Windows 7 SuperFetch is not running on the computer.

Similar Questions

• Windows wireless service is not running on this computer

  I have a Gateway laptop running 32-bit Vista SP2 I can't connect to wireless networks. One day, I had no problems and the next, I am unable to find all the networks.  When I try to connect to a network, I get a message that Windows cannot find any network.  When diagnosing why link is clicked I get an error dialog box "Windows Wireless Service is not running on this computer. When the Windows network diagnostics dialogue box I click on 'Start Windows Wireless Service' and then told me that Windows cannot resolve the problem and ask contact me my network administrator or ISP.

  I tried several fixes of different forums and nothing has worked.  I ran the antivirus scans that have not found anything.  Y at - it a fix for this problem?

  Hello
   
  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Windows 7 wireless error - 'Windows wireless service is not running on this computer.

  I've recently upgraded from Windows XP to Windows 7 and have been happy using computer and connection to wireless networks. Shut down last night, and when I turned on the computer this morning, I noticed that he was not to connect to my home wireless network. Thought my network might have a problem then rebooted my router, but everything works and my other computer is connected. A Windows "diagnose" the problem and got the error message "windows wireless service is not running on this computer. Tried to fix the problem, but could not be determined. Now don't know what to do. Plugged into my router with a cable, but wireless seems quite dead. Any suggestions?

  
  

  Thank you

  TO activate the wireless service: click Start, type services.msc and press ENTER. Scroll down to 'wireless zero configuration' and right-click on it and select Properties. Set it to automatic and not Diaslbed and press the Start button, and then click OK. Who should start the service.   My "> favorite sons |" Computer tips contact | "Widget" programs (join my Folding@home team!)

• Problems with error Windows Media Player, that Windows Media Player is not installed on the computer.

  We have a computer that is running Windows 7 and (I think) Windows Media Player 12.  When I start ==> all programs ==> windows media player, the program starts and it seems to work.  It is a work computer, so no video or audio file is saved.

  We have an online seminar that the user wants to participate in, and when we click on the link to get the webinar, an error message appears saying that Windows Media Player is not installed on the computer.

  We use Firefox (version reasonably updated, but do not know which) for internet.

  I used the "fix it" tool on the website of Microsoft, but that does not solve anything.  He said it sets some configuration settings.  I thought that maybe uninstall and reinstall it can work, but I can't understand completely uninstall because it isn't in my list of programs in the control panel.

  Any suggestions?

  Thanks for any ideas you may have.

  Nolan

  (Moved to programs)

  Uninstall and reinstall could be done by searching for and opening the option "turn on or off Windows features", but I don't think it will help.

  Instead, what you need is a Windows Media Player plugin for your browser (Firefox).

  But before you spend effort on it, I would test to see if it's really the solution.  Try to join your webinar with Internet Explorer (where the WMP plugin is built).  If it works, you can be reasonably sure to know how to make it work with Firefox.

• Windows Phone 8 is not detected by the computer

  Hello

  Recently I tried to connect my phone to my computer windows, he chrges but didn't appear on the computer.ive tried to connect my ch yoke, but it will not pick up. Ive tried uninstalling the usb device controllers manager but whil im making it run on my keyboard and mouse.

  Help, please

  Original title: Usb port giving power but not showing devices

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I appreciate your efforts to resolve the issue. According to the description, I understand that you can not see your phone in windows Explorer when you connect to the USB port. This could happen have come into conflict with the existing application in your computer. I can understand the frustration when things don't work as expected.

  I would like you to provide us with more details so that we would be able to find the root cause of the problem:

  1. What is the brand and model of your computer?
  2. What is the brand and model of your phone?
  3. Were you able to see your phone under Windows Explorer before?
  4. You have recently made any changes to your computer?

  In the meantime, I suggest you try the method:

  Method 1:

  Try running Microsoft fixit to hardware devices do not work or are not detected in Windows.

  Follow the link:

  http://support.Microsoft.com/mats/hardware_device_problems

  Try to connect to another USB port as well and check if it is detected.

  You can also read our article on Windows Phone 8 is not detected by your computer

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Windows 8 closed do not turn off the computer.

  Hello

  I got windows 7 64 bit and everything worked fine, after the upgrade to windows 8, I had to update some drivers that was expected.  I remember very well not have problems during shut down my computer, I would choose Shut down and my computer would be closed and turned off as it should. Is that after a few weeks of running Windows 8 when a started problem where my computer wouldn't turn itself turned off after windows stops. I thought that maybe do a complete reset fresh windows 8 could solve the problem, but after reinstalling everything that I still have the same problem where my computer not power off. I tried disabling "quick start" to update my BIOS of motherboard.

