  Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

  1. Press the Windows key + F to bring up the Search bar charms.
  2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
  3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
  4. Click the Windows update troubleshooting tool and run it.

  Method 2:

  If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

• I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  I used to be able to click on the sign in tab + and it should open up a window with my sites most visted. After update now if it opens on a blank page. Why?

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Then search for the string "browser.newtabpage.enabled" right click, click Reset.
  Also search "browser.newtab.url" right click, click Reset. Restart firefox. Now it must wok

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• Sytem Slow after update

  My system is now very slow after updating my Windows 7 ultimate

  http://Windows.Microsoft.com/en-AU/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Optimize Windows performance

• CC does not refresh on my Win7 machine. I tried several times and it closes after update download and try to install. Downloaed new application from Adobe, downloaded, tried to install it and received the error 50. Help!

  CC does not refresh on my Win7 machine. I tried several times and it closes after update download and try to install. Downloaded new application from Adobe, downloaded and tried to install received error 50. Help!

  Hello

  as strange as it may seem I'm afraid it is a challenge for Creative tool Adobe cleaning of cloud.

  Sometimes - for some reason-CC "unwilling" work. In this case you should CC completely remove and reinstall by using Adobe Creative cloud cleaning tool. (A try to uninstall by own resources is not enough!)

  I quote:... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3 - CS6) applications. The tool removes the records facility for preliminary facilities of Cloud applications or Creative Suite creative. It does not affect existing installations of earlier versions of Creative Suite or creative Cloud applications.

  Please use: l http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.htm and follow the prescribed sequence of operations

  Sometimes, the "opm.db" file is the culprit. In this case, you must remove it.

  If necessary and for questions and so "open" Please use the cat, plus I had the best experiences.

  Hans-Günter

• Windows Live programs uninstall and reinstall procedure 'live movie maker' work does not error 0 x 80004005

  I installed windows 7. Windows Live programs have always been a problem with my vista home premium, and expected windows 7 would solve my problems.
  There is unfortunately no.
  Filmmaker direct Windows won't start or restart and the code error is 0x80004005
  Have only sought how to uninstall and reinstall, no success and Windows Installer says I still all Windows Live on my system when I removed the
  I have a dell inspiron 530 with quad processor just over a year and the c drive of 500g, no problem of space

  can someone tell me what I can do?
  Thanks hope [and a prayer!]

  Hello
  Welcome to the Microsoft answers site

  (A). the utility use Windows install cleanup to remove Windows live Director and then restart the computer.
  Description of the Windows Installer Cleanup utility
  A link to the below information and to download:
  http://support.Microsoft.com/kb/290301
  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Do not worry. Windows Installer Cleanup Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer Cleanup Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  B. put the computer in a clean boot, and then install it on the computer by downloading.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
  Steps to perform the clean boot:
  1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Reference link.
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
  Verify this information:

  C. Windows Live Movie Maker is part of Windows Live Essentials and could already be installed on your computer. To see if Windows Live Movie Maker is already installed, click the Start button, type Windows Live Movie Maker and see if it appears in the list of results. If not, you can download and install for free from the Web site.
  http://download.live.com/MovieMaker

  D. for more information about Windows Live Movie Maker and the other Windows Live Essentials programs, visit the Web site.
   http://download.live.com/

  E. to know the basics of making a movie in Windows Live Movie Maker, see
   http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  F. for more information on full Windows live movie maker, see these links.
  http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-Movie-Maker

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• The PC HP Pavilion Sleekbook 15: Blurred and static Audio after update of Windows 10

  I was using Windows 10 quite a few months now with no problems. My sound has been clear until this morning when my computer automatically updated itself. After the update, I noticed that my sound (which worked perfectly fine before the update) was blurred and subdued, with a noise static when the music I listened to hit a higher mark. This had not happened before. Not until I've updated. So far, I checked to see if I need to update something new for my audio device in Device Manager, but I was told that everything is up to date.

  Previously, a few years ago I had a similar problem when updating from Windows 8, but rather my audio is completely out. Waiting to see if something like that happen again. I'm not sure what to do on my audio now, but I'm afraid to uninstall my sound card where I can bring him back despite says he's coming back. In addition, I don't know what to do for my specific product. I've read that many others have had similar problems, so if someone could help me I would be very grateful.

  Thank you in advance.

  Hello

  You can update driver Audio IDT high definition (HD) and check?

  Version 6.10.6425.0

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59802.exe

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• Lost minimize, maximize and close buttons after update to 8.1 windows

  Today, after updating my windows 8.1 PC, I noticed him minimize, maximize and close buttons disappeared from my browser. It is an empty box of blue in the upper right now, with no functionality. How can I get my back buttons?

  Hello
  Thank you for your suggestions.
  Fortunately, just after I started this thread the problem magically itself. The problem could be the style - add on. I've changed the style several times to try to resolve this problem, because I noticed that my custom style disappeared as well, and after that the icons reappear.
  Problem solved!

• Update from 8.1 to 10 Windows: Photoshop elements 12 AND 14 freeze after startup

  With the operating system Windows 8.1, I could use item 12 until yesterday. Night of today, my computer has been upgraded to Windows 10 Professional. This morning began Eitems 12 without problems. But when I start the Photo Editor, then the program freezes. After a several updates to read in all of the forums without any solution I downloaded 14 elements such as a trial, but the same problem appears. Also 14 elements freezes.
  

  
  

  All the solutions, or I will buy another Photo program?

  
  

  Thanks in advance
  

  OK, the name of evil is Windows Defender. They just send a new update, everything works perfectly now.

• In Windows Movie Maker - titles and quotes move after placing the transitions

  I use WMM and Vista.  On the Board of directors or the history time line, I placed my photos, adding titles and credits and then transitions.  All the titles and credits moved after placing the transitions.  I made the corrections and then saw the film and decided to remove or add photos.  Titles and credits moved again!  How can I get the titles and quotes from stay with the photo appropriate when editing... remove or add photos?

  There is no way to bind the titles and credits for a specific item. Just
  go to the overlay of the title and track drag left or right as securities
  necessary.

  FWIW... When you add transitions... it causes the clips overlap
  each other... that's why it changes the time.

• Windows 8 stops over and over again, after installing it on a pc windows 7

  Hi guys,.

  I tried to install windows 8 on pc lenovo Windows 7 with 1 GB of RAM, a Core 2 duo processor. When the installation was complete (89% complete) computer stops unexpectedly. Subsequently, it starts with windows 7 and then shutted down in 2-3 minutes. Subsequently, it stops without any notification again and again. Then I tried to install windows 8 with a bootable USB and managed to install windows 8 (before I tried to install a virtual image of windows 8). At the start of windows 8, it is left on for 15 minutes. However, he starts again stop without any notification. Before you start the installation of windows 8, the pc works fine. Before installation, I extend the volume of disk c patition expanding its size to make sure it has at least 16 GB of free space.

  Hi Vishal,

  You can deal with this problem because of the hardware incompatibility. I also suggest you run Windows Upgrade Wizard before installing Windows 8.1. Assistant upgrade is a free download that scans your PC, desktop applications and devices to see if they will work with a later version of Windows.

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Upgrade Wizard: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/Upgrade-Assistant-download-online-FAQ

  Follow the exact steps of this tutorial to install Windows 8 Windows 7

  Windows 8.1 to Windows 7 upgrade

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-7-tutorial

  You can also see this article:

  Upgrade to 8.1 Windows: FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Windows 7 Ultimate does not show wallpaper after update in Vista Business

  I did the upgrade from Vista business to Windows 7 Ultimate and cannot make a wallpaper of work. I can select only solid colors, but not images or slideshows. I googled for similar problems and it seems people offer various solutions, including through 0 to some attributes of registry related to Active Desktop under HKLM or HKCU Software / Microsoft / Windows / CurrentVersion / policies... And also checking / unchecking a few boxes that appear under easy access control panel, but nothing seemed to help. So I'm a bit lost and it's pretty depressing always focus on the black background, knowing tones of beautiful images are waiting for show it :(
  Can anyone suggest what can be done in this case? New - only full office colors can be changed at this point...

  I finally thought to myself... I don't know which two actions helped, but here's what I did:

  1. I made an order of setwallpaper default under various graphic files pointing to Windows Photo Viewer CLSID extensions (before they were pointing to a different CLSID, which I believe was Office Fax Viewer - {ff609cc7-d34d-4049-a1aa-2293517ffcc6}). Here's how I did it:

  -In RegEdit, I searched "wallpaper" and under HKCR\SystemFileAssociations, he found several extensions (.bmp, .jpg, etc) where I swapped the value for a key 'HKEY_CLASSES_ROOT\SystemFileAssociations\.bmp\Shell\setdesktopwallpaper\Command\DelegateExecute' of {ff609cc7-d34d-4049-a1aa-2293517ffcc6} to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}

  - Then he found similar key under HKEY_LOCAL_MACHINE - their values were already set to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}, but it won't hurt to check

  2 then I removed the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Control Panel\Desktop\Wallpaper". This key has an empty value - so I assumed that there is not much use and then shortly after I did it I got my wallpaper of the theme chosen.

• Video clips gel and green screen after update Toshiba PC health

  Recently, I answered a message from my PC Health Monitor utility to download and update software. After that I can no longer to watch video clips online (for example clips youtube freeze and picture Gets Green and freezes internet becomes insensitive requiring stop restart.)

  I tried to download the graphic drivers intel but get a message that says: this application can be run on the PC, look for info from the manufacturer?
  Can you help me please?

  Hello

  Can you please tell us which model of laptop you have, what operating system you use and which driver you updated?

  I don't know if this will help but try to roll back OS to an earlier time using System Restore tool Windows.