Windows 7 to stream: stream K4F53UA 7 boot more

A friend gave me this tablet, because he wasn't using it.  I have it wiped and created a recovery drive and ensured that I could go to the recovery.  I have upgraded to Windows 10 and he has finally found the Atom chipset drivers for accelerated video.  I disabled the Secure Boot to test an installation of Ubuntu, but I couldn't get beyond the message of blue and white ncurses-esque indicating that he was not able to load.  I held and set aside.

A week later I'm trying to boot into Windows, and he turns the doughnut and then turns off.  She performs an iteration between auto repair and the normal startup. Diagnostics tests all pass.  Reports are fully charged battery.

I tried to start my recovery disc and it stops with your PC ran a mistake and needs to restart.  The next time he tells the PC needs to be repaired.  This is starting to sound like the recovery disk created from the HP Windows 8.1 installation not really create a usabe recovery drive.

I repeated the process and this time the recovery USB reset and play in the doughnut until running dry battery.

I tried to reflash the firmware twice, reset to default values, compensation keys, load HP keys and allowing the secure boot but no combination seems to be good.

Thanks for the reply!  I forgot to mention that I tried the reflash procedure twice, just to be on the safe side.

Power + up + down everything that held down = Reflash firmware (not sure where he stores a backup copy)

Food + low = interruption boot sequence and prompt for the essential operations of the function

Power + top doesn't = no apparent action

Alimentation power supply for two seconds, then hold immediately high + low while leaving the power = mode DnX

After which allows him to sit with the battery and then plug again, and allowing it to charge seems to have solved the abnormal state.

Warned about what splash screen to load until it reaches 5%.  He let sit for an hour, then Windows started successfully.

I didn't know that the CMOS reset report as follow another, but at least it is no longer fails at startup.  I will also add that, even if Windows could not start, I managed to get Ubuntu has started, but it would never reach X 11 initialization before locking up or turn off like Windows.

Tags: HP Tablets

Similar Questions

  • How can I exclude specific folders of the indexing of Windows Media Player stream?

    Windows Media Player 12 has removed the possibility of excluding some files being indexed.  This feature was available in Windows Media Player 11.  I need to be able to exclude some records indexed because I have collections of photos that are too big for the WMP player to manage.

    Excluding these folders in the library WMP is not an option because MediaCenter uses the settings of the library to determine where to find pictures (even if it does not use the library to view photos or videos - just the WMP settings) so if they are not included in the library WMP, I can't see them in MediaCenter, but if they are in the WMP library he freezes everything for 30 minutes whenever I turn on an Extender that forces a re-analysis of the WMP library.

    I tried to edit wmpfolders.wmdb to exclude certain files, but the changes that I last only for a few hours to a day or two.

    any ideas?

    Thank you
    Dan

    Hi Khaled, thank you very much for your answer.  My question was related to the media library in Windows Media Player, but your response was to Windows 7 libraries.  Unfortunately, your answer does not apply to my question.

    What I need to be able to do, is to exclude a folder from indexing of Windows Media Player streams although it is included in the list of folders to the index.  It's because the Media Center uses the settings of the library Windows Media Player to determine where to find pictures.  However, it does not use the Windows Media Library to view the photos.  It is, therefore, no need to have Windows Media Player, indexing of thousands of photos when Media Center does not even use the library to display.

    The problem is that when I let Windows Media Player scan my pics, it causes all to slow down for 30 minutes or more each time I light a MediaCenter extender because it is re-scanner all my photos.  However, if I let Windows Media Player not scan my photos, so they are not visible in the MediaCenter.  There is a catch 22.

  • Cannot install Windows 7 error "partition must contain one or more dynamic volume...". ».

    I have windows 7 installed on my pc.

    When I updated my system driver in Device Manager, he demanded to restart.

    When I restart my pc, it does not restart "windows error recovery".

    I tried every possible means to recover my pc, but all fails.

    Finally, I tried to reinstall windows 7

    but, when all the files have been expanded

    After that, he says "windows cannot update Installing boot configuration could not proceed.

    but I am able to start mu computer through safe mode.

    company-hp

    model No. - p6-2020ix

    pls hel me out.

    Original title: partition contains one or more dynamic volumes

    Hello

    Rather than create new threads for each answer, I suggest you post your reply in the main thread. This helps help you the better.

    For your reference, the original thread is:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/partition-contain-one-or-more-dynamic-volumes/c3027f83-5f02-4dd2-802b-2e3d4314edc6

    (1) what is the complete or exact error message?

    (2) what is the serial number and the model of the hard disk on which you try to install the Windows 7 operating system?

    Note: Dynamic disk function is not supported for editions of Windows 7 Home Premium, Windows 7 Starter and Windows 7 Home Basic.

    (3) what is the edition of Windows7 installed in the computer?

