Windows 7 won't boot

Windows 7 fails to start and continue a loop to the start screen. I tried to use the Launcher to startup repair, but it does not solve the problem and this brings me to the startup configuration. I've tried safe mode, but it does not work and leads to the start screen. I also tried the "last known good configuration', but it did not work. I tried all F8 options, but each of them a loop to the start screen. I tried to go to the BIOS Setup, but it requires me to have a password, I don't know, nor have I created. Back door passwords do not work for me, and the password is 'hidden '. I don't know any other ideas to solve the problem.

You MAY be able to start using a system repair disc.  If you do not, you will need to find another job Windows7 system with the same number of bits (32 or 64) as yours.  Right click on the computer to see what is yours.

Take a blank writable CD or DVD with you.  Globe start, all programs, Maintenance.

Start your computer with the system repair disc.  Who can take an intervention such as pressing the right key of F for a list of startup.  Dell and many others, it is the F12 key.  You start the computer and immediately start pressing that key about once per second - in the same way you have to F8.

Tags: Windows

Similar Questions

  • Corrupted Windows 8 won't boot reinstall

    Hello

    I have HP Pavilion TouchSmart 22 comes with preinstalled Windows 8. I tried to play with the language, but cannot start Windows (black screen).

    How can I reinstall Windows 8 / 8.1?

    See you soon,.

    Abdul

    Hello

    I have HP Pavilion TouchSmart 22 comes with preinstalled Windows 8. I tried to play with the language, but cannot start Windows (black screen).

    How can I reinstall Windows 8 / 8.1?

    See you soon,.

    Abdul

    If Windows 8 does not correctly open, perform the following steps to recover the computer:
    NOTE: If only the hard disk recovery partition does not work properly, this method does not work and an error message is displayed. If an error message indicates that the system recovery cannot be performed in the splash screen, a set of recovery discs or a USB recovery flash drive is necessary to perform a system recovery. Follow the steps in one of the following sections, depending on the available recovery media: recovery of recovery (Windows 8) discs or recovery from a USB flash drive (Windows 8) .
    1. Turn off the computer.
    2. Cables and devices to disconnect all the connected such as personal media players, USB drives, printers and faxes. Remove support for internal hard drives and remove any recently added hardware internally. Disconnect not the monitor, keyboard, mouse or power cord.
    3. Turn on the computer and repeatedly the F11 key about once per second, up to the first screen and then follow these instructions:
      1. Click to select the language.
      2. Click to select the keyboard layout.
      3. The computer restarts. If the hard disk recovery partition does not work, choose an Option appears. Click on Troubleshooting.
        Figure 189: choose from a menu of options

      4. On the troubleshooting screen, click on Recovery Manager. Recovery Manager opens.
        Figure 190: Troubleshooting screen

      5. In the operating system selection screen, click your operating system. Recovery Manager opens.
    4. Recovery Manager opens. Under I need help immediately, click System Restore.
      Figure 191: Recovery Manager main screen

    5. When the system recovery prompts you to back up your files, select a backup option:
      • If you have already saved personal files, or you do not want to back up personal files, select recover without backing up your files, and then click Next. Go to the next step.
    ? CC = jm & lc = en & dlc = en & docname = c03489643 #N5145">
    Figure 192: Recovery Manager: first backup your files

    1. Select back up your files first (recommended), and then click Next.
    2. Select the types of files to back up, and then click Next.
      Figure 193: Backup of the file window

    3. Recovery Manager scans the computer for storage devices. Select the storage device to store the backup, and then click Next.
      NOTE: If you select a CD or DVD drive, the computer invites you to insert a blank disc.

      Figure 194: Choose save location

    4. Depending on the media selected to store the backup files, the computer invites you to insert a blank disc or a USB flash drive. Insert the media into the computer, and then click Next.
      Figure 195: Media inserted file

    5. Recovery Manager shows progress in the backup and burn the files on the backup media.
      Figure 196: create backup media

    6. When Recovery Manager has done to back up files, delete the backup disk or device of storage and then click Next to continue the recovery process.
      NOTE: If the backup process fails, make sure that the capacity of the storage unit is sufficient to store files, or try to select disable certain types of files in order to reduce the amount of files that are copied. Other reasons for backup failures could result from corruption of files
    . In some cases, it is not possible to save files using this backup method.

