Windows 7 STUCK of updates
Hello
I had posted a question on this at the time and received a response which has worked so far. See below
I recently did a new install of Windows 7 pro and had the problem installing updates. So I followed the
steps below and I tried to install the KB3020369 and received the error so I then installed the KB3172605 with no.
problems. After doing this, I tried to continue with the updates and it took forever so I tried to install the KB3020369
same mistake. There is an KB976902 update that is on the machine and I can't uninstall. Either I'm stuck way check
updates for more than 24 hours. Will begin again this afternoon and let it run all night. Any suggestions
Thank you
Karen
Hello klmorgan-Office [365].
Your question about the Microsoft community received a response from Canadian technology.
KB3172605: |
---|
https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU
64 bit
https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU
- After rebooting your computer, wait for about 10 minutes until that Windows Update performs its tasks. Do not use the computer for other purposes during this waiting period.
- Start Windows Update. It will take that a few minutes to come up with a list and download updates you select. The process is quite normal because it was always from that moment.
If your computer has not been updated for a long time, it may take longer.
Read this response on the Microsoft Community.
--------------------------------------------------
NEXT STEPS *.
This answer was helpful? Give Canadian Tech of congratulations!
[Vote as helpful]
Canadian Tech response answered your question? So let the community know!
[Mark this answer as your answer]
You want to unsubscribe from this thread?
Click here to go to the thread, click the original message, and then click Stop messages.
* Login required. When you open the thread, you will see that your action has been automatically saved.
* The position proposed by the facilitator at the appropriate forum category (for Windows |) Windows 7 | Programs Windows | Windows 7 | Updated, backup, recovery &). **
This is probably your solution:
Tags: Windows
Similar Questions
-
Windows Vista stuck in update 3 of 3 loop after updates.
updated the title: Can not boot Vista after updates
I'm stuck in the update 3 of 3 loop and cannot restore my system by using the system restore or the Vista CD... Can anyone help? Y at - it a solution or should I reinstall? thanksRemember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi royfos,
Do you have a code error message when you try to run the system restore?
Check if you can get into safe mode. If you manage to get into safe mode, then you can run the restore of the system from there. Otherwise, another option is to perform the Startup Repair.
Method 1: Troubleshooting Safe Mode
Step 1: Start the computer in safe mode
Safe mode is an option of troubleshooting for Windows that starts your computer with only basic services and features.
To get into safe mode, check out this help article: , start your computer in safe mode
Step 2: Run system restore
For complete help, see this article:System Restore: frequently asked questions
Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.
Method 2: Startup Repair
Startup Repair is a Windows Vista recovery tool analysis of missing or damaged system files that may prevent Windows from starting correctly. Run it and see if that fixes the boot problem.
Reference:
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Also take a look at this article to learn more.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Vista stuck with "update configuration".
Whenever I stop Windows Vista, System stucks with "Configuring updates" appearing on the screen.
The original post has been read.
The original post has no importance now.
What you do not understand, is that you now do a logoff and reboot for a fresh start of windows.
The problem should be gone because the download folder has been emptied.
and if the problem is still there, start the system in safe mode and then rinse the folder download again.
-
Windows 7 stuck at updates updates
My Windows updates is stuck and verification of updates. I have already used or tried the following but WITHOUT success.
1. tried "disk clean up" that did not work... unless there was something that special, I missed.
2. tried https://support.microsoft.com/en-us/gp/windows-update-issues/en-us?wa=wsignin1.0
3 https://support.microsoft.com/en-us/mats/windows_update/en
4. when I ran among the fixes above I had a return this error 'Code error 0x8024402C.
I tried this fix on youtube, but it did not work to fix the error. The error always appears, and windows update was still stuck.
https://www.YouTube.com/watch?v=rzZaRVqKHfo
Please advise, because Microsoft is not helping at all... when comes to their Windows Update.
Only KB3172605 solves the problem of update.
-
WINDOWS 8 STUCK IN UPDATES OF RETURN!
