Windows 7, scanner and printer Brother

Similar Questions

• I am able to scan from the scanner and printer, but can't seem to scan onto computor

  I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.

  Hello

  I suggest you to update the latest drivers for the scanner\printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/323166

  It will be useful.

• Conflict between the scanner Epson Perfection 1260 Scanner and printer HL-2070N

  My brother Hl-2070N printer disconnects after that I have used my Epson Perfection 1260 Scanner.  If I clear all and close windows 7, I am able to print from the printer until I have to use the scanner.  How can I solve this problem?

  Hello

  Thanks for posting your query in Microsoft Community.

  You did changes to the computer before the show?

  According to the description, it seems that you are facing problems with the printer as it goes offline and print normal until you restart. I'll be happy to help you with this problem.

   
  You can try the following methods and check if they help:
   
  Method 1: I suggest you run the Microsoft Fixit from the link and.

  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/en-us

   
  Method 2: You can try following the steps in the link and check if it helps:

  The new status of the printer is "offline" when you delete a print queue
  then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  In addition, refer

  The State of the printer is offline or paused. (For Windows®)

  http://support.brother.com/g/b/faqend.aspx?c=CA&lang=en&prod=hl2070n_all&faqid=faq00002646_000

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Scan multiple pages to a pdf file using Windows Fax & Scan and a Brother MFC-7420 8

  When I try a new scan with the charger (one side of scan) selected, the scanner makes each page in a separate file which is read by the photo rather than Adobe software.  In addition, the Brother scanner has been reset so that it will no longer scan multiple pages into a single file using my brother responsible program in my old computer with Windows 7.  How can I back to simple B & W scan multiple pages into a single Adobe pdf?  Thank you

  Hello Norman,

  I would suggest trying the following steps and check if it helps:

  Scanning from the charger:

  Step 1: Click on the 'Start' button on your desktop and type 'brother' in the search field. Point to the name of your MFC and select "ControlCenterx" (where "x" is a number one digit) to load the ControlCenter application in the system tray to the left of the clock on your taskbar. Double-click the "ControlCenter" icon in the system tray.

  Step 2: Click on "Configuration" and select "Scan". Select 'File' as the type of scan to open the scan to the Configuration window.

  Step 3: Go to the 'Touch' tab and choose "PDF (*.)" (PDF),"" # no multi-page Tiff compressed (*.) " (TIF)"or" # Tablet multi-page Tiff (*.) " (TIF)"under File Types, as these types of files allow analyses of several pages.

  Step 4: Place the entire document in the ADF on the scanner and press the button "Scan" of the machine. Press the 'Arrow' key to select 'File' and press 'OK '. Press the button 'Start' to scan to a single document.

  Scan of the glass:

  Step 1: Lift the cover of the document on the Brother MFC, place the first page face down on the glass and close the lid.

  Step 2: Click the 'Start' button on the computer and in the search box, type "scansoft. "ScanSoft PaperPort" and select "PaperPort."

  Step 3: Select the Brother MFC as the scanner, and then select a profile, such as "B & W Document". Click on "search".

  Step 4: Remove the glass on the first page after that latter was analyzed and place the second page on the glass. Close the lid and click the button "Scan more Pages.

  Step 5: Browse all pages in the document one at a time. When you are finished, click the Finish"" button.

  Hope this helps, simply reply to get help on Windows.

• How to obtain the windows user name and print it in Doc. HTML using ASP?

  Hello..

  I have a network that is content AD and page Intranet Small
  I want to display the welcome message when the user opens this page
  the message will be "welcome % unsername %.
  username = the logged in (for windows) user name
  But how to get and print the username in HTML using ASP?

  Hey hammad T. Fakhouri,.

  The question you posted would be better suited in the Asp.net Forums. I would recommend posting your query in the Asp.net Forums.

  http://forums.ASP.NET/

• Trying to download my pictures from an iPhone 3G, the link to user advanced in XP Windows Wizard scanner and camera does not work. Is there a solution?

  There are about 1500 photos in the film and about 1000 other photos.  It worked when the film was smaller.

  I'm not sure if you are saying that the wizard will not start
  or the wizard launches, but will not download pictures.

  Might be worth trying to manually launch the Scanner and
  Camera Assistant:

  The executable for the scanner and Camera Wizard is:
  wiaacmgr.exe

  If you connect your camera via USB, turn it on and and
  Reach... Start / run... type the following and press on... Come in...
  To start the wizard:

  C:\Windows\System32\wiaacmgr.exe

  Also... with the camera connected and turned on... If you
  Reach... Start / my computer... is the recognized camera
  with the letter t? If_Yes_you can copy and paste photos
  from there to a folder on your hard drive.

• When I versteckte UN of a page of the document, it parts of four is scanned en! Comment to solve the probleme.sur windows 7 pc and printer epson sx 105

  When I versteckte UN of a page of the document, it is scanned in 4 parties.comment solve this problem. PC windows 7 epson sx105 printer

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• where & how do I download the program of the CTF for Samsun SCX-4100 multifunction printer, scanner and printer to a new processor

  went on the internet and downloaded from samsung, but only the printer / copy party functions cannot

  find how to activate the scan function?

  Hello

  As OEM Samsung is responsible for the good operation of the printer and scanner as well as their
  drivers provided. Check with the support of Samsung, their documentation and online drivers.

  Good luck, you need to update or reinstall the latest driver. Special attention to the
  documentation, as it is very easy to miss a step.

  Samsung - Support - click on the link "Computing."
  http://www.Samsung.com/us/support/main/supportMain.do

  Samsung - visit your country Site
  http://www.Samsung.com/us/common/visitcountrysite.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 5520 Photosmart, Laserjet 252dw: copy with separate scanner and printer

  I have a Photosmart all-in-one Scanner/printer and a new printer Laserjet. I am very satisfied (also pictured) quality of the laser printer, but I didn't buy an all-in-one again. So my question is, if it is somehow possible to copy of the Photosmart directly to the Laserjet Printer?

  Thanks in advance

  Hi @egau,

  Welcome to the HP Support forum.

  I understand that you have a HP Photosmart e-all-in-one 5520, printer and a printer HP Color LaserJet Pro M252 and want to send copies of the 5520 directly to the Laserjet Printer. I would like to help with that.

  There is no way to copy directly from the 5520 to the Laserjet Printer because they have no way to communicate with each other. What you need to do is scan the 5520 to your computer, and then send the scanned file to print the Laserjet Printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.

  RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH.  I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE IS USED.  LAURYS ALL OK.  THE MAJOR PRINTING PROBLEM IS WITH MY ONLINE BANKING WHEN I TRY TO PRINT STATEMENTS ETC. ON THIS SITE.  I HAVE CHD'D WITH THE APPROPRIATE SITE TECH PEOPLE AND THAT THEY HAVE NOT HELPED, SAME PROBLEM,...  WOULD APPRECIATE ANY SUGGESTIONS OR HELP WITH SIMILAR PRINTING PROBLEMS!  e > j > t

  Display uppercase is considered shouting & your message is difficult to read and can be ignored by many.

  Say the HP support? Often with an HP printer, the solution the easiest is to unplug the printer, uninstall the HP printer via Add/Remove, runDisk cleaning software and restart. Then download/install latest drivers/software from HP and only connect the printer when the installation says.

  Of course its possible allways the printer failed.

• How to scan a document multi-page with preview in macOS Sierra with Scanner and printer Dell network?

  Hello, I know that macOS Sierra had a big problem with PDF / scanning due to an update to the pdf engine. Here we have Dell printers / scanners Dell C3765dnf Color MFP. We usually scan with Preview app (import of the device). But with macOS Sierra, the scanner scans all pages but the first page is available after the scanning process. Maybe can someone help?

  Have you tried scanning with Capture of Image?

• How can I network a Mac and a Windows 7 set for printer sharing computer?

  I have a desktop computer with Windows xp, 32-bit, one with Windows 7 64 bit and a Macbook, can I configure them on a network to share a printer using my wireless D-Link hub?

  original title: home network

  Hello

  I suggest you to see link below and check if it helps.

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows

  Install a printer on a home network: http://windows.microsoft.com/en-US/windows-vista/Install-a-printer-on-a-home-network

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions

  Hope this information is useful.

• I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

  original title: file and printer sharing problem

  I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

  Hello

  What exactly happens when you click the icon of the computer on the network map? You get the error message?

  If possible after return the screenshot of the network card that could help us help you better.

  See the bottom of the articles that might help you resolve this problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Use the network adapter to manage and troubleshoot networked devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

• Windows 7 Canon MP500 printer does not

  "Printer printer Windows 7 Canon MP 500 will not work, it comes up with the message" not of respondimg ", but the works of scanner and printer works when his hook

  at a top of the tower with Windows XP have tried updating drivers, but they want to charge $29.00 for drivers update programme.any solutions?

  You do not pay anyone for a driver update program.

  If win7 drivers/software are available they will be freely available on the support site for Canon, as the manufacturer of your hardware.

• is - it version XP from Microsoft scanner and Camera Wizard work on Win 7?

  original title: the version XP from Microsoft scanner and Camera Wizard work on Win 7?  It is much more useful to manage his photos.  The version of Win 7 does not even recognize the camera.

  I don't know what else to say.  I have an old XP machine, so I used that.  Child's play for what I wanted to do.

  Thank you for volunteering J, for this quick reply.

  My question gets pictures from a camera to a PC, my problem is that the XP version is very useful, and the version of Win 7 is not.

  Where the question: can I use the XP version on Windows 7?

  Concerning

  John

  =====================================
  You are welcome.

  Sorry for this misunderstanding.

  You have said that your camera is not recognized then
  I assumed that you were unable to download your photos...

  Anyway... as far as I know... the XP Scanner and camera
  Wizard cannot be used on Windows 7.

  The info can be useful to experiment.

  Windows XP scanner and Camera Wizard is:

  wiaacmgr.exe

  On a Windows XP system, the path to the file is:

  C:\Windows\System32\wiaacmgr.exe

  There is also a copy of the file located in the:

  C:\WINDOWS\system32\dllcache\wiaacmgr.exe

  I wonder what would happen (if there is one) if the
  wiaacmgr.exe file has been copied from the XP system
  and transferred to the Win 7 system?

  If you decide to experiment with the wiaacmgr.exe file...

  Proceed at your own risk *.

  On a XP system if a scanner or camera is connected
  and turned on... you can left-click the wiaacmgr.exe
  file (even if it is copied on the desktop) and it allows to detect
  the device.

  Will it work if copied on the Windows 7 Desktop? I have no idea...