Windows 7 will not recognize my iPad

Similar Questions

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• Windows xp will not recognize or list the wireless connection.

  Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be

  Under networkconnections the old wireless router, or the other is visible.   I tried toads new link also with no success

  Hello

  1. What is the brand and model of the computer?

  2. who is the provider of Internet (ISP) Service?

   

  Follow these methods.

  Method 1: How to fix wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

   

  Method 2: To create a wireless network, you can follow these steps.

  a. click Start, click run, type ncpa.cpland click OK.

  b. in the window network connections, right click on the wireless network connection icon and then click Properties.

  c. in the wireless network connection properties, click the wireless networks tab. If you do not see a wireless networks tab, your network card can not take over the automatic Wireless Configuration service.

  d. under preferred networks, click the Add button.

  e. in the network name (SSID) box, type the name of the access point, and select the parameters according to your network requirements. This setting will match the configuration of your router or access point. If you have a router or wireless access point, and then select Wireless Ad - hoc mode and use the same network name that matches other computers.

  f. click OK

  g. under available networks, click View wireless networks.

  h. in the wireless network connection dialog box, choose a network by clicking on its name and then click on connect.

  Reference: set up a wireless network

   

   

  For more information, see this article:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• Windows 8 will not recognize my second monitor

  After the upgrade to Windows 8, the computer does not recognize my second monitor. Disconnect and reconnect the device after it remains unknown. I am running a Dell Inspiron all in one office. Do I need to install a driver so that he will recognize the secondary monitor? If so, which?

  Access

  Control Panel\All Control Panel Items\Display\Screen resolution

  and make sure that both monitors are indicated and "Extend desktop to this display" is selected for each monitor.

  If both monitors are not displayed, try clicking on "Detect".

  ==================

  Check Device Manager to see if the card video cards (if you use more than one) and both screens are indicated in the list of devices.

  Tom Ferguson

  Later:

  Try to go to the Dell website, enter your service number (usually located on a label on the back of the case) or the installation allows to detect the pattern.

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn & ~ ck = mn

  See if there are files on your computer for Windows 8.

  ==================

  Another option is to use a USB to VGA or USB key to video DVI 'card', according to which will accommodate the Dell) has no Windows 8 pilots. For example. I use a unit of IOGear (USB to DVI). After starting Windows 8 Pro, it was detected and drivers automatically downloaded and installed for it.

  TF

• Windows 8 will not recognize my product key!

  I have had up to Windows7 for windows 8, Microsoft sent an email me my product key, but I want to do a clean reinstall. When I enter my product key reinstall windows do not recognize.
  When I ranked up 7 to 8, I kept all my old settings, but this causes all sorts of problems so reinstall it.

  any help please, I tried Microsoft on the phone but I do not understand what he says! both for technical help from Microsoft! (USLESS)

  Ken

  Make sure that you enter the characters.

  Do not enter hyphens (hyphen) who will be registered automatically.

  Do not press the SPACEBAR when you enter the product key.

  Make sure that you do not enter the wrong characters.

• There is a section of 3 inches from the window which will not recognize the mouse. It will not let you click on the icons or the screen somehow in this section under the address bar. It is only in firefox when it comes to a problem

  There is a section of 3-inch window that do not respond or recognize the mouse. It not let you click on the icons or the screen somehow. It is the only program that we are facing this problem with.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Windows Xp will not recognize my powershot SX130 IS

  Tried everthing, all USB ports, works OK on another computor, checked with canon, they have been of any help whenever I try and down load, I get a message "does not recognize the camera.

  Hi donaldPaul,

  1 have you made changes to your computer recently?

  2. I suggest you follow the methods given and check if it helps.

  3. your camera is detected in Device Manager?

  You can also try the steps in the below mentioned links.

  A digital camera is not recognized in Windows Vista or Windows XP

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Windows XP does not a digital camera Canon PowerShot S100 (Applicable for Powershot SX130 IS also)

  I hope this helps.

