Windows 7 "Windows Media Center" in the TV recording settings that represent the quality settings? That is to say: better = 1080 p?

When RECORDING LIVE TV using Windows 7 "Microsoft Media Center" there are quality parameters. The parameters are "better, better, good or fair.

On the BEST configuration, I can barely hold 118 min disk 240 min. What are the different settings in ppi? That is to say: better = 1080 p?
has some info. the parameters on compression, no resolution.
 
you will not get any high definition without a cable card and broadcast more 720.
 
 
 
Barb
 
MVP - Windows/entertainment and connected home
 
 
Please mark as answer if that answers your question
 
 
 
 

Tags: Windows

Similar Questions

  • Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

    I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

    Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

    I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

    Thank you

    Hello

    Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

    See also:

    This management recorded TV in Windows Media Center: frequently asked questions

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  • Xbox 360 scan windows media center for the new music?

    I just added some new music to my windows media center and the music does not appear on my xbox 360. is there a way to synchronize?

    Hi nwills,

    Ideally, the Xbox 360 should automatically scan if new music is added to Windows Media Center. However, you can also manually synchronize as follows.

    a: you can connect the Xbox. The Xbox Dashboard, select 'My Xbox', then select 'Windows Media Center' to receive the eight-digit code. This code allows your Xbox to recognize your media player on your computer.

    b. you can set up Windows Media Center on your PC. Click on the "tasks" and select "Add Extender". A screen will appear asking you to enter the eight digit of your Xbox 360 code.

    c. play music on your Xbox. Select 'Windows Media Center' in the menu 'My Xbox' and start playing music.

    Hope the helps of information. Please post back and we do know.
    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My Windows Media Center Download the latest TV programming guide

    With the help of Win 7 Home Prem SP1 64-bit.

    Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

    I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

    How to fix?

    PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

    Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
    Thanks for posting https://connect.microsoft.com/site1145
    You must include your provider name and postal code

    Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

  • How to watch Internet TV for Windows Media Center to the Japan?

    Hello

    Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

    I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

    My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

    I still believe that Internet TV is supported in the Japan.

    You have an idea for this troubleshooting?

    Please help me.

    Thank you

    Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
     
    > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
    >>
    >>
    >>
    > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
    >>
    >>
    >>
    > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
    >>
    >>
    >>
    > I still think that Internet TV is supported in the Japan.
     
     
    Microsoft has removed completely support Internet TV in September 2012.
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     
  • crashing Windows media center at the start of video library

    Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

    Windows 7 SP1 32 bit
    Thank you

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

    HI player67,

    I suggest you follow the steps below

    Method: 1

    Enable and disable Windows Media Center. To do this, follow the steps below:

    a. Click Start, click Control Panel and then double-click programs and features.

    b. click on Turn Windows Features on or off.

    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. extend the functionality of media

    d. turn off Windows Media Center of the box, and then click ok

    e. follow the same steps as above, this time place a check mark against the Windows Media Center box

    f. click Ok, and then restart the computer

    Method: 2

    Perform a check of the system files; read the following article to run the System File Check

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  • When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

    I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

    screen A___
    WMC has discovered the following:
    Analog cable (1 Tuner)

    Other tuners or TV signals were detected but will not be configured.
    (Show details)

    Is this Setup correct and complete?
    o Yes, configure TV with these results
    o no, show more options
    ________________
    When I click on show details, it is said:

    screen B___
    No TV Signal
    If a TV signal should be present, check your signal for following tuners connections and try again:
    Hauppauge WinTV 418 BDA Tuner
    ________________
    There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

    When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

    I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

    I would really appreciate any help and if more details are required, please let me know.  Thank you!

    -Doug

    I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

  • Internet to my windows media center tv did not work after that I just watched several shows on that and then all of a sudden it says no supported region or country.

    my location is currently set to United States English. Fix it or im not to buy another computer with windows again and im taking this one back thanks fix

    Run the Setup again.

    Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

    Does that help?

  • Windows Media Center could not update Playready after that kb3004394 has been installed.

    Windows Media Center could not update Playready after that kb3004394 has been installed.  I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

    and this procedure

    http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady

    Nothing worked and I'm pulling my hair out.  I use WMC with an HDHomeRun and a map of Time Warner cable.  This facility worked well for more than a year before installing this update.  The machine is a Dell XPS 8300 running windows 7 SP1.   I'm unable to watch all channels protected by DRM and I lost all my legally registered content.  It is a disaster and cost me 30 hours and counting.  Anyone have any ideas?

    I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.

    Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0

    But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.

    If not, allows to see what MS themselves have to say.

  • In Windows Media Center, one of my recorded tv programs blocking WMC, when you place the cursor on the title.

    WMC doesn't crash on any other recorded program tv and all the other game of TV very well.

    Is this perhaps a corupt file?  Where can I find this fmanually file so I can remove it?

    Thanks for your attention!

    Hi ClaytonNagle,

    Thank you for writing to Microsoft Communities. Before you start the troubleshooting steps, I need the following information:

    ·         Did you do changes on the computer before the show?

    ·         What version of the operating system is installed on the computer?

    Follow the steps in the article, and check.

    Solve problems with a Windows Media Center Extender device

    Let us know if you need more assistance. We will be happy to help you.

    Thank you.

  • When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

    After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

    I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

    Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

    When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

    How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

    Thank you

    Chris

    Hello, wilsman00

    As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

  • Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

    I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

    I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

    Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

    Please let me know if you need more information.

    ************

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 4A
    BCP1: 0000000076E5FF2A
    BCP2: 0000000000000002
    BCP3: 0000000000000000
    BCP4: FFFFF8800AADECA0
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\102110-15849-01.dmp
    C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

    Read our privacy statement online:
      http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\System32\en-US\erofflps.txt

    This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

    Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

    Thanks for your help.

  • Windows Media Center does not seem to recognize that I'm in the United Kingdom.

    I could not the skyplayer appears, and now I'm trying to get a video MSN to work but alas... No...

    Go into settings and download of updates does nothing.

    I went in the TV section and downloaded the settings of 5 MB, but it says the guide is not available and the icons are always for shows in the United States.

    I remember when I tried to get the skyplayer to work, I got as far as the discovery that this Media Center wouldn't recognize my location.

    There is some information herein, that will be helpful in your case is another question?

    Internet TV does not appear as an option in Windows Media Center
    http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/b4f9351d-4cb9-4493-97ba-baa26fcdc8e4

    Can't get internet tv
    http://www.SevenForums.com/Media-Center/32420-cannot-get-Internet-TV.html

    Cannot acess internet tv through windows Media Center 7
    http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/2fe52acb-0655-48c5-9fa2-3da6cb6f94d4

    Try your luck here too.

    http://social.answers.Microsoft.com/forums/en-us/w7pictures/threads

  • With windows media center on the network.

    I have my directv and computers connected to the internet and I try to use windows media center, but it says that it cannot find the tuner when I try to set up the tv. I have a Toshiba A215 with Windows Vista home premium (which apparently has no tuner). I need a tuner since I have everything connected to a network?  My tv wil recognize the computer: I use directv VOD and can get pictures from my computer, but the library does not recognize the tv. I use media center as it seems it would be an easy way to organize media.  I was also wondering if you can use media center or y at - it another way to other internet videos on TV (i.e. youtube...).  I have some suggestions that I'm not a person savy very tech.

    Thanks, BuckyTC

    Hello

    You will need a TV tuner card for watching live TV in Media center. If you already have a TV Tuner card and you get this error, then update
    the drivers for your TV tuner card to solve the problem.

    Click this link for instructions on how to update the drivers for a device:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Check out these links for help:

    Set up a TV signal in Windows Media Center:
    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-Center

    http://Windows.Microsoft.com/en-us/Windows7/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

    Watch TV in Windows Media Center: frequently asked questions:
    http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

    Watch Internet TV in Windows Media Center:
    http://Windows.Microsoft.com/en-us/Windows7/watch-Internet-TV-in-Windows-Media-Center

    How do I add or remove games in Windows XP

    |

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • How can I burn a DVD in Windows Media Center with the closed captioning information included?

    I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

    Hello
     
     
    1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
    2. after are burning the DVDs in which application you trying to play?

    I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
    To enable or disable subtitles for DVD
    a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
    b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
     
    For more information, refer to the article below.
    Show captions or subtitles in Windows Media Center
    http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
    See also the belowl link:

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • New update changed junk e-mail delete tab

    This new update changed by e-mail on my junk e-mail folder, I used to click on edit select all, and then press DELETE, now that the service is gone I have to manually do it 1 by 1?

  • Satellite P300D - 12L - problem of microphone with Yahoo messenger and Skype

    Hi again! I use Windows Vista 64 SP2 and I have a problem with the microphone, if I use Yahoo messenger, Skype.If I want someone to talk to, no one can hear me, or I don't hear from him. There is no difference whether I use Internet or wireless cable

  • A 'task manager' opened on my desk please help.

    A task manager opened on my Windows XP Media Center Edition. I don't seem to be able to close the Manager or meet the task.  What steps can I take to make this task manager go away?    Thank you.

  • Laptop HP 15-g018dx: I need a replacement charger

    My charger stopped working. I don't think it's my computer (I have a HP 15-g018dx). I want to find a replacement charger. I don't know if I have the warranty. I can't save it because my computer is dead.

  • Answer to a question

    On 9 November, I posted a question and a Sudarshan Bhat replied the Nov.10th asking for additional details and I responded by giving them the best of my abilities. Lack of receive a response that I posted a request to him as if I had offended him in