    Try the methods suggested in the article below and check after each method:

    You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2:

    http://support.Microsoft.com/kb/927520

    Warning for the disk check: when running chkdsk (Check Disk) disk hard, if bad sectors are found on the hard drive and then chkdsk attempts to repair this sector. And if no data is available on this sector can be lost.

    Warning in the BIOS: Basic Input Output system (BIOS) to change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    It will be useful.

  • Lenovo T60p boot more

    Greetings,

    Well, now that I've fixed the fan problem, I'm afraid I have created a.

    My T60p was originally a disk with two partitions on it. A 90 GB main partition and a secondary partition of 5 GB. Since I had to re - install the operating system, the 5 GB partition is no longer in use.

    I tried Hirens user like Fdisk utility to see if I could use the space. I tried formatting the space with a NTFS file system. This is what I did. Since then, the machine does boot more.

    However, using Hirens utility, and instead to start with Hirens disc, I chose to boot from the hard drive using NTFS. The machine starts very well so all my information is there.

    How to start without the disk Hirens now? It is no longer me gives access to programs that were on the disc...

    Kind regards

    Jean-Pierre

    P.S. I'm trying to fix myself, as for all issues on my laptop, before considering to Geek Squad. Thank you

    for your entry.

    Here are the specifications of the machine.

    ThinkPad T60p

    2007 8EU

    Note of the moderator; s/n, edited for the protection of its own

    Clonezilla might or might not get you where you want, but no harm will come to try it...

    Good luck.

  • I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

    I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

    original title: why isn't my laptop recognize the eathernet link?

    Go to your computer manufacturer's support web site
    and search for the Windows XP drivers for your specific computer or motherboard model number.

    If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
    Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
    then the SATA, Audio, USB, LAN, etc, drivers.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • When I use Windows Defender or secruity of microsoft databases or more all secruity, I get an error message. 0 x 8007005

    When I use Windows Defender or secruity of microsoft databases or more all secruity, I get an error message. try using microsoft s e., I get an error message 0 x 8007005. Please help.just get into computers.

    Is the computer clean? Had it installed before MS Security Essentials antivirus program? Which one? You uninstall it before installing MSE?

    Make sure that the computer is clean:
    http://www.elephantboycomputers.com/page2.html#Removing_Malware MS - MVP - Elephant Boy computers - don't panic!

  • Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

    Hi, Mksethompson,

    What is your model of computer?

    Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

    http://support.Microsoft.com/kb/968279

    Dell issue

    http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

  • age of empires III ERROR 1603 consult windows install help (msi.chm) or MSDM for more information

    I tried to install age of empire III on my computer windows 7, but I got an error until I had to even insert the key (ERROR 1603 consult windows help install (msi.chm) or MSDM for more information). I tried to enter in the files and run the setup.exe as an administrator, but it did not help.

    Anyone know why this happens and how to fix it?

    AoE3 is fully compatible with Win7 and I had no problem at the facility, but it may not be compatible with

    your graphics accelerator if it's an older 'integrated' graphics chip.

    (This should show a different kind of error message, but sometimes Windows spits a seemingly unrelated error message.)

    Try to post on AOE3 forums below. There may be someone who has had the problem with the installation of the game-

    Age of Empires III heaven Forum

    Age of Empires Forums - Forums

    This thread is related to Vista, but you can find something useful-

    Installation of Age of Empires III on a Vista based computer - Microsoft Answers

    .

  • When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing. Where can I go to change the margin?

    When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing.  Where can I go to change the left margin on Windows Live Mail?

    Print settings are in Internet Explorer, the file (ALT + F keyboard), Page Setup

    Increase the left? the margin of

  • Flow 8: Need help for upgrade of windows 10 8 Stream

    I'm trying to upgrade my 8.1 Stream 8 Win to win 10 to aid Assistive technology update from MicroSoft on this page

    https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(14c348e893a91089cb2980533c6ee1...) ()

    I started by updating Win8.1 completely so that there is nothing on the Tablet and then downloaded the Upgrade Wizard of Windows 10. When I started running he says he he had enough memory, but it stopped at 95% and said: he is there not enough of free space. I let him try freeing up a space, but he could not find anything.

    I found a few threads on the forum about this, but they all were too complicated for me or a different installer that had buttons that is not in question.

    I'm not experienced with this sort of thing, so I need very simple instructions. Can someone help me with this?

    BTW: I have empty drives USB 8 GB and 4 GB and a notebook NC6400 with Win10 that I can use during this operation, if that helps.

    The second line in your original post mentions 64 bit where my concern. Yes you correctly found that the stream 8 has a 32-bit version of Windows and and x 64 compatible processor. Due to the needs of additional memory to a 64 bit OS, I don't think even to try to install a 64-bit version of (even if it were possible). If Windows 8.1 32 bit is upgraded by using the normal upgrade process then yes it'll upgrade automatically to 32 correct but the version of Windows 10 Home. Multimedia authoring tool will allow you to choose which version you download however (as the machine that allows you to download the Windows version may not be the device that you want to upgrade) that is why it is important that you get the 32-bit version only.

