Windows 7 Setup will not recognize SSD

I just built a new computer and I want to install 64-bit Windows 7 Professional on an Intel X - 25 M SSD 80 GB.  I do a fresh install on a new drive.  When I arrive at point in the installation of Windows 7 that asks you which drive I want to install the OS on, it does not show the Intel X - 25 M.  It will show my other drives, however.  If I unplug the other drives, it shows just a blank window instead of show the Intel X - 25 M.  I get a message saying that it could not find a valid signed driver.  I bought the retail version of the SSD, not an OEM.

I use a card mother Gigabyte GA-X58A-UD7 and an Intel i920 CPU.  The BIOS of the motherboard has no problem detection and identification of the X - 25 M.  I have the X - 25 M configured as an IDE.  I updated the firmware of the SSD, but it did not help.

Windows 7 compatibility page shows no problem of compatibility with the X - 25 M, but apparently it needs a signed driver, and I don't know how to get a.

Any suggestions?

It shows the SSD at all? I would check to see that it is indeed to be picked up by the BIOS, and if not, check the cables.
Sometimes, the Windows installation can chuck a fit when it detects a disk with a sector of boot/MBR not valid and won't install it. To resolve this problem, you can try the following
1. start Windows 7 disc.
2. when the Welcome screen is displayed on the Windows installation, press SHIFT + F10, which will display a command prompt.
3 type 'diskpart' (without the quotes) and press ENTER.
4 Type "list disk" and press ENTER.
5. If all goes well, you can see your SSD in the list. You should see a number identifier. Now type "select disk X" (where X is the number of your SSD) and press ENTER.
6. type 'clean' and press ENTER. He will write an empty MBR, YOU WILL LOSE ANY DATA ON THE SSD if you had anything on it.
I hope that one of these tips helps you:
)

Tags: Windows

Similar Questions

  • For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

    For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?

    Hello DavePerdue,

    Thank you for your message.  Click HERE for your driver from the HP website.  It seems that it just took some time to get the driver online and available for download.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Photo Galley will not recognize the DV camera

    Windows photo gallery does not recognize my camcorder DV

    I used another program to import but want to use a Windows because it has several editing options, transistions fades etc.

    Hi granny smith.

    ·        What happens when you connect the digital camera to the computer?

    ·        You receive an error message or error code?

    Check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

    i. click on start, type devmgmt.msc and then on enter.

    II. research the name of the device

    You can also check the links below: import video from a DV live camera:http://windows.microsoft.com/en-us/windows-vista/Import-live-video-from-a-DV-camera

    Import analog video to your computer by using a DV camera:http://windows.microsoft.com/en-us/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Windows Media Center will not recognize TV tuner Digital stations live

    I am trying to display and record all my content from TV on my laptop using my hybrid analog/digital TV tuner card. So far, the WMC recognizes the analog content. But my cable provider provides many channels of ClearQAM I can see on my TV without a decoder, just using the QAM tuner in the TV. My tuner card is supposed to recognize the QAM signals, so I should be able to view all unencrypted content (users) that comes through the coaxial feeder on my portable tuner. But no luck so far. When I set up the TV signal in WMC, the menu only listed setup analog cable my cable box, even though I know that my cable company provides digital content.
    I had actually upgraded my Windows Media Center to include the TV pack (downloaded from Engadget) but even this last version does not recognize digital channels. If I try to change the Program Guide and add them manually, all I get is static when I select the. I am at a loss to know what to do next. Is this a problem that should fix a new TV tuner? I heard good things about the AverMedia card, maybe I should just go that route? Can anyone recommend a new tuner card?

    Hey,.

    See this link:

    http://mymce.WordPress.com/2008/11/01/Vista-Certified-logo-TV-tuner-cards-vs-Vista-MCE-ready-TV-tuner-cards/

    This has all of the compatible TV tuner cards.

    See you soon.

  • Windows XP Setup will not accept my product key

    I am re-installing ona XP laptop, but the installation of Windows XP will not accept my product key. I have an OEM of a Dell PC product key that is no longer functional, and a update product key which is not null else, neither of which works.

    I can't even do the installation to achieve the activation step.

    Link to the entire conversation:
     
    Huh?
    • You have a Dell system, and with this Dell, you have a product key for Windows XP (edition?) - it would be an OEM key be used with an OEM installation CD.
    • You seemed to have bought (where?) a copy of "Retail" / license for Windows XP (edition?) - which would have its own retail product key to be used with a retail installation CD.
    What does not work:
    • using the CD to retail with the product key OEM on Dell machine sticker
    • by using the product key from retail with OEM installation media which might come with the Dell printer
    • have an installation CD OEM with an edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc.) and you try to use the product key OEM for another edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc) (editions must match, House can is complicated in this grouping too.)
    • have an installation CD retail with an edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc.) and you try to use the product key from retail sales to another edition of Windows XP (Home and Professional vs Media Center 2002 vs Media Center 2005, etc) (editions must match, House can is complicated in this grouping too.)
    So is that what you are trying to do?  Why did you buy the CD/product key for sale at retail and the editions correspond?
     
    If you're not at the point where you will have to enter the product key - why do you think that the product key is the question? Hah

    --
    Martin Stanley
    MS - MVP
    --
    How to ask Questions the Smart way
    http://www.CatB.org/~ESR/FAQs/smart-questions.html
  • New Windows Mobile 8 will not recognize Ipod touch

    I go to a PC from a Mac.  My new laptop (bought Jan 11) runs under windows 8.  The computer does not recognize my ipod touch (4th generation).

    When I plug it I get: "USB device not recognized. The last USB device that you connected to this computer has malfunctioned and Windows does not recognize it. »

    I tried on windows phone 7 my husband and got the same error.

    My ipod has never been used on a PC.

    I downloaded & installed iTunes successfully on 12 Jan.

    Problem solved with a new cable!  Plugged in and works perfectly.  Phew!

  • Windows vista Setup will not accomplish

    replaced the hard drive, try to install windows vista on a dell vostro 1700.  He will arrive at "finish installation" and just sitting there.  eventually the screen is empty except for the cursor... why it ends normally install?

    E-mail address is removed from the privacy *.

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

    Contact Dell at the above link for any problems with their recovery process.

    It's Dell recovery, not Microsoft software/process of.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    If you encounter problems, contact Dell.

    See you soon. Mick Murphy - Microsoft partner

  • Windows 7.0 will not recognize file extensions indesign cs5

    I can't get windows 7 to recognize the indesign files. I can only open an .indd file if I open it in indesign. If I click right/open with , then navigate to indesign.exe WIN7 won't always recognize or let me open.

    No need to apologize. I fight with this stuff all the time - it is sometimes easier to just go home and do the work from there that it is an attempt to explain the sysadmin that recent action by group policy took the rights to install the fonts from my special local administrator account. (Note that I does not even get him to cancel the action...)

  • Windows Vista Setup will not download files

    Whenever I try to download a file from internet, it stops at 99%.  He did it only for a couple of months, so he must have had a problem with an automatic update or something.  All I have this problem and know how to fix?

    Hello

    To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
    connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
    migrate to it and another to test and difficulty).

    It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
    for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
    Make sure that the account administrator.

    Try your downloads in the new account - the downloads work in the new account?

    If necessary later this is the process to fix a damaged account or migrate to a new.

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    ---------------------------------------------------------------------------------------

    Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ---------------------------------------------------------------------------------------

    Then reset IE

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had
    on this machine, including those that you have uninstalled (they leave remnants behind which emits causes).

    Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

    IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK

    IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK

    Close and restart IE or IE with no addons

    Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question. (Toolbars are BHO)
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only. If you ever think malware update and then run it as
    a scanner.
    http://www.Malwarebytes.org/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Have a laptop with windows 7 ultimate upgrade bios installed, barrttery is dead and now it tells me to activate windows again, but will not recognize the key to upgrade

    This can be used for a clean install, I didn't install anything, said

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Windows 7 will not recognize the dvd drive

    Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

    It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

    It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

    What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

    Hello

    If the drive is viable:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951


    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Windows 7 will not recognize driver for HP Scanjet 5370c scanner

    I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

    Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

    Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

    http://www.Hamrick.com/

  • After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

    After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

    Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

  • After reinstallings windows xp on dell XPS 420, he will not recognize modem and modem support moved disk

    I have a Dell XPS 420 I got help from this forum - reloaded Windows XP - reformatted successfully in car and now have Windows XP on the drive.  When I try to connect to the internet and set up this internet connection - will not recognize the modem.  When I put the disc inside modem will automatically the configuration menu of the computer.  I don't know what else to do.  I have AT & T internet service that worked perfectly before the reformat Windows XP works fine.

    Hello

    Refer to this link and check:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/XP-SP3-wont-recognize-internal-software-modem/06471daa-c761-4CE3-a8a6-ee01f5629852

    It will be useful.

  • My windows will not recognize my CD/DVD drive

    My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

Maybe you are looking for

  • Synchronize the ctr1 at ctr0 (generate outputs freq) via the signal of export

    I need help to configure the output channels of meter on my card pxi-6723. Here's what I'm trying to do: -have the possibility to synchronize the ctr1 exit toward ctr0. Note: ctr1 must begin on edge increase or decrease output ctr0. -be able to chang

  • Does not start after installation of the graphics driver

    After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  • BlackBerry MDS Tomcat

    Hello I'm developing an application using MIDlet MIDP 2.0 Server/blackberry.The application to communicate with a server throw Servlets (httpConnection) using the WiFi.I tested my application with the Simulator provided by Sun Java and it's ok.I want

  • Creating a new text brush

    I've created several brushes in the past for my tattoo photos, but when I try to create a new one now the predefined shape set is not clickable... don't know what I'm doing wrong...The steps that I use...1 NEW2. Enter the new text3 EDIT4. define a Br

  • ESC, space, then enter not generating an event KEY_RELEASED

    There is no event generated for esc, space and enter keys for KEY_RELEASED events. An event is generated for KEY_TYPED well. Is - this intentional or a bug? Are there workarounds? Thank you