Windows 7-Vista 32 bit SP2 Build 6002 Windows Updates stopped at update. Usedboth fix - sound and now all the updates are missing.

Similar Questions

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 12.3.2.35 on Windows 7 upgrade broke my 5th gen iPod and iTunes all the

  Upgrade to 12.3.2.35 on Windows 7. It worked for about 10 minutes before everything started continuous crashing and apparently broke my iPod classic 5th gen. Now, no version of iTunes will work on my computer and my iPod think there nothing about this (while the investigation of my computer still shows 30 GB in use), and will not even try to sync. Help please!

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I'm looking for my Windows product key? The sticker on the system is worn out and some of the figures are missing.

  If the deleted keys from Windows XP Professional license, can he get help on your part _ Microsoft?

  I mean if someone had bought Windows XP Professional SP2 and ran it on his PC. After a long period of time if he wants to format his PC, perhaps because of the virus, and he realizes that some numbers on his license key are missing, can he get help from you? If so, how can he be helped please?
  Hello
   
  I suggest you to contact Microsoft hotline.
   http://support.Microsoft.com/kb/295539

   

• Just installed update for Windows Media Player 11 and now, all the songs I had in my library before the update, I get the message you need a license to play these songs.

  These songs have been copied to my computer from the CD that I bought at retail, and have played several times.  Is there a process where they can be reinstated? I don't know if it's the right word, but I hate having to download individual licenses for these songs. And why doesn't IE throw me on the internet as soon as the download license screen happens?  Do I have to uninstall the update?

  Hello

  1. What is the exact error message you get?
  2. what version of Internet Explorer you are using?
  3. do you have an error message when Internet Explorer throws you off the screen?
  4. you remember the update that caused the problem to occur?

  Follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/kb/935336

  Note: Not applicable also for Windows Media Player 11.

  See also: http://support.microsoft.com/ph/7763

• New computer Windows 7 keeps waking my Brother printer, do not own, all the settings are correct on the printer?

  My new Acer computer with Windows 7 continues to wake up my Brother MFC J625DW printer, has done that with my old XP unit, does not not a clean place and all the printer settings are correct and identical forward can help them a whole?

  Hello

  I have a Brother printer and for now, it is not the same installer and it lights up occasionally. I think so
  This cleaning the inkjet.

  Mine is an all-in-one Brother MFC-J825DW.

  Maybe there is a setting in the Setup/properties of the printer driver be awakened.

  The answer will come from brother.

  Rob - SpiritX

• I changed servers from Comcast of Qwest and now all the games that came with my Windows XP have disappeared. How to recover?

  I'm trying to find my games came with my computer, mainly solataire. When I changed the servers disappeared somehow. I want to find them. My Games folder on the accessories link says it is empty.

  Hello

  You can add games by following the steps mentioned below:
  1. with the CD Windows XP in the CD drive, click Start, and then click Control Panel.
  2. double-click on add or remove programs.
  3. click on Add/Remove Windows components.
  4. in the Windows Components Wizard, click Accessories and utilities (the words, not the box), and then click details.
  Use the appropriate method.
  5. If the Games check box is not checked (no games are installed), and you want to install all of the games, click to select the Games check box
  Click OK, and then click Next.

  Refer to this article for help:
  
  How to add or remove games in Windows XP:
  http://support.Microsoft.com/kb/307768

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• signed for windows live to combine a comcast email account and now my e-mails are removed from the comcast account

  Why don't windows live emails deleted in other accounts?

  Hello

  Given that the problem is related to Windows live, I suggest you post the question in the forums and check them off below if it helps:
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  It will be useful.

• Desktop of Windows XP only shows background. All the icons are missing.

  After a recent update, all my icons disappeared from the office.  The background is still there but nothing else.  I tried the thing right click, but it does nothing.  No start, no nothing just the wallpaper.

  Press Ctrl-Shift-Escape to open Task Manager, and then choose file > new task and typeexplorer.exe to restart the process of office.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Majority of the graphics are missing from the HTML version: HR 10 [10.0.1.292] under Windows 7 Professional, SP1

  Hello world

  I am really frustrated right now and am ready to throw HR by the window. I use HR 10 [10.0.1.292] under Windows 7 Professional with SP1 and 16 GB of RAM. There has been no major changes to my computer other than standards fixes/updates to date which are systematically pushed down for us to work. I have not installed new software.