Hello
My old laptop 6mth crossed a few updates. then returned to the screen updates back.
Now the laptop is stuck in the screen back!
I have almost no technical knowledge about laptops answers please keep simple.
Thanks in advance
Garry
Maybe this thread will help:
-
Hi I just finished one of my Compaq laptop factory reset. All was going well until I downloaded the SP1 (with success), then asked me to download Windows Update agent 7.6.7600.320 (successfully). Now, the laptop is continually 'check updates' its been like this for 24 hours, can someone help and advise
Try the solution:
-
Windows 7 stuck on update "restart your computer to install important updates"
Yesterday by mistake I upgraded Windows 7 to 10. After watching 10 hours, I returned to 7. System check updates to day and put some apparently and followed with "Restart your computer to install important updates" - which cannot be updated while the system is using them. All that seems fair enough. However, the same reboot message was received after several reboots (including cold boots). Cannot restore to last good config - probably due to their loss in the upgrade. FixIt MS and solving problems of updating has not solved the problem. Is there a switch somewhere that I can reset? Help please.
Is this the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?...
-
Update to Windows 7 stuck on 'Check updates'
I've updated 31 updates yesterday because it had not been done in awhile and now it is stuck on updates. I tried some responses on this site but had no luck.
Install the latest version of the Windows Update, in KB3172605 client included.
https://support.Microsoft.com/en-us/KB/3172605
Set automatic updates to 'never check updates' and restart Windows before installing.
Best regards, VZ
-
Upgrade Windows 10 stuck updates
Upgrading Windows 10 seems to be stuck on updates. If anyone has experienced this?
Original title: upgrade Windows 10
Run the media tool to upgrade now.
If no other problems working through these steps for overcoming failures in Windows upgrade 10
-
Windows 7 stuck on the installation of the updates after the testore system
HP Paviluon g7 1322nr Notebook PC
Had to perform system restore, now Windows is stuck on installing update 3 of 177. That is for more than one hour.
In this case, run the tool in troubleshooting Windows Update from the link below and see if it works:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-TroubleshooterIf the problem persists, reset your Windows Update components by following the instructions mentioned on the link below and try to download the updates again:
https://support.Microsoft.com/en-us/KB/971058If the problem is still not resolved, run the system update readiness tool from the link below and see if it works:
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-toolHope this will help you.
-
Update of Windows 8 stuck at 12%
Update Windows 8 stuck at 12%. Frustrating because I had to deal with the error 13% already. Any ideas? Thank you!
Hi all
Update for Windows 8 (KB2771431) was released in December 2012, which the fixed an issue that was causing this update stops responding at 12% and caused also updated KB2756872 to stop responding to 13% of configuration updates.
If you hide one of these up-to-date or disabled the automatic updates to avoid this problem, you can now activate or restore your updates and search for new updates. Details on how to restore updates can be found here.
To search for new updates:
- Type Windows Update in the start screen, press or click settings, and then tap or click install optional updates.
- Press or click the link in the upper left corner that says check the updates.
-
Windows switches mode 'sleep' and is now stuck at 'update 27 of 105.
Help, please! Last night, I closed my laptop and he told me it was going to continue to install updates. 105 ofr them. I have not thought very well no problem because I was going to bed anyway. So I close the lid and go to bed when he was to be updated on 27. When I opened this morning - a full 15 hours later, it was still updating the 27. So I waited and nothing happened. It has not frozen as the blue circle turns again.
I turned off and removed the battery and then lit it back to see he's trying to return to the update of the 27. So I tried from the laptop in safe mode and now it says "update configuration" but in a lower resolution. fun. Is it possible that I can start windows and circumvent the updates?
Hi Rab_Random,
What Version\Edition of Windows you are running on your computer?
Step 1: Run system restore and startup repair, you can follow the steps mentioned in the article below
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358(See method 1 article)
Step 2: Delete the file pending.xml via the system recovery command prompt
(As in step 1) access system recovery options. You can also check out the link below
What are the System Recovery Options?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Go to the system recovery command prompt and run the following commands
ICACLS c:\windows\winsxs\pending.xml/grant administrators: F
del c:\windows\winsxs\pending.xml
Once the command is executed successfully, check if the problem is solved and let me know
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
OK, the details of installation below, so when I try to compose an email, I just get a new message window icon stuck in windows
taskbar cannot really expand and use it. If I reboot in safe mode with all the addons disabled, then it works fine. But
If I restart normally and manually disable addons/plugins, then close and restart normally IE mode unsecured, it
breaks, so doesn't seem to be an addon or plugin, but rather something with the configuration.Application Basics
Name Thunderbird
Version 31.6.0
User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
Profile folder
See file
(Local disk)
Application version identifier 20150330093429
Permit Plugins about: plugins
Build configuration about: buildconfig
Memory usage on: memory
Mail and News accounts
Outgoing server ID incoming servers
Connection security name authentication security name connection default authentication method?
Account2 (no) plain passwordCleartext of local records
account3 (nntp) news.mozilla.org:119 passwordCleartext plain stbeehive.oracle.com:465 SSL passwordCleartext set to true
account5 (imap) stbeehive.oracle.com:993 SSL stbeehive.oracle.com:465 SSL passwordCleartext true passwordCleartext
Incident reports
ID of the report
BP-0a8986d2-ff0c-41C3-9da6-e770e2141224 24/12/2014
BP-01f44ba7-3143-4452-AC98-981b62140123 23/01/2014
Extensions
Name enabled Version ID
British English Dictionary 1.19.1 false [email protected]
3.3.3 lightning {e2fda1a4-762b-4020-b5ad-a41df1933103} false
Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
Important change preferences
Value name
accessibility.typeaheadfind.flashBar 0
Browser.cache.Disk.Capacity 358400
Browser.cache.Disk.smart_size_cached_value 358400
Fake Browser.cache.Disk.smart_size.first_run
Fake Browser.cache.Disk.smart_size.use_old_max
extensions.lastAppVersion 31.6.0
fake font.internaluseonly.Changed
make. Name.monospace.El Consolas
font.name.monospace.tr Consolas
make. Name.monospace.x - baltic Consolas
make. Name.monospace.x - Central-euro Consolas
make. Name.monospace.x - cyrillic Consolas
make. Name.monospace.x - unicode Consolas
make. Name.monospace.x - West Consolas
make. Name.sans - serif.el Calibri
font.name.sans - serif.tr Calibri
make. Name.sans - serif.x - Baltic Calibri
make. Name.sans - serif.x - Central-euro Calibri
make. Name.sans - serif.x - cyrillic Calibri
make. Name.sans - serif.x - unicode Calibri
make. Name.sans - serif.x - western Calibri
make. Name.Serif.El Cambria
font.name.serif.tr Cambria
make. Name.Serif.x - baltic Cambria
make. Name.Serif.x - Central-euro Cambria
make. Name.Serif.x - cyrillic Cambria
make. Name.Serif.x - unicode Cambria
make. Name.Serif.x - West Cambria
make. Size.Fixed.El 14
font.size.fixed.tr 14
14 are. Size.Fixed.x - Baltic
make. Size.Fixed.x - Central-euro 14
14 are. Size.Fixed.x - cyrillic
make. Size.Fixed.x - unicode 14
14 are. Size.Fixed.x - West
make. Size.variable.El 17
font.size.variable.tr 17
17 do. Size.variable.x - Baltic
make. Size.variable.x - Central-euro 17
17 do. Size.variable.x - cyrillic
make. Size.variable.x - unicode 17
17 do. Size.variable.x - West
gfx.blacklist.Suggested - driver-version 257.21
mail.openMessageBehavior.version 1
true mail.winsearch.firstRunDone
mailnews. Database.global.datastore.ID 8 d 997817 CEE1-4f16-aa36-008d5baeb30
Mailnews. Fake Database.global.indexer.Enabled
true network.cookie.prefsMigrated
Network.TCP.sendbuffer 65536
places.database.lastMaintenance 1429004341
places. History.expiration.transient_current_max_pages 78789
plugin.disable_full_page_plugin_for_types application/pdf
true plugin.importedState
plugin. State.Flash 0
plugin. State.Java 0
plugin. State.np32dsw 0
plugin. State.npatgpc 0
plugin. State.npctrl 0
plugin. State.npdeployjava 0
plugin. State.npfoxitreaderplugin 0
plugin. State.npgeplugin 0
plugin. State.npgoogleupdate 0
plugin. State.npitunes 0
plugin. State.npoff 0
plugin. State.npqtplugin 0
plugin. State.nprlsecurepluginlayer 0
plugin. State.npunity3d 0
plugin. State.npwatweb 0
plugin. State.npwlpg 0
true plugins.update.notifyUser
Graphics
Adapter Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0 x 0659
RAM 512 MB card
Adapter drivers nvd3dum nvwgf2um, nvwgf2um
8.15.11.9038 driver version
14/07/2009 driver date
Active Direct2D blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
Fake license DirectWrite (6.2.9200.16571)
Gamma settings ClearType: 2200 Pixel Structure: R
WebGL Renderer blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
GPU accelerated Windows 0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
Skiing AzureCanvasBackend
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend Cairo
AzureContentBackend Cairo
JavaScript
Incremental GC 1
Accessibility
0 Active
Prevent accessibility 0
Versions of the library
Minimum version expected Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
Util NSS 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECCNoticed in the information provided:
Graphics adapt Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0 x 0659
RAM 512 MB card
Adapter drivers nvd3dum nvwgf2um, nvwgf2um
8.15.11.9038 driver version
14/07/2009 driver date
Active Direct2D blocked for your version of the graphics driver.
Try to update your driver graphics version 257.21 or newer.You can update your graphics driver and retest.
-
Stuck configuring updates step 3 0f 3 0% complete
laptop guard restart and try to put up-to-date and is stuck configuring updates stage 3 of 3 How to fix
See if this article helps you regain control of your computer:
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Windows Vista - August 2010 update
Windows Vista - August 2010 update. Stuck at 17 of 18 updates. Hard drive is occupied after 17 hours of update.
Hi JX2,.
1. you receive an error message?
2. do you have security software installed on the computer?
First restart the computer and check more later history of the update to get the update failure and post details back with details.
(a) open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
(b) in the left pane, click view update history.
(c) to view more information about an update, double-click it.
Also try to install new updates after restart the computer after the computer is clean boot state in order to avoid any interference from third-party program while installing updates.
See the Microsoft article below and try again mentioned step
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Unable to connect to iCloud music library.
I get "unable to connect to iCloud music library. It just started today 06/02/2016. It has the feel of a mistake on the side server, but there is no shift down. Everyone knows the same behavior?
-
How can I take my old favorite files and put them in my new E-mail (favorite files)
Original title: Move favorites Please help me: I had to get a new e-mail address because I could not remember my password to my old address. I got my new E - Mail address-OKAY My Question? How can I take my favorite and put files in my new E-mail (
-
Part daughter card number X 520 Dell for a PE R730
Hi all I am looking at buying a girl X 540 - AT2 10 GB Intel card. I want to keep the costs as the daughter of a R720 book cards in a R730? In my view, they are alike. If this is not the case, can someone provide me with the part number? Thank you Ni
-
Hey Gang,11 GR 2 all the bells and whistlesOK, so given a linestring is a road that I need to find a point on the linestring.I have devices that are found with a 2Dpoint and I can use the sdo_nn and the sdo_nn_distance to discover what linestring is
-
Acceso a una biblioteca fotos in equipo
Puedes crear el acceso UN repositorio fotos between 2 personas? The idea seria what pudiera access one cloud of en a mismo archivo several personas. Gracias