  Anyone else have a similar problem that they were able to fix?

  I SOLVED MY PROBLEM!

  It turns out that there is a CMOS bug with my motherboard.  What I did to solve this problem is I have reset the settings in my BIOS AND I cleared the CMOS to its default (see the manual of the motherboard manufacturer for instructions on how to reset the CMOS settings), for mine, I used a jumper.

  Now, my computer stops correctly and goes off as it is supposed to.

• His Windows logon (7) does not play when the computer starts with the automatic logon.

  If I understand my Internet search, that this is a classic problem with Win7 and Vista I had my sound connection at startup of the computer each time. It comes, of course, with the sound of starting Windows (i.e. before opening of session) disabled.

  When I log out and then log in again once I get acoustic logging, so the question is about the AutoConnect at startup.

  I would really like to know if there is any small hack or trick that I could use to allow me to get a sound at startup to logon without having to connect.

  NB. There is no security issue on automatic logon, because it is a home computer and I live alone.

  Thank you very much
  Philip Goddard.

  I'm having the same problem, I think I'll call dell and see what they say, I integrated 5.1 audio so I guess that there is no sound card. I'll post my results

• Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

  Hi guys,.

  I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

  I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

  CPU: AMD Phenom II X 4 955

  RAM: 16GB DDR3 Corsair

  GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

  My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

  Troubleshooting I executed before writing these lines:

  • Updated my nVidia drivers
  • Checked the themes and DWM Session Manager services, both started, both the Auto value
  • Ran the store built, the problem cannot be resolved
  • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

  So the GPU is not the problem, I've been running Aero until this problem has occurred.

  Any ideas?

  Thank you!

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

  You can follow the link to your question:

  The customers TechNet Lync and devices Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

• Windows search engine is not running

  I installed "Uniblue Powersuite" on Windows XP and after that it worked I have found that my Windows search engine does not run in Outlook Express.

  When I open "Search for" drop-down list under file shows that all files are grey except output.

  Suite of assistance has not solved the problem.

  I installed "Uniblue Powersuite" on Windows XP and after that it worked I have found that my Windows search engine does not run in Outlook Express.

  When I open "Search for" drop-down list under file shows that all files are grey except output.

  Suite of assistance has not solved the problem.

  Uninstall Uniblue Powersuite.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.  Remove everything it finds.

  Reset.

  This may not fix the result, but it will eliminate what has probably caused (as well as the riders who came with her.)

• Windows Vista update (April 1, 2011) now the computer will not boot.

  1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

  Hi Ema1976,

  Do you have an error message when you try to start?

  Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

   

• Genuine Windows 7 on MacBook Pro running in the partition, BootCamp with VMware Fusion 3.1

  I'm having a problem with Windows 7 Ultimate 32 bit.

  I installed Windows 7 on my Bootcamp partition and until recently he worked well as well when I ran into VMWare Fusion.

  When I boot on my Windows 7 on Bootcamp partition, everything is OK.  But then when I run it in VMWare Fusion it says that my copy is not genuine.

  I just went through the automated phone system and entered the codes, and so now while I'm running Fusion Windows is genuine.

  I fear, however, that when I return to the execution of the partition, Bootcamp, Windows will say that is not true, once again.

  Only, I have a copy of Windows 7 and can only run from the VMWare Fusion or Bootcamp partition at any time.

  How can I fix it if Windows is more said that it is not authentic, when I switch from a training camp and VMWare Fusion?

  I need to be able to run Windows while I'm on the side of Mac at the same time

  Any help would be greatly appreciated.

  If you used the same Windows Installer Bootcamp, VMWare Fusion product key, there is the question.  You can only install and activate a 1 license of Windows 7.  The second installation requires own license that you can buy on the Microsoft Store. Carey Frisch

• I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshoppowers upward but then gets off by Win

  Question? I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?

  What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator

• Adobe Bridge is not running in the background

  I have installation of bridge to load and run in the background when I start windows.  However, it does not run in background but lance and run as normal.the icon does not load in the control panel like other programs that load and run in the background. Running a windows 7 64 bit computer

  Omke,

  I wanted to say that @ GrumpyOldOne comments about the Br CC behavior after selecting Start the connection option has been as expected designed behavior.

  «Bridge starts to connect, but not running in the background.» It happens on the desktop as if I double click the icon in the start menu"

  Kind regards

  Ashutosh

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!