  I worked on the same project file for the last 6-9 months and more. I have not changed directories. I have not changed the file names. I have not changed computers. My construction of the 25 September 2015 (which was our most recent product version) looked and worked perfectly.

  However, on January 8, 2016, I updated the date of our copyright made one or two other typo corrections made and then build a new one. Apparently, that's when everything goes haywire. MOST (but, curiously, not ALL) graphics in my chm file had been replaced by the symbol ' broken / lack of graphic link. Here's a sample:

  

  The really weird thing is that every graph, without exception, displayed correctly in its section related when I open the subject to change, as well as in Preview Mode! Yet when I create my project and display the final result, the graphics disappeared. And this isn't a case where all the images are missing or visible in any given topic - some graphics within any given topic are there while others are missing.

  But wait - it gets even MORE bizarre. IF I:

  • Open each topic in my project;
  • Double-click on each graph to open the dialog box Image ;
  • Click OK to close the dialog box Image (he did NO CHANGE see you ;))
  • Save the subject;
  • Close the topic;
  • Once that all the subjects have been "updated" then generate my primary Layout, all THE IMAGES ARE like MAGIC!

  I've done this TWICE. But the minute I close my project, go home for the day, open my project Sunrise the next day, make some changes more and then generate my main layout, I'm back to square one and most of my images were once more POOF! I simply cannot continue touching each chart every day! My project includes 535 topics and about 850 graphics - many are reused across so touching each of them is really out of the question.
  

  
  

  I did several searches trying to find just a small idea of what is happening. I'm really at the end of my mind - I hope someone has an idea how to solve this problem - as I said, I'm ready to scream!

  
  

  Nancy

  Nancy, have you tried to demolish your CPD file?

  If you don't know how to do this, click on the link below and a video it will guide you through the process.

  Click here to see

  See you soon... Rick

• I changed the permissions of folder to % ProgramFiles%\WindowsApps, now all the startscreen apps do not work, I need to reinstall windows?

  I changed the permissions of folder to % ProgramFiles%\WindowsApps, now all the startscreen apps do not work, I need to reinstall windows?

  I managed to fix it by adding 'All the Packages of Application' to the list of permissions

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Flash Player 11.9.900.117 not recognized by Opera and Firefox on Windows Vista (32-bit) SP2

  I use 4 browsers on my laptop Toshiba Windows Vista (32-bit) SP2:

  Internet Explorer 9

  Google Chrome Version 30.0.1599.101 m

  Opera Version 17.0.1241.45

  Mozilla Firefox Version 24.0

  I just downloaded and installed Flash Player 11.9.900.117, which is recognized by IE9 and Chrome from Google, but not in Opera and Firefox, even after closing the browser and re-start.

  How can I get Flash Player to work with Opera and Firefox?

  Thanks for your help.

  See you soon,.

  Joel
  

  There are two different versions of Flash Player for Windows (3 If you count Chrome)

  ActiveX which is ONLY for IE,

  Flash Player for other browsers which is for Opera, Safari and Firefox, and

  "PepperFlash" that is built into Chrome by Google.

  Download the tool or another browser version will have NO EFFECT on Chrome.

  Download of the ActiveX version WILL NOT install a plugin for Opera or Firefox because they do not use controls ActiveX - NO browser but IE uses not since about 2001.

  Download Adobe Flash Player for Firefox and Opera setup directly by clicking on the following link.

  Flash Player plug-in (all other browsers)

• KB981793 update Vista 64 - bit SP2 error 8024200d

  Windows Vista 64 - bit SP2. Update cannot be installed with 8024200d error code. ALEKS

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Try manually downloading and installation: http://www.microsoft.com/downloads/details.aspx?FamilyId=41988289-8fa9-4d3d-a959-d3e64ccc6071&displaylang=en

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  then try wu

  TaurArian [MVP] 2005-2011 - Update Services

• Error code 80070490 Vista 32 bit /SP2/

  For month auto update tried to install Vista 32 bit SP2.  I read all the options in the solutions of Ms.  That is to say. stand-a-lone, by ensuring that the intell. the service is auto/default.  Nothing helps.  I have a printer HP PSC 1350 all in one I would use but cannot without this update.  Can anyone help? Please?

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft