Windows 7 Ultimate compatible driver for Philips SAA7130HL Multimedia Capture Device?

Where to find the compatible driver Windows 7 Ultimate for Philips SAA7130HL Multimedia Capture Device?

Hello

 

Method 01:

I would say go to devices and just by clicking on the Device Manager and updated driver for the device and check if you can get the drivers.

Open the http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager Device Manager

If you have the drivers CD, you can try to install the drivers and see if it works well or not, can also try compatibility mode.

Make older programs in this version of Windows

http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

 

Method 02:

I suggest you to check the Windows Update to see if a driver is downloaded and installed automatically.

Automatically get recommended drivers and updates for your hardware

http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

I suggest you contact Philips for support with this device:

http://www.support.Philips.com/support/contact/contact_page.jsp?userLanguage=en&userCountry=us

Tags: Windows

Similar Questions

  • H have a computer that runs windows vista Ive had on the line using Xp professional, but it seems that I can't find a compatible driver for the audio card suggestions?

    I have a computer running windows vista that Ive had on the line running on the line with professional Xp but it seems that I can't find a compatible driver for the audio device. Ant suggestions? The Pc has a legacy, it's a Compaq laptop

    Hi morningstar410,
     
    -What is the brand and model of your laptop? Specify the same thing to help us find the right audio driver for you.
    -For which version of the operating system you are looking for the driver?
     
    Visit the following link and check if you download the drivers here:
     

    In the meantime, follow the three steps solution given in the link below and see if this helps you.

    No sound in Windows

     
    Keep me updated on the status of the issue.
  • SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

    I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

    SD memory card

    Device type: hard drives

    Manufacturer: generic

    Location: SDA Standard compatible SD Host Controller

    Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    Driver provider: Microsoft

    Driver date: 2006-06-21

    Driver version: 6.1.7601.17514

    Digital signer: Microsoft Windows

    Driver details

    C:\Windows\System32\drivers\partmgr.sys

    C:\Windows\System32\DRIVERS\sffdisk.sys

    C:\Windows\System32\DRIVERS\sffp_sd.sys

    File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

    If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

    If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

  • COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    Running Server 2003, Web Edition SP2 Build 3790.

    The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

    Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

    Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

     

    Diana

    Microsoft Answers Support Engineer

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • Re: Card C-media - Windows cannot load the driver for this hardware device. (Code 39)

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.

    I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have.  The long, everything went well, except for the audio part.

    Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)  Click Troubleshoot to start the troubleshooter for this device.

    I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there!   When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.

    BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD.  Thanks for any help on this, jim

    Hello

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/310123

    I also suggest you to install the drivers from the Dell site.

    http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.
  • Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Original title: Add/Remove components error and DVD driver error

    Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

    Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

    I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

    Hello
     
     
    Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123
     
     
    Method 1.
    Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems
     
     
    Method 2.
    Also, try the methods listed in the section below and check.
    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • HL-dt-st dvdram gsa-t20n ata device. Windows cannot load the driver for this hardware device. Windows Vista.

    my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.

    Hello

    1. were there any (hardware or software) changes to the computer?

    Run the FixIt and check if the problem is solved or not.

    Your CD or DVD drive cannot read or write media (Fixit)

    Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

    Hope that helps.

  • SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

    Original title: CD/DVD drives do not work after upgrade from XP to Vista

    I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

    Hi krt2,

    In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

    You can try to uninstall and reinstall the driver for the device to solve this problem.

    Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

    a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    d. restart your computer.

    Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, read the following article and check if that helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    (KEYBOARD ERROR)

    Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

    Hello

    I don't know how it happened.

    I tried unistalling the software but have the same problem when connected to e

    Help, please

    Hi Davedirect,

    ·        It's a wired keyboard or a wireless keyboard?

    ·        Who is the manufacturer of keyboard?

    ·        Since when are you facing this problem?

    ·        You did changes to the computer before this problem started?

    ·        Have you tried to restart the computer and check if the keyboard works normally?

    However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

    Step 1

    Remove the drivers from the computer. To remove the drivers to follow the steps below:

    a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

    b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

    Step 2

    During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

    a. Click Start.

    b. access control panel > system > hardware > Device Manager.

    c. open Device Manager and expand the keyboard device.

    d. right-click on the device keyboard and uninstall the device.

    During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

    Step 3

    Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Access the link below to learn more about the error code 38:

    http://support.Microsoft.com/kb/310123

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows cannot find a driver for HP LaserJet 1022 on the network. To locate one manually, click on OK.

    Computer (win xp 32-bit) A located 1020 printer with sharing

    Computer B (win 7 64bits) successful connect through A computer printer share

    Computer C (win 7 64 bit)

    Computer D (win 7 64 bit)

    D C & computer appeared this message: -.

    Windows cannot find a driver for HP LaserJet 1022 on the network. To locate one manually, click on OK.

    When I click OK, I get an error message:

    Required file: INF for HP LaserJet 1022 printer driver
    The file '. INF' (unknown) is needed.
    Type the path where the file is located, and then click OK.

    On the Win 7 computer...

    Devices and printers
    Add a printer
    Add a local printer
    Select create a new port:
    Select Local Port for the port Type:
    Enter the name of the network to the XP computer that is. \\XPcomputername\LJprinterid
    Install the LaserJet 1020 driver when prompted

  • HP Pavilion a6109n Vista 32 - bit, windows cannot load the driver for ATAPI DVD A DH16A1L CD-ROM

    HP Pavilion a6109n Vista 32 bit
    Windows cannot load the driver for ATAPI DVD A DH16A1LCdRom

    Hello

    Try the Microsoft fix it Center.   You receive this error code?

  • HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

    I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

    Hello:

    Please see if it works.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

    Paul

  • I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for