    If the instructions you found on the upgrade via a USB stick with Windows good, 10 build are difficult for you to understand so yes, I suggest you use the line of Support technique Microsoft and get some "hold your hand" during the process. As to how you connect the USB to the Tablet I'm not sure what you mean by an adapter "regularly." If it has good caps at each end to connect your USB to the Tablet, then it should work. I used a 4 port powered USB 2.0 Hub when I did my upgrade etc because it allows me to keep the Tablet powered / load all by allowing multiple devices to plug - do not just the memory stick, but also a combination of mouse and a USB keyboard. I posted the details of the cheap and simple hub I bought for this purpose elsewhere on this forum. HTH

  • Accessibility for windows users photo stream

    I sent and invite a friend to join a photo stream, but it is under Windows. Is there a way for her to access the photo stream?

    Yes - directions are here - My Photo Stream FAQ - Apple Support

    But you send an invitation to MyPhotoStream - you send invitations to shared using iCloud albums, sharing photos - these instructions are here - iCloud Photo Sharing FAQ - Apple Support

    We cannot see you so it is important that yo clearly identify what yo are using and what you want to do

    LN

  • Stream 13: Installation of Windows 10 own stream HP 13

    Hi forum there.

    I own a hp 13 stream provided with windows 8

    I was prompted to install windows 10 but it wasn't for lack of space. now that we can install windows 10 and use only the cd key without upgrading I tried who

    Since the hp never came with a sticker indicating the windows cd key, I used a tool to extract from the bios. Unfortunately, if I use this cd key windows 10 refuses to activate.

    is there a known workaround solution?

    I found the solution

    I leave 10 to automatically install the latest update of windows, and the operating system automatically reads the BIOS cd key and activated!

    This can be marked as resolved and is used for future references, I guess!

    Thank you very much for your information and support

  • Stream HP X 360: touchscreen does not work after updating windows on HP Stream 10 x 360

    Hello

    I have a problem with my HP Jet x 360 after doing the update of windows 10. Seems that there are no drivers for touch screen in windows 10 again, even a generic driver.

    I checked the Device Manager and found 6 Uknown devices with no driver.

    I installed the HP support Assistant, but found no driver. Windows Update No.

    Under Human Interface devices group I can't see the touch screen and in the settings app is also absent.

    I also checked the diagnostic tool in the BIOS, but the touch screen works very well.

    Please help me!

    Thanks four your help.

    You can correct the touchsreen windows version 8.1 of 'Serial IO driver without connected sleep Support Intel'. As someone discovered in this treat: http://h30434.www3.hp.com/t5/Notebook-Hardware/touch-screen-on-stream-11-x360-not-working-after-windows-10/td-p/5188892

    You can find the driver here under pilot-Graphis-Intel: http://support.hp.com/us-en/drivers/selfservice/HP-Stream-x360-Convertible-PC/7439377/model/7579371#Z7_3054ICK0KGTE30AQO5O3KA30R1

    However this does rest not correct the prolbem completely! The Touschreen works but not the accelorometer. I hope HP suport can provide some real suport at some point and release drivers that make accelometer works in windows 10.

  • Windows 7 Media streaming running does not on

    When I try to transform wmplayer streaming media or the Control Panel, it is said that it is not enabled because it depends on a service failed to start

    Hi SLiu,

     
    Try to restart the service manually and check the result. To do this, try the following steps.
    a. Click Start, type services.msc and press to enter.
    b. in the list of services, double-click on "Windows Media Player Network Sharing Service."
    c. change the startup type to automatic.
    d. click on the Start button. Click the Dependencies tab and check if there is no dependency service. If so, then restart them as well.
    e. click ok to apply the changes.
    f. try to turn on media sharing.
     
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Toshiba LX830 incompatible with Windows 10 - only streaming not possible

    I have "upgraded" to Windows 10 8.1 recently and have lost the ability to send mp3 and mp4, files stored on the computer for my smart TV.

    All attempts to cause an error on the PC and smart TV.

    Microsoft say it is because Toshiba do not have widows 10 drivers compatible for the series of LX830 even if it is only 2.5 years old and came with already installed 8.1.

    A check on the Web from Toshiba site shows that the LX830 does not appear on lists of machines planned for windows version 10 compatible drivers.

    Does anyone know if additional releases of drivers will follow beyond those available to date?

    The site Web of Toshiba said simply that if your model is not on the list, it is not compatible with windows 10 - which is a bit hard for a relatively new machine.

    As far as I know that pilots Win 10 won't come out for units that are not part of the list.
    But how did you send your mp3 / mp4 files on your smart TV?
    What link did you use?

Maybe you are looking for