Windows 7 Ultimate 64 bit - freezes when playing

Core i7 920 CPU
8 GB Ram
ASUS GTX285 graphics Card

I had Vista Business 64 bit on for 9 months large runnning
I play Call of Duty 4 and 5 - which, with Vista, went very well with all the settings of high
I installed Windows 7 ult 64 bit without material change and then play COD 4 or 5 he began to randomly freeze the system and the only thing I could do was shut down the system by holding the power button in.
Sometimes the game would go for fine 2 hours that other times she would freeze after about 20 min of (sometimes as fast as 5 minutes in the game)
I tried to adjust the graphics in the game in low heat
replaced HARD drive of (good excuse to get some old replaced HARD disk)
I set up a dual monitor on the computer and run hardware monitor to check the time that the game was running - everything seemed fine, but every now and then as it froze it would give me a blue screen with the following error:

A clock to interrupt not received on a secondary processor in the allotted time interval.

0 x 00000101 00000000000000 x 0 x 0 000000000000000019 0xfffff88002f63180 0 x 0000000000000002

what I did in the end is reinstalled Vista on a second partition so I could dualboot and reinstalled the games.

so under the same hardware with the same software installed Vista 64 bit is fine and Windows 7 64 bit freezes randomly when you play

I regularly update the two BONES and my bios is also updated - latest drivers for the graphics card installed

everyone had the same problems and know of any way to solve this problem?

Morley71,
In addition to update your video card driver, you must make sure that all hardware components have installed drivers Windows 7.  Check for audio, NIC, chipset, etc...  and make sure they are all drivers of version of Windows 7.  Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Windows 7 Ultimate 64 bit freezes on startup after the last update.

    I think I have updated a major problem with the latest update from microsoft.

    I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

    That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

    This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

    I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

    I gave up, I formatted the hard drive last night and just reinstalled.
    Microsoft Windows 7 Ultimate 64 bit,
    NVidia graphics driver
    Microsoft Security Essentials,
    Microsoft Office 2007 Ultimate,
    Apple's iTunes and Quicktime.

    The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

    My processor is an Intel Pentium D
    I have 4 GB of RAM.

    There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

    Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

  • Windows 7 ultimate 32 bit freezing

    I install window 7 Ultimate 32 bit, and last night I got a problem, my Pc suddenly freeze in the middle of my work, after that when I restart manually, asked me to start window normally or repair. First I start normally and it took about 45 minutes to start, but after that every thing like was going slowly, as if I'm trying to run any software he responds after 69 seconds, usually, it takes 2 seconds and when I am trying to see any movie or trying to browse my other hard drive storage drivers it freeze and not ANSWER DO NOT so I left my computer idle it come to normal again, but even if do the same thing happens overtime. Please help me and please don't tell me to format and re install Windows 7 again.

    Here are my PC details
    Intel original 945
    Core 2 Duo
    2 GB Ram + 1 GB ram = 3 GB Ram (Zeon)
    500 GB hard drive of 160 GB = 660 GB (seagate)
    Nvidea 520 2 GB graphics card
    It out put: 230 VCA 50 60 Hz
    Please Sir, mam help me I am in trouble and almost sat idle until the screen because if I click PC shows me is unresponsive

    Hi Bubun10,

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message?

    3. do this problem occurs everything working on all programs?

    I would suggest trying the following methods and check if it helps.

    Start in safe mode then put the computer in a clean boot state and check if there are any third-party program is causing the problem.

    Step 1: Start in SafeMode in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Method 2:

    Try the steps in the Microsoft support article and check if it works.

    Optimize Windows 7 for better performance:

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

    Hope the information is useful.

  • Pavilion a6403w windows 7 ultimate 32 bit freezes during restart

    Hello my pavilion a6403w intel dual 2160 cpu 1.80 ghz 1.80 ghz 4 GB ram with 32 bit windows7ultimate

    grip ot stop after reboot happens to the blue screen with the thing of 4 color box middle... only thing I find that I can do is stopped with the Tower of power system back button on it goes to the screen to use safe or normal mode in normal mode most of the time taking care of her sometimes half to stop the computer 4-5 or more times until is starts normally... incidentally my Windows 7 was freash install no upgrade system came with vista... Help, please

    Thanks for reading James

    UPDATE: I tried the tests all came back ok... the only criterion that I could not do was cmd

    sfc/scannow system says that I should be adminastrtor witch I am to be only one user on the computer...

