Windows 7 Ultimate 64 bit freezes on startup after the last update.

I think I have updated a major problem with the latest update from microsoft.

I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

I gave up, I formatted the hard drive last night and just reinstalled.
Microsoft Windows 7 Ultimate 64 bit,
NVidia graphics driver
Microsoft Security Essentials,
Microsoft Office 2007 Ultimate,
Apple's iTunes and Quicktime.

The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

My processor is an Intel Pentium D
I have 4 GB of RAM.

There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

Tags: Windows

Similar Questions

  • Icons, windows and adobe acrobat toolbars are very large after the last update

    Im having a problem with the last update of acrobat pro, toolbar, windows, and icons is very big after the last update. how re its size?

    https://www.dropbox.com/sh/pbd33n1q2wirpq3/AABHjSRXo-crpYGVLaOrB2FVa

    Please check the doc: Hi DPI, support Retina display. Acrobat, Reader

  • After the last update, new tabs show a boittiaux search, left the window 'related searches', announces low & Bing becomes default in the search bar.

    After the last update:
    (1) open the new tab - rather than thumbnails of frequently visited sites, I now get a Bing search page.
    (2) all new pages now arrive at a window on the left side of the "Related Searches" and an ad that runs along the bottom.
    (3) this has been fixed but could be due - after the upgrade, my area of research has been failing to Bing (I do not use or as Bing). When I reset, it is again changed to Bing. I removed Bing entirely and he returned. I removed it again and so far it does not appear by default upward again, but he's back to the list of search engine after removing two times.

    Thanks cor - el. I so reset Firefox and then to about: config and updated the keyword.url of Google search string. Seems to have finally worked - let's see it.

    An another massive Microsoft f & * % up - those who do not or use Bing are more anti-Bing than ever.

  • After the last update of FF13, I double click on the bookmark button and the window does not open, so I can edit.

    When I double click the bookmark (star) button a window still down so I can change the bookmark or place it in the folder I want. Now, after the last update of FF13 (June 2012), I can click once and the page is a bookmark in the "home" folder, but when I double click nothing happens. (1) I restarted FF, did not help 2) I rebooted the computer, did not help.

    You just click on the star once if the star is high already turned on to indicate that a site is bookmarked. Normally, you would click once to bookmark the current site, then click once, if you want to change the new bookmark. If you double-click and you open and close the pop-up edition.

    After you enable hardware acceleration can cause problem with edit op - up doesn't work does not correctly, so in case of problems, you can disable hardware acceleration.

  • After the last updates of windows have problems with start up and now drivers

    Hello

    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  • After the last update of windows, I now shadows behide the fonts & photos

    After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

    Hello

    What is your Windows operating system?

    Right click on my computer

    Select Properties

    Select advanced system settings

    Running, click on the settings button

    Uncheck show shadows under menus

    Disable shadows decline of use for the desktop icon labels

    Click on apply, Ok

    Click OK

  • Monitor flashes after the last update of Windows

    I use a newer computer that already had Windows 7 pre-installed.  After the last update my monitor started flashing.  It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur.  He also doesn't seem to be a problem with the refresh rate.

    I ended up coming back to a restore point from before the update.  The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355.  Someone knows that could have caused the problem, and if so do I really need?

    All updates have been classified as '' Important '' that's why I didn't question them.

    However, it seems that my monitor was kaput.  It happened to be a coincidence that he begins to not just after a Windows update.

    I thank everyone good help.  I'll keep updating in mind suggestions, in case something strange happens in the future.

  • Illustrator 2015... Black window after the last update

    After the last update "Illustrator 2015" shows the window that contains the still open tables. This has also no open tables. Much more practice and efficae was the scene of previous versions.

    It ' a new bug or a bad choice of adobe to have this window that limits the display on the desktop even without any Illustrator open table?

    Or is it a way to harmonize systems mac os windows?

    "Framework application' is in the main menu bar in"View. " It is not a preference.

    Please read the manual on how to cinfigure workspace.

    https://helpx.Adobe.com/Illustrator/using/workspace-basics.html

    Illustrator help | Characteristics of the Illustrator workspace

    New:

    New analytical features to Illustrator

  • Windows 7 ultimate 32 bit freezing

    I install window 7 Ultimate 32 bit, and last night I got a problem, my Pc suddenly freeze in the middle of my work, after that when I restart manually, asked me to start window normally or repair. First I start normally and it took about 45 minutes to start, but after that every thing like was going slowly, as if I'm trying to run any software he responds after 69 seconds, usually, it takes 2 seconds and when I am trying to see any movie or trying to browse my other hard drive storage drivers it freeze and not ANSWER DO NOT so I left my computer idle it come to normal again, but even if do the same thing happens overtime. Please help me and please don't tell me to format and re install Windows 7 again.

    Here are my PC details
    Intel original 945
    Core 2 Duo
    2 GB Ram + 1 GB ram = 3 GB Ram (Zeon)
    500 GB hard drive of 160 GB = 660 GB (seagate)
    Nvidea 520 2 GB graphics card
    It out put: 230 VCA 50 60 Hz
    Please Sir, mam help me I am in trouble and almost sat idle until the screen because if I click PC shows me is unresponsive

    Hi Bubun10,

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message?

    3. do this problem occurs everything working on all programs?

    I would suggest trying the following methods and check if it helps.

    Start in safe mode then put the computer in a clean boot state and check if there are any third-party program is causing the problem.

    Step 1: Start in SafeMode in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Method 2:

    Try the steps in the Microsoft support article and check if it works.

    Optimize Windows 7 for better performance:

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Hope the information is useful.

  • WiFi connection issue after the last update of Windows

    After that the last Window XP updated, I faced a problem connecting wifi internet.

    I (and others I know) get the question when trying to connect to the wifi. One of my friends has windows 7 and had the same problem. Personally, I have two laptops (Thinkpad T43 and T60), the T43 has only been affected. I did a lot of tests (tests of ipconfig, ping, etc.) and found what could be the problem.

    I found that I was not able to conect to my router. I changed my wifi to no (no wep or wpa key) security configuration. At that time, I was able to connect to the internet. I changed my wireless security to WEP key with special characters again and wasn't able to reach my router connection. However, when I changed my WEP key of only alphanumeric characters that has worked. With the WPA key, I am not able to connect to my wifi.

    My laptop is an old but a friend to me as a new brand.

    I have the feeling that there could be a conflict with some brands of wireless cards. I have an Intel Pro 2200BG in the T43 a different in the T60. In my tests, I used the same configurations as my other laptop which doesn't have any problem. I used the same radio channel and values. I would like to get the thoughts of an expert to properly solve the problem

    Thank you

    Problem fixed

    With 2 other people with the same problem (one called me an hour ago!) after the last window xp SP3 update and glancing again Ipconfig. I found that the tcp/ip seem to have been corrupted by the update. Then, I applied the following command at the command prompt: netsh int ip reset resetlog.txt , and then restart the computer.

    This time, the command ipconfig showed information that makes sense! And three laptops with windows XP pro SP3 were able to successfully connect to any Protocol (wpa, wpa2, wep).

    I conclude this post by saying that, probably one of the last update of security for windows XP corrupted the TCP/IP Protocol and we had to reset correctly to solve the problem.

  • Windows Vista, Windows Defender will stop during the complete analysis with error 0x800106ba code after the last update 08/10/2014 Definition (1.185.2582.0)

    I have windows vista home Basic. after update in full scan at end of scan it stops with error 0x800106ba something caused scan to stop, but if you do a quick scan, it works fine, is there a solution to this problem, since I've never had this problem before and I tried the suggestions of others on the forum, but without success , or maybe a new update to fix this. I am using Webroot Secure Anyhhere Antivirus program all this time. An other update of definition 1.185.2784.0 was made on 10/10/2014, but does not

    correct the error. Please need help to repair

    Jose

    After this last update for windows defender 1.185.3248.0 definition as of 14/10/2014, my full crawls of windows defender now working

    Thanks for help

  • Windows 7 Ultimate 64 bit - freezes when playing

    Core i7 920 CPU
    8 GB Ram
    ASUS GTX285 graphics Card

    I had Vista Business 64 bit on for 9 months large runnning
    I play Call of Duty 4 and 5 - which, with Vista, went very well with all the settings of high
    I installed Windows 7 ult 64 bit without material change and then play COD 4 or 5 he began to randomly freeze the system and the only thing I could do was shut down the system by holding the power button in.
    Sometimes the game would go for fine 2 hours that other times she would freeze after about 20 min of (sometimes as fast as 5 minutes in the game)
    I tried to adjust the graphics in the game in low heat
    replaced HARD drive of (good excuse to get some old replaced HARD disk)
    I set up a dual monitor on the computer and run hardware monitor to check the time that the game was running - everything seemed fine, but every now and then as it froze it would give me a blue screen with the following error:

    A clock to interrupt not received on a secondary processor in the allotted time interval.

    0 x 00000101 00000000000000 x 0 x 0 000000000000000019 0xfffff88002f63180 0 x 0000000000000002

    what I did in the end is reinstalled Vista on a second partition so I could dualboot and reinstalled the games.

    so under the same hardware with the same software installed Vista 64 bit is fine and Windows 7 64 bit freezes randomly when you play

    I regularly update the two BONES and my bios is also updated - latest drivers for the graphics card installed

    everyone had the same problems and know of any way to solve this problem?

    Morley71,
    In addition to update your video card driver, you must make sure that all hardware components have installed drivers Windows 7.  Check for audio, NIC, chipset, etc...  and make sure they are all drivers of version of Windows 7.  Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 Ultimate 32 bit does not start after updates

    Hello

    I recently installed Windows 7 ultimate on a PC under Vista Basic.  I have done this as a clean install, wipe the existing partitions and create a new one for the installation.

    Everything was going well for two days until this morning when I turned on the P.C. I get the screen of the bios of the system and can see my SATA drive in the Bios and the size is properly reported. However, after the bios when the computer tries to start Windows, I get a blank screen and the hard drive remains slight activity at all times.

    I took the drive into the pc and put it in another pc via an external hard drive box and I can see the data and files in the disk.

    I put the disc in the original and booted PC from my DVD of windows 7 I tried to run the bootrec tool but the tool said that he had no windows partition!

    Now I had to reinstall Windows 7 from scratch even once - I do not have a hardware or software yesterday and I shut down the system properly (the Office was left connected to a UPS because it is at work, so no power problem on shutdown).

    The only thing I can think of happens out of the ordinary yesterday was a load of Windows, updates requiring a reboot in the morning, but the machine was fine after that.  I have actually a lot on the machine yesterday like I did has been implemented of a laptop for a demo of systems almost all day.

    Everyone has met nothing like yesterday? Or have any idea of what past?  I don't want to have to rebuild my PC whenever there are updates!

    I had a similar problem yesterday with 12 October 2010 MS update on a laptop running Win 7 Professional. PC worked perfectly in the morning, I downloaded the update to 32 MB and the installation process seems to be okay, but I couldn't get past the Windows 7 login screen after booting. Kept, get a blank screen. Even tried to start safe mode, but got the same answer. Later, I used the F8 key at startup and selected the last restore point that was created a week ago. It helped me in my PC. I removed the automatic download more MS Updates. One of the 12 had about 10 patches in it and really messed up my PC. Good luck. /

  • Problem after the last update for Windows 7 (11.11.2015): flashing in normal mode login screen

    I am running windows 7 on my laptop last night, that he day and when it's over he did not start the screen flashes and does not start I tried to do a restore of the system without any look can someone help thanks

    Original title: update

    Hi David,

    Thanks for posting your query in Microsoft Community.

    a. you have any Windows 7 installation media?

    b. What is the update's KB number?

    [To see which articles updates failed, try the following steps:]
    a. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
    [ b. in the left pane, click view update history.]

    If the update number is KB3097877, then reinstall the update KB should solve the problem. However, as you can not reach your office, I would first run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

    Method 1

    When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

    Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    If you are using Windows 7 then the link provided below might help you to download and create installation media.

    Download Windows 7 Disk Images (ISO files)

    Method 2

    If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

    1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
    2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
    3. Click repair your computer.
    4. Click the operating system you want to repair, and then click Next.
    5. In the System Recovery Options dialog box, click command prompt.
    6. Type Bootrec.exe, and then press ENTER.

    See the following link for more information:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    If you are able to reach the office, and then try to Uninstall then reinstall the KB3097877 update and check if it helps resolve the issue permanently.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Mice are not appearing after the last update of Windows 8

    After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

    Deactivation and reactivation of the mouse
    Uninstall the drivers and search for updates
    Try different mouse (2 USB, 1 green connector)
    Using the troubleshooting in the Device Manager tool, a fine of the question
    Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
    Thanks for the reply of Kevin,

    In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

    In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

    I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

Maybe you are looking for