Windows 7 - "USB device not recognized" - to load the new electronic Cigarette device. Help, please?

Similar Questions

• CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>

• USB ports not recognizing keyboard and the mouse after sleep

  I have a wireless Logitech and mouse keyboard. These connect to my PC (Vista32) wirelessly via a USB plug small heel I plug into a USB port. Logitech called "Unify" which, according to them, is standard to connect devices through a USB port. My mouse and keyboard work fine when I restart my computer, but when he goes to sleep and I me re - wake up there that they do not have. I force power off of my computer because I can't access my account.

  I have ensured that the selective suspend setting in settings usb in advance power settings is disabled. Support Logitech seem unable to help him.

  Hey Sinclair,

  You can refer to this link suggestions and answer us with the State of the question.

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://support.Microsoft.com/kb/928631

  Also refer to this link: How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume

  http://support.Microsoft.com/kb/953367

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps.

• Problem copying from inside to the external usb HDD, error 0 x 80070057 the parameter is incorrect. Help please

  I am trying to copy a file from my hard drive internal sata to USB external hard drive when I get the error code: error 0 x 80070057 the parameter is incorrect.

  Windows 7 Ultimate. SP1, all updates applied until 01/06/2013. It is the first time for many years that I was puzzled. Help

  Hey, thanks for the back. But I found that Windows has nothing to do with the problem. Recently I had upgraded to Acronis 2013 and used it to make several copies of my C drive for a total rebuild.

  I decided to move these files to my drive to free up space on my internal hard drive, external usb drive. That's when the trouble started. The four files, I moved only gave problems.

  Still scratching my head on this subject. Auto car, supposed to Acronis TIH2013 must be at fault. So I uninstalled with REVO Uninstaller ATIH2013, to a maximum depth of scan. Then downloaded and installed a new copy of the ATIH2013, made a new image to replace the one which gave the trouble.

  Problem solved!

  The first download of Acronis must have had a bug in the download, the second seems to be clean and working properly.

  Anyway, thanks for the help. I'll keep it in mind in case I ever encounter this problem again.

• XP Pro cannot see my Garmin GPS, not able to load the new software

  When I plug the device via the port USB port unit starts, and that's all. Cannot see it in my computer, or the files of the menu drop down.

  Hello

  1. were you able to use this device without any problem before?
  2 did you recent hardware or software changes to your computer before this problem?

  Try to update software for Garmin device.

  Reference: http://www.garmin.com/garmin/cms/site/us/support/

  See also the articles that might help you.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway
  http://support.Microsoft.com/kb/952607
  GPS and your Windows XP laptop
  http://www.Microsoft.com/windowsxp/using/mobility/expert/ballew_03may27.mspx

• Not enough space on the data store.  Newb help please.

  I have a running ESXi 4.1.0 2 Windows VMs server.  Everything worked very well, but I had to turn off all of the server and physically move.  When I powered it back, only on virtual machines with the power on at the same time.  The other dies with the error above.  I have very little experience with VMware and I'd appreciate any help.  Thank you.

  Welcome to the community - the reason why you can't turn on your VM is because a vmkernel swap file is created when you turn on the virtual machine, and if there is not enough space, then, you will receive this error - you'll need clean the directories where are installed the virtual machines - you'll need to remove all of the log files If there are snapshots commit those and then you should be able to powere on virtual machines

• iDVD will not open due to the required debugging atos. Help please I need to produce DVDs with direct access to scenes and have only used iDVD for the years

  I use iDVD to produce videos of my marriage. Latest updates of operating system, the program requires an administrator password to enable atos to continue debugging, and upon entry, iDVD just stops. Is there a way to get around this?

  Hey there WAPhoto,

  I understand that you experience a problem when you try to open iDVD on your computer. I would suggest a troubleshooting step for you that can solve this problem. Please, go to your library folder by using the information in this link:

  In the Finder, click the menu go to the menu bar, and then choose one of the following:

  Library: Hold down the Option key, and then choose library.

  OS X El Capitan: go directly to a specific folder

  https://support.Apple.com/kb/PH22187

  From there, navigate to your Preferences folder. In this folder, find the plist labeled "com.apple.iDVD.plist" and move it to this folder on the desktop.

  Out of this folder and go to the Caches folder. In this folder, find the folder named com.apple.iDVD and move the file named 'Cache.db' in this folder on the desktop as well.

  At this point, you can close the Finder window and relaunch iDVD. If iDVD opens without a problem, you can move the files that you moved to the desktop to the trash and continue to use iDVD as you wish.

  Thank you for coming to Apple Support communities!

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPhone 4 usb connection not recognized on Windows fully updated 8.1 update

  Installation program:

  Toshiba laptop Satellite C55A, with authentic Windows 8.1, fully updated.

  With the latest version of Itunes installed, my Iphone 4 is not recognized by using the USB cable.

  In Device Manager:

  The Apple Mobile Device (Recovery Mode) is present, but with a yellow marking seems to indicate a problem

  Worse still, there are two entries in the Device Manager the Apple Mobile Device (Recovery Mode)!

  Try to update the drivers, failed.

  Found this usbaapl64.inf usbaapl64.sys lack.

  Downloaded these files; tried to update again, the same problem saying the drivers for this device are not installed (code 28 )

  I have installed and reinstalled Itunes several times to no vail.

  My iphone 4 is useless now! Whose to blame Microsoft or Apple?

  Paul

  Hi Paul,.

  Thanks for the reply with the status of the issue.

  It seems to be a problem with iTunes not with Windows. I suggest you try reinstalling iTunes and check if it helps. If the problem still persists, then try to install iTunes in Windows 7 compatibility mode and check if it works for you.

  Refer to the procedure described in article Microsoft Help that I provided in my previous reply to install iTunes in compatibility mode.

  Just reply to the State of the question so that we can help solve you the problem.

• Ports USB Host not recognized ESX4i of devices

  I have a new HP dl 360 G6, I installed the ESX4i update1 custom hypervisor HP with the latest patches of ´s, HW USB ports are activated by the server BIOS and I create a new machine virtual Windows Server 2008 x 32 with allows USB ports, USB ports are shown by windows 2008, but when I plug a peripheral USB is not recognized I need to plug a USB 72 GB DAT, I tried also with a USB and no job. All USB devices are 2.0.

  Yes, you can redirect USB via VMDirectPath, but you will lose VMotion, HA, instant = backup. I had to recoomend a look at USB over IP as Digi AnywhereUSB

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows media player is not recognizing my mp3 creative zem m300 player

  Windows media player is not recognizing my zen m300 mp3 player creative I have two of these one with each firmware version. I uninstalled and reinstalled computer driver recognizes the drive as a separate disk drive will play even files but will not recognize the device if I can sync the music. clearly, it's a matter of media player I can see im not the first to have the problem and nobody has really found a solution. is it possible to go back to an older version of media player to make it work.

  To clarify, the device presents itself as a removable drive in the start menu > Compute, correct?
  If so, can you get the files back that way?

  Were you able to sync previously?

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.