    After you run other computer tests took 4 times off the Windows Load button finally properly

    any other ideas?

    Hi big dave! Thank you very much for your help... This is more than a problem due to I went to a non-windows operating system

    witch is much more stable in my opion

  • G7 2233 pilots missing after windows 7 ultimate 64-bit new installation

    Hi - I received the computer modeled above with 8 pre-installed windows. I installed a clean install (wiped readers) and installed the operating system Windows 7 Ultimate 64-bit. When I did, none of the internet connections would even work. I since found (somehow) a pilot who was consistent, which deals with the missing wifi adapter, but I still need the following items:

    Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_184B103C & REV_05

    PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01

    UNKNOWN DEVICE: ACPI\HPQ004

    I can't find these anywhere, PLEASE help.

    When you request support, please provide the HP model name and/or product the full number of the computer in question.

    Assuming that you have a HP Pavilion laptop g7-2233 cl, specifications, other than the CPU, the RAM and the size of the screen, seem to be the same as my sister-brother g6-2210us laptop HP Pavilion computer. Drivers 64-bit of Windows 8 listed for two computers are the same. I installed Windows 7 64 bit on his computer about a month ago and used the following drivers of multiple origins;

    Drivers for Chipset AMD (Chipset, USB 3.0, SATA/RAID)

    AMD Catalyst Display Driver

    Realtek FE family LAN Driver 

    HP sp54972 Atheros 5xxx/9xxx WLAN Driver

    HP IDT HD Audio Driver sp59620

    HP sp58539 touchpad driver Synaptics PS2

    HP CoolSense sp60051

    and from Windows Update "HP Mobile Data Protection Sensor.

    It is possible that the WLAN chipset on your machine is different and may require different drivers.

    I've also updated updated the Synaptics driver to v16.2.21 on Synaptics site. Some of the factors above may require the HP sp59202 software framework. In addition, the WebCam requires the package of "VideoCM" of the "SWsetup" folder in the original installation of Windows 8 and CyberLink YouCam sp59986.

    When you are finished, there is no unknown device on its system.

    Please send Bravo

  • Arabic Language Pack for Windows Vista Ultimate 32-bit

    Dear Sir/Madam

    There was a 'Arabic Language Pack' available on Windows Update for Windows Vista Ultimate 32 bit, but when I installed SP2 for 'Vista Ultimate' is now gone from the Windows Update Page, so where can I get it now?

    Thanks in advance
    Yours sincerely,
    Elsharif

    Assumed as replied, without other added messages

  • Error 1935 when installing Microsoft Visual C++ 2008 x 86 in Windows 7 Ultimate 32 bit

    Dear people, I have a problem. I have a Samsung NC10 Netbook with 1 GB of RAM, dual core processor clocked at 1.6 Ghz, Windows 7 Ultimate 32 bit and graphics Mobile Intel Express 945 Chipset family 251 MB. When I try to install Microsoft Visual C++ 2008 x 86 (for my Blackberry Desktop Software) I still get this error, regardless of how many times I try.

    ---------------------------
    The Microsoft Visual C++ 2008 redistributable installation program
    ---------------------------
    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version = "9.0.30729.1", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "x 86", type ="win32" '. " See Help and Support for more information. HRESULT: 0X8007041D.

    Help and Support gives me nothing. Help, please! I think that without Visual C++ 2008 my Blackberry Desktop Software does not work. Please help me, I'm in a big crisis. Thanks a zillion.

    (Moved to programs)

    Hi Aditya,

    You might face this problem because of the Windows update Setup or any third party application. I suggest you follow the steps and the tool provided in the link below.

    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version

    http://support.Microsoft.com/kb/970652

    Note: Please refer to the warning of the link section.

    You can also see the steps in the link given below.

    https://social.technet.Microsoft.com/forums/Windows/en-us/80c0eba9-ea1a-455D-baf1-0bb2c7c4b408/Error-1935-Microsoft-Visual-c-2008-Redistributable-Install?Forum=w7itproinstall

    Let us know the status of the issue.

  • NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

    I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

    I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

    A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

    I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

    Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

    ------------------
    Information System
    ------------------
    Time of this report: 07 25, 2012, 19:06:02
    Computer name: RAIDER
    Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
    Language: English (regional setting: English)
    Manufacturer: Gigabyte Technology Co., Ltd..
    System model: P67A-UD3-B3
    BIOS: Award BIOS v6.00PG Modular
    Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
    Memory: RAM 8192MB
    Available OS memory: 8176MB RAM
    Page file: 2861MB used, 13487 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    DPI setting: Using System DPI
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    ------------
    DxDiag Notes
    ------------
    Display 1 tab: No problems found.
    Sound tab 1: No problems found.
    2 Audio tab: No problems found.
    Input tab: no problems found.

    -------------
    Sound Devices
    -------------
    Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: Yes
    Default voice playback: no
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    ---------------------
    Sound Capture devices
    ---------------------
    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.
    Driver name: USBAUDIO.sys
    Driver version: 6.01.7601.17514 (English)
    Driver attributes: Final retail
    Date and size: 2010-11-21 13:23:47, 109696 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: No.
    Default voice Capture: Yes
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Hello

    In Services, verify that the Windows Audio service is running and set to automatic.

    a. Click Start and type Services and press ENTER.

    (b) ensure that these services are defined accordingly.

    c. right-click the service, and then click Properties.

    According to the DXDiag, there is no default sound capture selected.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes

    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

    Capture audio by default: No.

    Default voice Capture: Yes

  • I get the error 0xC004E003 code when I try to activate Windows 7 Ultimate 64-bit. Someone knows how to solve?

    I get an error 0xC004E003 code when I try to activate windows 7 ultimate 64 bit, someone knows how to fix?, have read and tried everything what others had said to others who have the same problem and nothing

    You buy a genuine Windows 7 license. The copy of Windows 7 Ultimate, you have installed is an OEM SLP license that should only be preloaded with a new PC. You seem to have installed a copy of Windows 7 Ultimate that uses an activation exploit that bypasses the product activation.

    We know that it is because the BIOS date:

    20080909000000.000000 + 000

    Windows 7 was released in 2009, the date of your BIOS says 2008, which means probably that your system is provided with Windows Vista or Windows XP.

    In addition, he is a well known Windows 7 Ultimate license which has been used all over the web:
    Windows product key: *-* - YG69F - 9M66D-PMJBM

    Do a search on the web.

    Thus, you must either charge your version of Windows that came on your computer (Vista or XP) or consider purchasing a license of Windows 7 genuine.

    Windows 7 - version comparisons:
    http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

    MS Windows 7 store price:
    http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  • Why am I being asked to be "Administrator" when I am the only user and administrator in the Panel, so it will install my programs in Windows 7 Ultimate 64-bit?

    I've updated for Windows 7 Ultimate 64-bit.  Now, I'm trying to install my programs (again!) he continually says: «the installation program has sufficient privileges to access this directory...»  This installation cannot continue.  Log in as Adminisitrator. »
    I am the administrator.  There is no one else.  Control Panel says I have administrator privileges. How can I get around this to install my programs will install?

    Have you tried to do a right click on the file and selecting "run as Administrator"?

  • Satellite A200 (PSAE6) crashes on Windows Vista Ultimate 32-bit

    Hello

    I recently had a few frequent freezes on Windows Vista Ultimate 32-bit Edition, I think it's maybe the video card (ATI HD2600 mobility). I have already downloaded and installed the latest drivers from the Toshiba site, but it continues to, sometimes, when I'm playing games, the screen blinks for 5 seconds or more and then would become black, completely erased, but the background sound and everything still works well and I am able to shut down the PC by pressing the power button once and then restart it normally.

    It's a minor problem, the major problem is the freezing point, it freezes completely without warning, but oddly enough, he freeze by practicing a game! But freezes on normal operations (internet, office, etc.). I did the tests, tests of HARD drive memory, all in good health, and worse, on the Windows Event Viewer could not detect any problem, simply says 'unexpected system shutdown.

    I'd appreciate help please.

    Thank you

    Hi I do not know if this will help, but you've got service pack 1 installed on your laptop, as when I installed it on my desktop the first time it caused blue screen errors and gave me a lot of problems, including the error messages that seemed to come with applications, I opened and a boring IQRL driver equal or less than but could not work why and then ultimately , I had so many problems that I had to completely reformat my office and I removed my scanner XP and webcam (both had vista drivers) and when I reinstalled service pack 1, it was beautiful, if by any chance do you have anything attached to your XP laptop and vista drivers as these seemed to be what was causing my errors.

