Windows 7 Setup fails because of pilot missing (HP Pav 500 - 417ng with Win 8.1)

Similar Questions

• Windows Update: Windows update Setup failed...

  Install Windows 8 Pro upgrade, Windows 7, the two 64-bit, yesterday. Installation went well and everything seems to work. I had to reboot tonight and got the message "Installing Update 2 of 11, (etc.) do not disconnect or turn off your computer. Do not touch anything during the time that he finished all updates 11. Restarts and then delivers the message: 'Windows update Setup failed. Restoration of the changes. Do not turn off your computer"the whole process takes about 30 minutes before I was back at the lock screen and could connect.
  Go to Windows Update in Control Panel and it indicates what it y 11 important available updates, which wouldn't be fair because they do not have. Then, I simply restarted... nothing more. Received the message "" Installing Update 2 of 11... "." as before, restarts and then get the message: 'Windows update Setup failed. Restoration of the changes. Do not turn off your computer"all over again for 30 minutes.
  No idea where to look for that could be the cause of the problem? Anyone else had this experience?
  TIA
  J.

  Cooler Master Elite 430
  ASUS P8Z68-V PRO/GEN3
  Intel Core i5 2500 K 3.30 GHz
  ADATA 8 GB DDR3
  EVGA GTX 560 1 GB PCIe
  1 TB Seagate Barracuda 7200 RPM
  P/S: Corsair GS800
  Windows 8 Pro 64 bit
  ... by Digital Storm

  After another session of 4 hours with MS display driver chat and remote access, that we got all of the updates to install by removing the nVidia card. Which caused the conflict. I have never had any problems with nVidia drivers before that. So everyone can learn from my experience is 306.97 nVidia display driver and the problem edits are KB2756872 and KB2770917 for Windows 8 64-bit.

• Cannot sign it says: "signing in to Windows Live messenger failed because the server is temporarily unavailable. "Please try again later ' Error Code: 8e5e02011

  When I tried to log in it freezes for a while, then he said "signing into Windows Live messenger failed because the server is temporarily unavailable. "Please try again later".
  Error code: 8e5e0211

  Hi Cera,

  In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.

• Windows 7 activation failed because no system on the SSD before installation.

  Hi, I just updated my computer and I have installed the version of win7 upgrade.

  I got the error activation failed because there was no system on the SSD before installation.
  Instead of having to do all that again (install xp and win7 or reinstall win7 then win7) I did a registry change
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OOBE has changed the 1 to a 0 and restarted
  Entered the CD - Key and got the error
  [code]
  On a computer running Microsoft Windows non-core, run "slui.exe 0x2a 0xC004F061" to display the error text.
  Error: 0xC004F061
  [/ code]
  activate Windows then told me, "the product key you entered cannot be used to activate windows on this computer".
  Then I tried the thing about the phone call.
  has chosen country as the Iceland's nearest.
  received 2 numbers
  800-8236, I get the message that this number is not in use.
  + 47 23 162 126 there I have the language Norwegian (or something) answering machine
  What can I do?

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004F061

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Been put to update to Windows Pro 8, but now a pilot missing!

  I'm really confused right now. I have upgraded to Windows 8 Pro Friday because my Toshiba Satellite M505-S4940 was supposed to have been ready and compatible. Everything went a lot until I realized that I don't have a wifi connection. It does not show even the scale of the airplane on the network connections page mode.

  I checked my devices, noticed that it was necessary troubleshooting for my laptop, downloaded missing drivers, but am still missing a driver... the driver for network controller. I checked on the Toshiba support for drivers, but no Windows 8 say page.

  Which one should I download? I agree, download the driver for Windows 7?

  Any help is greatly appreciated as I have never encountered this problem.

  Thank you!

  Hello

  You could try the driver Win 7 and if necessary, use the Compatibility Mode...

  SETUP\Install right-click and select Properties, Compatibility tab is at the top.

  Down is a Compatibility Mode check box and a drop-down option.

  You might also check with the manufacturer of the controller and see if they have anything to win 8.

• Windows 7 Setup fails with «the installation package cannot be opened...» »

  We receive the error message "this installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. "the installation of accessdatabasedriver.exe (database driver Access 2010).

  I tried to log in as a local administrator without success.

  I ran the diagnostics for Windows install and it says that nothing is wrong.

  I tried to disable the anti-virus software and scan for malicious software without success.

  Any ideas?

  The tracking information is stored in the temp folder:

  = Registration began: 14/07/2015-14:57:24 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\Windows\SysWOW64\msiexec.exe =.
  MSI (c) (0C: 88) [14:57:24:286]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (0C: 88) [14:57:24:286]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

  MSI (c) (0C: 4) [14:57:24:301]: Resetting cached policy values
  MSI (c) (0C: 4) [14:57:24:301]: value of strategy Machine 'Debug' is 0
  MSI (c) (0C: 4) [14:57:24:301]: * RunEngine:
  Product: AceRedist.msi
  Action:
  Command line:
  MSI (c) (0C: 4) [14:57:24:301]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (c) (0C: 4) [14:57:24:317]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (c) (0C: 4) [14:57:24:317]: Note: 1: 1324 2: Program Files (x 86) 3: 1
  MSI (c) (0C: 4) [14:57:24:317]: MainEngineThread returns 2
  = Recording stopped: 14/07/2015-14:57:24 =.

  Found the problem and the solution.

  I found that all msi packages would fail.  I tried to install another package as a .exe and received the error message: "the folder path ' program files (x 86)" contains an invalid character.

  This brings me to wonder about the long file name support.  After research, I found the registry key 'Win31FileSystem' has been set to 1.  This system was originally setup to be able to save files on a computer embedded Windows 3.1 (don't ask). It turns out that having this disables running or is not compatible with the appointment of "Program Files" (x 86)  Definition of this registry key to 0 and reboot solves the problem of msi.

  Thank you

  John

• Windows Update has failed because of an error 57 a

  Whin I check for Windows update, it's showing an update of security for MS Office 2013 for around 800 MB. But after download it says who settle failed due to the error 57A. You have any resolution for this... ? It aims to prevent my update of Windows 10. :(

  http://www.slipstick.com/Tutorial/repair-Office-Outlook-installation/

• Windows update Setup fails with error code 80070641.

  my laptop will not install updates. How can I install updates?

  I tried all the things that windows says to do but none of it works

  have now 19 important updates that it will just install, any help would be greatly appreciated!

  Thank you

  Original title: Vista-error code 80070641 641

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/updates-not-responding-error-code-80070641/446c108b-3222-46f9-ad2c-05dd231fd071

  J W Stuart: http://www.pagestart.com

• Windows Update keeps failing because 8000ffff and error codes a 80071, 90

  This is a new installation on a new hard drive I just bought. There is no other program installed yet including any antivirus. Please help I don't know what to do.

  Hello

  The following articles might help you solve this problem.

  Windows Update error A 80071, 90
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80071A90
  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/946414

• Registration to Windows Live Messenger failed because the service is temporarily unavailable, error 800488fb _

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Please publish on Windows Live Solution Center, Messenger discussion forum:

  http://windowslivehelp.com/forums.aspx?ProductID=2 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows failed to load because hal is missing or damaged

  I can't start my computer because its telling me that windows could not load because hal is missing or damaged. I tried to fix it by installing the cd to repair, but I can't restart the computer. I tried to choose different options in the menu of options advaced bood, but he always tells me the same message "windows failed to load because hal is missing or damaged. Help do not know what else to do!

  Hi Dimples328,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2: I suggest you try the steps from the link below and check if it helps.

   

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Let us know if that helps.

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• pilot missing where it is

  c drive was full so installed new more got drive not passed windows 7 Edition family to year and windows 7 edition Professional charge unrelated to my hub high speed. error 651 hardware required relocation or the pilot missing. as it works well with the old drive there is only one thing no driver windows .reloaded twice more same error. (Are they still using us as guinea pigs to sort the bugs in versions of windows is is it just a mistake for once.) Somehow what is the fix

  Hello

  Thanks for posting your query on the Microsoft Community.

  If I understand you correctly, you cannot connect hub high speed and get error code 651. I suggest you to try the steps below and see if it helps you to solve the problem.

  First of all I suggest you to reset tcp/ip on your computer, to do that you can visit the link below.

  How to reset the Protocol Internet (TCP/IP)
  
  http://support.Microsoft.com/kb/299357

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
   
  I suggest that power you cycling your Modem and router might solve the problem, here are the steps:
   
  1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
  2.first, turn off your router and wait a few minutes.
  3 turn off your modem.
  4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
  5. reconnect them and ensure that there is no connection drop between them.
  6.now, turn on your PC and let it boot.
  7. turn on the modem first, and after it is initialized, switch on the router.
   
  You can also try disabling the firewall/security software as appropriate and check if it helps:
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  I suggest also refer to this link that talks about the same issue:
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/af815085-fc76-458A-8116-98a06be817ea/

  Note: Ensure that you enable the security on your computer program.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Default windows update Setup. Windows 8

  I only have the new computer for two days, and today it stopped working he tried to update windows for the last 2 hours. It says "windows update Setup failed. "To undo changes do not turn off your computer" and I can't do anything other than that. I tried to turn on and off and it goes back to the same thing. I don't know how to get to a safe mode to do anything else. All very grateful advice

  Hello

  I would like to know did you do with the last changes made to the computer before this problem?

   

  This problem could be due to either corrupt and updated Windows components or maybe there is a conflict between third-party applications or external devices.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us
   

  System restore warning: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Clean Boot WARNING: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Hope the information helps, please answer with the State of the question for any further assistance.

• Windows didn't start because the following file is missing or corrupt: __\WINDOWS\SYSTEM32\CONFIG\SYSTEM___YOU CAN ATTEMPT to REPAIR THIS FILE BY STARTING WINDOWS SETUP using THE ORIGINAL SETUP CD - ROM__SELECT 'r' in the first screen to start repair

  This problem is on my laptop and I can not further only the screen with the above opinion.  I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.

  This problem happens almost daily.

  You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods.  This will reduce the time to resolution and frustration.

  Something like this example:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/83d5c57f-9836-4f3a-bec8-04c7d81861d3/

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!