Windows 7 Ultimate backup service does not work

Similar Questions

• my windows base filtering engine service does not work according to norton

  just sub renewed norton 360 v6 displays an error saying my base filtering engine service window does not work

  Hello marshallfullenwider,

  Look at the post below to see if that will help your question.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/06144d3a-9AB0-4e09-a522-f085bc8c17fb

  If this isn't the case, answer just to come back and let us know.

  Thank you

  Marilyn

• Windows Vista Ultimate Media Center does not work

  Hello world

  When I open media center units it stops down in a few seconds indicating "...". has encountered a problem and must close. ». This happens every time. I am running Vista Ultimate SP2, latest drivers etc. I ran sfc/scannow as suggested in another post and also a reconstruction of the MC data store also proposed; with the same result.

  The only journal entry for MC's: MCUpdate ends at 2009-05-29 17:47:16

  Please can someone help, I upgraded to ultimate business so I have a MC, and he never worked :(!

  Thank you very much
  Wayne

  I SOLVED THE PROBLEM - it was some DivX Codecs that have been installed. I uninstalled all DivX and now it works YAY!

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• HP 2000-2d29DX Notebook PC: intel rst service does not work

  Recently, I noticed the icon in the lower right of the screen showling the intel rst service does not work. In the past, I saw the icon, but it would correct themselves after a few minutes. A week ago I downloaded the Speedy PC Pro registry cleaner. Don't know weather or not to download that has something to do with the service of the RST. Help, please.

  Hi @aick,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 2000 and the Intel Rapid Storage Technology Service is not running. Click the windows services key type.

  Verify your Intel Rapid Storage Technology Service is not on the manual and the service has been started. The service should be automatic and started. Once these settings are correct, restart the laptop.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.
  
  Thank you.

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• printing problem "the print spooler service does not work.

  Original title: printing problem

  I want to print, but a warning said "the print spooler service does not work.  What is c? or what can I do?

  Hello

  I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows