Windows 7 requires network password when you try to access the homegroup.

Similar Questions

• What is the required user\password when you try to access the config listener

  Friends,
  
  A bit puzzled by this one!
  
  I'm trying to set up the listener to Apex with Apex 4.0 using TomCat.
  
  When I get to step 7 in the Apex earpiece Instructions
  
  Visit http://localhost: 8080/apex/Config to configure the Oracle Application Express listening port.
  
  When I browse to this place, I'm prompted to enter one will be
  
  What user\password can I enter at this stage?
  
  Thanks in advance for any help you may be able to provide!

  Hello
  I had the same problem - try:

  http://localhost: 8080/apex/listenerConfigure

  Marcus

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• "Time-out period has expired, please login again. Window message will be closed"when you try to access the GS724TP.

  Hello

  I use a GS724TP switch for my home network which has 17 connected devices. For easy management of network I created an HTML page with a clickable map with a link to all my devices inside. When I click on a link a new window will appear with the device management page. This works for all devices except for the switch. It opens a window saying "timeout expired, please log in again. Window will be closed. When I click OK, the window will close.

  The function of java script to open the window is as follows:

  The link is specified as follows:

  href = "JavaScript : viewpage ('http://switch-lan', 1280, 800, 'Y');'"

  The window below opens and I can only click OK.

  

  When I copy the link directly in my browser address field, all right. Could not find any arrangement regarding delays in connection in the switch management page. Also tried it with other browsers, same result. Anyone has any advice where to look? What is a check from sponsor?

  Thanks in advance,

  Erik

  The switch UI probably include javascript code that prevents it from loading in another window and probably translates into the execution of the production of the connection. Just for test, try to change the html link in your page source instead of window javascript now inject the preload and see if that makes a difference

  http://switch-LAN

  and see what happens. Or if you want to debug if the sponsor is the problem, you can do the test in chrome using the Inspector to look at the function, or probably you can check if the switch has the Javascript function block you by an inspector on the UI page switch and check JavaScript function when loading session

• Get Windows security pop for the user name and password when you try to access the APEX

  Hi all

  I hope someone can help.

  I recently installed apex on my localhost, port 8081, and I try to go to http://localhost:8081\apex\apex_admin so I can set up a new area of work, but everytime I try I get security windows popup requesting identification name and user password. I tried my user, credentials, even credentials weblogic xdb credentials.

  Can someone point me in the right direction.

  I am running windows 7 Ultimate, with Oracle 11.2.0.1.0, apex 4.2.5 and weblogic/http server.

  I'm sorry. Don't know where the Apex forum is that's why I put in general.

  Anyhoo, this is now resolved. The anonymous account has been locked. Unlocked it and BINGO... all work.

  Thanks for taking a peek.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• After updating windows 7 Edition family premium my phone regularly crashes when you try to access the folder

  After updating windows 7 Edition family premium my phone breaks down regularly when you try to access the folder - I installed several updates, correct its and also removed countless system software - can someone help please!  It normally occurs when you access my folder music or documents, even if they are empty! I'm using an asus laptop

  There is no free or paid for the software will fix PC problems

  'used cmd & scan' could mean allmost anything.

  Apparently, you have a portable computer, you do not have scource drivers for a laptop computer via windows update (unless this portable machine said) but this laptop manufacturers support site, then visit this site of support of decision makers and reinstall all the drivers available.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• When you try to access the Documents, computer or control panel, Windows Explorer says reboot

  When I try to access my documents, computer, etc. in the start menu, control panel I get the message window Explorer it restarts attempts to restart, but when I try again, it does the same thing. Hope that there is a simple solution to this problem. I can get the internet without problem.

  * original title - Windows Vista startup *.

  Hi Florence.

  The following thread seems to be a similar problem. Take a look at the troubleshooting inside and see if it helps with your problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-Windows-Explorer-has-stopped-working-when/1d1b60d1-9587-466C-A427-511c5691af2a
  I hope this helps.

• How can I block the alert that appears when you try to access the GPS coordinates?