• Windows 7 will not recognize or sync Pocket PC which is connected via usb

  Hello

  I am trying to sync my Pocket PC data (Pal my ASUS a686) on my computer (Windows 7 Enterprise). I think that if you had Windows XP, we would use Active Sync. However, it's windows 7, so I think that I use Windows Mobile Device Center. In fact, I used the center of the device before, but it has been a week to try to download the data again and it no longer works. He is very picky. But we need our data and cannot wait for the day that he decided to download.
  So I uninstalled the center of the device (the tip of a chat room) and now I can not re - load it. However, before I even uninstalled, the problem returning to the top, it was my computer does not recognize the device connected via usb.
  Code 43 continues to come does not recognize this device. And yet it is plugged. I keep trying to restart, plug the unit in different orders, send good energy, etc.
  I did a soft reboot of the pocket pc the last time, but that makes you lose all data on the pocket pc and we cannot lose this data. Finally, it is for the eco-counter software. When it worked, I hit the sync button and the data were downloaded. Now... He says just connect me please my pocket pc when it is connected. Why!
  Thank you
  Cole

  On the Pocket PC, try going to "start |" Settings | Connections | USB to PC"and unchecking the checkbox"Enable advanced network functionality. "

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks -www.badnewsbluesband.com

• Windows 7 will not recognize canon zr65 firewire

  My computer laptop win7 HP does not recognize my Canon zr65 camcorder.  I can't find Windows 7 drivers for the zr65.  My zr65 screen shows "DV IN" when I connect the USB cable to the computer.

  You would be grateful for the help

  My computer laptop win7 HP does not recognize my Canon zr65 camcorder.  I can't find Windows 7 drivers for the zr65.  My zr65 screen shows "DV IN" when I connect the USB cable to the computer.

  You would be grateful for the help

  Is - THIS (it's a link) your camera?

  Looks like Canon stopped supporting the camera in Windows XP.

• Windows 8 will not recognize discs in my dvd, DVD or CD player?

  I've upgraded to Vista to 8.  Windows * does not recognize the discs loaded in the dvd player.  Computer, you can see the drive but it won't read the disc in the drive.  I tried to update the drivers, 8 says that they are up-to-date.  I have run the Diagnostics Dell, said that my computer works well.  Have uninstalled and reinstalled the drivers for the dvd drive, no change.

  I installed windows media center, without change.  Do I have to install a soft DVD and which?

  This has been the most frustrating windows upgrade of my life

  Hello

  Readers appear in the computer?

• Windows XP will not recognize/run from floppy disks, although they are already formatted

  I bought a new box of floppy disks to the FORMAT and had several shots on 4 discs.  When I got home and tried to open it in my computer, it says to format the disks, which of course, I can't do that without losing pictures of shots.  I'm many miles from where I took these photos, and cannot resume, so how can I make Windows XP recognize that these disks are already formatted?  My email address is * address email is removed from the privacy * thanks for your help!

  You will probably need to clean your floppy drive.  There are floppy, cleaning kits, but these days, you might have to make a BLT of the search to find them, since they have not put floppy disk drives on computers for several years now.

  I hope this helps.  Good luck.

• My Windows 7 will not recognize my HP 1210 printer

  I am trying to install my printer HP 1210 all-in-one on my Windows 7 PC. It worked well on my XP PC. When I insert the disc printer through the whole until it reaches the part where plug you in the USB from the printer. At this point, the window is grayed out and you can not move forward.  Most of the forums indicate that Windows 7 had the pilot already in the software.  When I plug the USB in, all I get is the beep that the CAP is gone, without window telling me that the computer recognizes that it.  Later, I noticed that the disk is for Windows 98, 2000, ME and XP, not a word on Windows 7.   Every time I try to print, my PC says to install a printer.  I'd appreciate any help...

  Hello

  The printer is too old, no more support the Age of Vista or at least 7 years:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=90764#n187

  Please follow the instructions below and hope to get a generic driver for you to print basic:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=90764#n187

  Otherwise, it's time to buy a new printer.

  Kind regards.

• Windows 7 will not recognize gps

  I tried to reach my gps Magellan 3045 to windows 7, but it does not define a new drive, so I can access it. I need this so he will appoint the drive: Magellan, then I can use contact manager that they use. How can I get it to display properly. New drivers and how to get magellan uses a pilot Locator, you have to pay.

  I tried to reach my gps Magellan 3045 to windows 7, but it does not define a new drive, so I can access it. I need this so he will appoint the drive: Magellan, then I can use contact manager that they use. How can I get it to display properly. New drivers and how to get magellan uses a pilot Locator, you have to pay.

  Magellan is the manufacturer and the only place you should trust to get information on how to correctly use the device (like getting the drivers and software so it can communicate with any OS)-they are your main line of support regardless of the OS you are using.

  Is what SPECIFIC 3045?

  You have installed "Content Manager"?
  http://www.magellangps.com/ContentManager