    Also a question about your graphic card drivers, I have the same laptop as you and was looking for updates to the graphics driver and couldn't find them anywhere on the site, where did you find yours? I use Vista Home Premium 32 bit, my model number is A200-28 p (PSAE6) and I would like to know if there is a new graphics card driver but can not find on the basis of knowledge, so the fact you have updated your would be could you point a new user in the right direction :-)

    Thank you

    Simreaper

  • 15 - ab098na: Pavilionm 15 Windows 7 Ultimate 64 bit drivers Ethernet required

    Hello

    I need the Ethernet drivers for my Pavilion Notebook running Windows 7 Ultimate 64 Bit OS.

    When I go to Device Manager I get the IDS of equipment as follows:

    PCI\VEN_10EC & DEV_8136 & SUBSYS_80B8103C & REV_07

    PCI\VEN_10EC & DEV_8136 & SUBSYS_80B8103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    Everything works fine, but no sign of the NIC, and I really need this to work. Please don't propose that I return to Windows 8 or 10 will never happen as long as I have breath in my body.

    Thank you

    Excellent - all sorted, thank you very much

  • Clean install of Windows 7 Ultimate 64 - bit on Qosmio X 870

    When I got my laptop (Qosmio x 870) I immediately uninstalled BONES because it was full of bloatware and installed a clean version of windows 7 ultimate 64-bit. After my installation I tried installing the drivers on my laptop, but some do not seem to work.

    My VGA driver installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original O.S inflated). However, the biggest problem I encountered is the network driver. I installed all network drivers unique on the page of the Toshiba driver for the qosmio x 870, but none seems not to work. For some reason, the laptop thinks my wifi is disabled, I know that it is not (unless there is a setting in the bios that needs to be changed if not I don't know).

    I really need some help here guys, if someone can me EXACT by the drivers I need this point would mean the world to me. Toshiba really should have a package of essential drivers, as most other computer companies have, it makes everything much easier for people who hate the bloated OS that comes with their laptop.

    > When I got my laptop (Qosmio x 870) I uninstalled immediately his BONES because it was full of > bloatware and installed a clean version of windows 7 ultimate 64-bit.
    In my opinion this is the biggest mistake that anyone can do after the purchase of brand new computer. But you're not alone.
    As a first step before doing this you create recovery discs, and I really hope that you ve done that.
    Second, I can understand you if you say that the recovery image contains many pre-installed tips that you don t like, but you should not install version of the OS. No one force you to use all this stuff. You can remove all the system software and configure OS preinstalled on the way you like it.

    And third, why you didn t post here and picked up some opinions until you started to install own OS? You might get some useful tips first.
    You can install the version of the own BONE but installation of additional things must / should be made after the right installation order. Computers laptops Qosmio have more complicated platform/hardware features and drivers, tools and utilities must be installed on the right track if you want to have all the features.

    Best thing you can do now is to reinstall the OS and continue to install all the extra stuff following the installation order posted by Lasko.

  • HP 630: Full disc format and a clean install of Windows 7 Ultimate 64 bit.

    I'm already slot than Windows 7 Ultimate 64 bit OS in my system HP 630 (2 GB RAM, 320 GB HDD).

    I want to do a full format of the drive around & pure install a fresh copy of Windows 7 Ultimate 64 bit OS. When I restart the system with the CD in the ROM already, it does not show an option to boot the system from the CD (boot from CD). I changed the order of boot devices in BIOS & upgrade CD as first option, still it does not show me the option to boot from the CD. Please suggest me how to proceed with a full format of the drive.

    Thanks in advance.

    Hello

    Try the following.

    Remove the disc to install Windows 7 and laptop stop,

    TAP the ESC key as soon as you start the launch of the portable computer and then Start Menu, insert the Windows 7 installation disc.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

    Kind regards

    DP - K

  • Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

    Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

    @JCL9

    Here you go...

    Your Web site Support Page printer - and full functionality Softaware for Windows 7:

    All-in-one printer, HP Photosmart C6280 range

    Help, information and examples:

    Install the full features software - printer

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

Maybe you are looking for