  I develop an application that has access to the GPS coordinates and when I try to access appear a message that says "a JavaScript asked the physical location of your device. You want to offer this to the script? Can I block this alert?

  If you use the HTML5 geolocation API (lots of examples on a google search) instead of blackberry.location.latitude etc., you will be asked only the first time.

• Age of Empires II crashes when you try to access the features of the 'story' and 'cat '.

  Hello.

  I play this game, and when I try to access some features of the game, it crashes for no apparent reason. Trying to access the 'History' function from the main menu causes a crash, but also tries to access 'Cat' and 'Diplomacy' in the game also cause outages, and I don't know why. the game works perfectly also. I play The Conquerors version 1 .0c.

  Never mind. Solved the problem myself.

• Trying to network Windows 7 and Windows XP computers, I get a message when you try to access the XP computer saying that I'm not allowed to access.

  original title: networking

  I am trying to connect 2 laptops via a netgear WiFi router. When you look at the network (in windows Explorer), I see the mobile xp on windows 7) but I get a message that I don't have permission to access.

  I checked the groups and even changed to be sure I was right.

  Checked all the boxes of distance that I could find,

  I even settle down as a user on the XP laptop.

  The remote control has all the laptops listed, but I am limited to connect to a XP Home addition. Can you help me

  Thanks Phil

  See the following topics:
  Networking home computers running different versions of Windows
  Make sure that you assign a static ip address to each computer in the same segment:

  192.168.0.1
  192.168.0.2
  192.168.0.3

  How to assign a static IP address in XP, Vista or Windows 7 - how ...

  On the computer running Windows XP, turn off simple file sharing:

  Open an Explorer window, click Tools > Folder Options > view tab

• Windows Server 2008: WDS error when you try to approve the device to capture image.

  I'm taking a laptop that I have on my desk and it captures is currently running 'C:', which I can deploy it to 20 laptops more.

  I did the Audit mode and install and uninstalled the software required for the business and also have SysPreped machine use OOBE.

  I am approving the device sideways server so that I can do the live image capture and put it in the storage of images on the server to deploy on.  I get the same error when I try to join and approve this device on the server.

  Configuration information
  Server: HP Windows 2008 R2 Ent.
  Laptop: HP Windows 7 SP1 64 bit
  Office: Lenovo Windows 7 SP1 64 bit

  Error information
  Log name: Application
  Source: BINLSVC
  EventID: 524
  Level error
  User: n/a
  Task category: BINLSVC
  Keywords: Classic

  Error text (the machine MAC = XXXXXXXXXXXX)
  _______________________________________________________________
  --------------------------------------------------------------------------------------------------------------

  An error occurred trying to create the computer account for the following device:
   
  Name: HPTESTLPTP
  OU: CN = Computers, DC = esc, DC = local
  MAC address: 00000000000000000000XXXXXXXXXXXX
  GUID: B4F2B8E7FBA1E2119673CE39E75C6B08
   
  Information about the error: 0 x 57
  _______________________________________________________________
  --------------------------------------------------------------------------------------------------------------

  Hi Daniel,.

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  TechNet Windows Server general forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• SIN is not visible and 0 x 80070035 error reported when you try to access the visible computers on the network

  I have a wired and wireless network, managed by a Wireless Linksys E3000 router.  The network consists of 3 computers connected wirelessly, a cabin phone Vonage and a 2T NAS connected wire.  The names of the computers and operating systems are listed below.

  (A) Dave-PC, Win7 Pro

  (B) CPT - PC, Win7 Pro

  (C) DavesLaptop, Win7 Ultimate

  Computers A and B work quite as expected, they allow access to other computers and NAS.  The problems are air-conditioned and equipped with computer C.  Computer C cannot find the NAS and although he finds other computers, it generates an error 0 x 80070035 ("the network path is not found") when trying to access A or B clicking on the name of the computer in a window of the Explorer.  Interestingly, I can remote desktop in A and B via the context menu in the window Explorer of C.  I just spent a week trying to fix this.  I found several references to this problem on the Internet, but none of the solutions posted worked for me.  I have not found any recent posts so I hope there is a simple solution.

  Thanks in advance, Dave

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.