Windows 7 running slow at startup to the top

Similar Questions

• Windows System performance Windows 7 runs slow at startup

  Windows 7 ultimate HP, I ran the fix tool but still slow at startup.

  Moved from feedback

  Original title: % u201cSystem % u201d performance Windows

  Hi Miclewis,

  1 Microsoft Fix it do you try to run?

  2 has there been any changes made on the computer before the show?

  Method 1:

  I suggest you to refer to the article for slow startup problem and check if it helps:

  Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419

  Method 2:

  You may also refer to the article and try to optimize Windows 7:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Windows 7 running slow at startup

  Why my computer is slow to start currently runing windows7?

  earlier model used to take less than 30 s start, but now it takes more than 100 s.

  the model has 3 user accounts too

  Furthermore, I think it has to do something with the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application at a time to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• Dialog box in Windows XP is slow to come to the top

  Problem:

  Whenever I try to shut down the computer after a few minutes of use, the stop dialog box happens immediately, however, when you do a shutdown or reboot or anything using the dialog box after a few hours, the area takes a few minutes to come. Closing is fine, only the dialog box is slow in coming. I ran all sorts of controls on this computer, there was no virus. I looked at another post saying that there could be a problem with the installed graphics card, but it was only for a similar problem and not for this one. He is a professional PC. Any help appreciated.

  Data sheet:

  • Dell OptiPlex 320
  • 3 GB RAM
  • 3.40 GHz CPU
  • 128 MB ATI Radeon GPU
  • Windows XP x 32 OS

  Hi Timothy l.,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

• CHKDSK runs automatically at startup to the top

  XP Pro SP3

  My computer has been running chkdsk automatically at startup for about two weeks. Not always, but often. Generally, it detects and corrects a problem in Phase 1 and nothing in the Phases 2 or 3. -What this means and what I can do about it?

  No, it's not a reason not to use a floppy drive if you have a floppy drive in your computer. The fact that the computer (or hard drive) is only 2 years old is irrelevant; equipment can fail at any time. And Yes, back up your data first. MS - MVP - Elephant Boy computers - don't panic!

• My computer is very slow and I was told that I should clear up until my departure and eliminate the number of programs that run at startup to the top.

  My real problem is to know how to clean the programs that are run at startup to the top. In addition, any other suggestions on how to improve the speed of my computer.

  Manage your startup:

  Open your Start menu-> click on run-> in the command screen type "msconfig.exe"-> in the "system configuration utility", click on a 'service' or 'Startup' tab-> uncheck all the programs you are no longer help.

  The fragmentation

  1. Right-click the C drive.
  1. Click on properties.
  1. Click on the Tools tab.
  1. Click "defragment now".
  1. Click on defragment.

  You can search what process you use cpu and the end of the process.

  Under steps:

  1. right click on the taskbar.

  2. click on the Task Manager.

  3. click on the processes tab.

  4. double-click on the CPU.

  5 is if "system idle process" is max.

  6. If it is not a right click and click on end process.

  Learn "why is my computer running so slow?" and "how to speed it UP:

  http://downloadlk.com/WhyIsMyComputerSlow.htm

  Use the tool: http://downloadlk.com/themosteffectiveregistrycleaner.htm

• Does anyone know how to get rid of the calendar in the window Live on XP? I do not use it, and whenever I check my e-mail, it checks the calendar, slows things down to the top.

  Does anyone know how to get rid of the calendar in the window Live on XP? I do not use it, and whenever I check my e-mail, it checks the calendar, slows things down to the top.

  Thank you!
  Debnfurkids
  original title: get rid of the calendar in live mail

  Hi Debnfurkids,

  I recommend you post your query in Live Mail Forums for assistance on this issue.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• How to disable Yahoo and Windows Live to automatically run at startup to the top

  How to disable yahoo and windows live programs for not runing automatically at the turn on computer?

  * original title - how to disable yahoo and windows live programs for not runing automatically at the turn on computer? *

  Hello

  http://www.tech-recipes.com/Rx/2443/windows_live_messenger_prevent_starting_when_windows_starts/

  Windows Live Messenger: Prevent from starting when Windows starts

  1. open Windows Live Messenger and sign in.

  2. next to your name at the top, click on the arrow pointing down

  3. Select Options

  4. Select general in the left pane of the Options window.

  5. under Sign In, clear the check box automatically run Windows Live Messenger when I log in Windows .

  6. click on OK.

  http://answers.Yahoo.com/question/index?QID=1006022313620

  How can I stop Yahoo Messenger to load at startup?

  When you're connected go to messenger in the top menu bar, then Preferences and then to the general and uncheck the box for automatically start yahoo messenger when I start my computer and then apply ok your way out

• Window is very slow at startup

  Hi team,

  We use Windows 7 Professional and we have 8 GB of RAM, processor core i 5 but system takes too long to open a session (4-5 min.)

  I remove startup program through (ms config), remove the temp, %temp%, and prefects files, run Disk Defragmenter and disk cleanup and has increased the virtual memory.

  Kindly help us out of this problem.

  Respect,

  Laba

  Hello mohamed,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you done any hardware or software changes to your computer?
  2. What is the brand and model of your computer?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check the issue.
  Reference:
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance

  If this does not help, then use method 2.

  Method 2:
  You can also run Microsoft safety scanner to make sure that this computer is free from infection by the virus.
  See this link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• End of 2012 Mac Mini running slow - about to try the following

  Hi all

  The performance of my Mac Mini is trying to drop off and looking for possible solutions to this, I can in this thread: Mac Mini (end 2012) is a little slow.

  A few months ago I updated to El Capitan, and am now on 10.11.3.  Since this update, my system performance fell substantially. I would like to see if I can get my Mini for best results there lately.  One of the questions I think contributes to the Mini, less than excellent performance is my router configuration because of environmental constraints, my Mini has 2 walls and about 50 feet, which separates it from the wireless router.  Currently, I don't think that there is something I can do to help that issue, so for now, I put that side.

  In reading the above thread, I have also still only 4 original GB or RAM and the original supplied with my Mini.

  RAM: 4 GB 1600 MHz DDR3

  HD: I have not changed the HD that came with the mini, so I guess I have the 2.5 GHz 500 GB (5400 RPM) hard drive it is stated in the specifications.

  Lately, I noticed Chrome running progressively slower (to the point of frustration).  Therefore, I uninstalled Chrome and returned using Safari.  As more and more, I use Safari, I think that his performance is what it is.  I tried the Brave and my experience with it is mixed (at least on this point).

  Question: I guess the first thing to do is to increase my RAM to 4 GB - and I will order the RAM here in a moment.  What browser is best to use in this case: Chrome? Safari? Brave? Something else?  Or it is better to run through all these during the upgrade of RAM is installed?

  Let me start with that and I will update this thread as mandate experience.  Thanks in advance for any help and / or thoughts.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• DV7 windows 7 running slow

  computer laptop dv7 runs very slowly - the problem is the following:

  1 I couldn't restore the ghost image - it turns out that the drive is in a dynamic way

  2 I did a backup of files

  3 I changed the drive on the shoulders - the same partition layout

  4 a loading of partition rcovery system

  5 that everything does not work - no possibility to update windows 7

  6 download a patch of sp... from hp on the drive and there is a possibility of renovation

  7 when I start to update the system starts working slowly, the update of the system upgrade 133 over step comes very slowly the next update last for 6 to 8 hours

  8. I downloaded the system recovery discs I erased the disc and shared the partitions on the 1 to C to C and D 400 GB 500 GB, I put the system from scratch and on the same

  9 currently only please update Chrome and Windows 7 without antivirus and other programs, I downloaded some 150 update and the system is still running slow - sometimes stutters mouse, wait for everything to write this update, you can better bezi

  What could be the cause of these problems with the operation of the system?

  Hard checked back into the program to WD - no error.

  I would add that before to convert a dynamic disk to basic everything worked fine.

  I solved the problem.

  I have disabled the economy of energy,
  I put a high-performance computer.

  Simple but helped :-)

  Now, I have no problem with the work computer.

  Thank you for your help.

• Windows 7 running slow will be upgraded to windows 10 clear of problems

  I am running windows 7 Professional 64-bit, but it raised a number of questions and is slow.

  The standard way to solve this would be to do a clean reinstall.  If I want to upgrade to Windows professional 10 this will have the same effect, or I have to re - install Windows 7 first before the upgrade.

  Also, on my second computer I am also running P 7 Professional but the 32 bit version.  Can I download the Windows Professional 64-bit for this machine 10 and doing a full install instead of upgrade Windows 7 32-bit to 32-bit Windows 10.

  Doing one in put place at level will not solve your performance problems. In fact, this could worsen.

  You can perform a clean when install upgrade to Windows 10:

  

  Click option to change what to keep

  Do not select anything

  Click Next

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  You can try to solve your problems of performance of Windows 7 by using the following tips:

  How to speed up your Windows 7 system:

  http://techingiteasy.WordPress.com/2010/01/11/speed-up-your-system-for-the-new-year/

  In regards to your second computer, yes you can, see instructions how to:

  How to: switch from 32-bit versions of Windows to Windows 10 64-bit

• Use Group Policy in windows server 2003 to remove startup in the start menu to xp pro user

  Dear all,

  I have a windows 2003 server and I have a domain controlor.

  I users using win xp in this area, I had some policies on the server to prevent users in a few changes such as workstation side open Explorer and using the dos command for example and everything is ok, I have a problem I can not remove the startup option in the start menu , I delete all the startup programs appear as disable, but when double clicked, open Solution Explorer.

  My question is: How can I remove the startup in Start menu?

  Thank you

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my display settings keep returning on 2 screens at startup to the top

  I have attached a second monitor to my Sony laptop.  The 2d display monitor used to iterate through a docking station Kensington DisplayLink.  For some reason, the docking station picks up is no longer display for the #2--si monitor I recently started to connect the monitor directly #2 on my laptop.  Now every time I disconnect the monitor #2 to try to use the laptop with the Moose #1 display attached - after startup, it comes in white.  I discovered the Dungeon of display settings back to the #2 monitor, as the main display with the office displays only on the monitor #2 - it's why my laptop screen is blank - unless I'm reconnect the 2d display whenever I start.  But it is not practical and the net effect is that until this has been resolved I can't use my laptop away from my office.  I keep resettingt the display settings in the control panel to a single monitor, but it keeps going back to 2.  What is the solution?

  Hi, Msnsurf101,

  Check your settings in the Bios

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. For more information, see the documentation provided with your computer or go to the website of the manufacturer of the computer.

  

  Warning

  Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  How to switch monitors primary & secondary

  http://www.ehow.com/how_5919616_switch-primary-secondary-monitors.html

  Uninstall of display adapters

  Start > right click on computer

  Select manage

  Click on continue for UAC window (Vista or 7)

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the adapter and select uninstall

  Restart the computer

  Windows will reinstall the adapters

  See the updated chipset manufacturer site