    Figure 197: Full data backup

  • Click OK in the warnings that appear.
    Figure 198: unplug all WARNING devices

    Figure 199: User data reset WARNING

  • Recovery Manager reformats the Windows partition and reinstall the original software.
    Figure 200: Factory image restore progress

  • After system recovery is complete, click Finish to restart the computer. Complete the configuration screens and wait until the computer finishes the installation program.
    Figure 201: Restoration complete

  • Once the installation is complete, turn off the computer, reconnect all cables and devices and then turn on the computer.
  • Before using the computer, update and protect your computer by reinstalling all software antivirus and security that was installed before the system recovery.
  • Reinstall software that have been added after the purchase of the computer, and all files that were backed up.

  • Only UEFI won't boot Windows Installation DVD

    As you can see on my subject matter, my phone W520 won't boot from my Windows 7 Installation DVD when it is set to UEFI mode only. I get no error or anything, just the screen goes black for a second and go back to the Start Menu and when I select the DVD player. For what it's worth, my hard drive is already partitioned GPT, and I need to repair the installation.

    Before you ask for help, I just want to mention that I created this particular Installation DVD of Windows 7 using the all-in-one tutorial that I have 32-bit and 64 - bit options all on the same disc. The drive starts very well in boot mode "Legacy/UEFI", so I don't know what the problem is. Someone saw this?

    EDIT: I followed this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and I'm in step 14.


  • I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

    I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

    Hello

    Please check the help below document:

    Error download or update Adobe Creative Cloud applications

    You can also view the nets below where the issue has been addressed:

    Error 207 to "install Adobe".

    Adobe creative cloud installation does not work. Get the error code 207. All solutions?

    Kind regards

    Sheena

  • Satellite M40 won't boot bootable CD or DVD

    My Satellite CD or bootable DVD won't boot.
    I started before but now it won't.
    I tried taking into C, change the settings of the bios and F12.

    When I C it's a wit black screen a '_' who will blink for a few seconds, drive begins to spin but then windows starts.

    Any help would be welcome

    PS The CD is able to start another computer (DVD)

    Hello

    You can use ODD with Windows XP Home edition? Have you noticed a behavior strange disk Windows XP Home edition?

    If possible try to check with bootable Linux CD.

  • Satellite C50 won't boot to the top

    Hello

    My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

    Thanks in advance.

    You write about Windows or BIOS password?

    In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
    Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

    What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

    Is the cooling fan may be strong at the start of the machine?

  • Equium A100 PSAA43: CD rom drive won't boot from any CD

    Hello.

    I have a problem with the start on equium a100-psaa43 procedure.
    The problem is the cdrom won't boot any cd
    I mean recowery system or any other cd boot as a Live CD.

    My BIOS version 1.5
    I put in place a correct sequence in the bios Setup. I mean 1. Secondly, CD-ROM, is my hard drive.

    What can I do to fix this?

    Thank you.

    Hello

    First of all we should know if the CD rom drive can read any CD.
    Have you tried to read from the Windows OS CD? The operating system recognizes the CD inserted?

    If not, then possibly the ODD drive malfunctions and, therefore, it s not possible to start from the middle.

    Anyway, you can boo from the CD in different ways. First, you can press F12 and you will get a boot menu. There, you can choose bootable devices.
    In the second way, you can try to press the C key immediately after starting the laptop. This button starts the CD player.

  • My desktop won't boot to the top

    My desktop won't boot up it crosses the safe mode screen, acts as if it is loading windows displays the windows screen is then empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

    How to recover a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545 TaurArian [MVP] 2005-2010 - Update Services

  • Dell Dimension 5150 won t boot

    Hey guys! My Dell Dimension 5150/510 running Windows XP Home Edition SP3 won't boot for some reason any. Whenever I press the power button the power button just blinks and won't turn on. Please help as soon as POSSIBLE. Thank you! If you can do it in a video or BIC please :(

    md5diablo

    All that, suggest a power failure, first replace the PSU with a unit of work that is 'known', to see if that makes a difference.

    5150/E510 systems don't use exclusive Dell power supplies, you can install a generic ATX power supplies with either a power connector 24 pin or 20 + 4 pin main motherboard.

    Like the 5150/E510 has a rear panel open, a diet with or without the on/off switch can be used and can be purchased in most local computer stores or online.

    Need a power supply with two SATA power connectors.
       
    Bev.

  • I see two windows 'readers' when I boot with the Option key

    I had to reinstall Windows 10 (with BootCamp).  Now, I see two windows 'readers', when I boot with the Option key button.

    How can I remove a?

    Start two of them in the same installation of Windows?

  • I have windows 7 installed with boot camp.

    I have Windows 7 installed with boot camp and use it for some financial software and games. Is this compatible with El Capitan Win7 installation, if I update?  Thank you

    Yes. Please check that you have backups and disk not resized/re-partitioned, before the upgrade of the El Capitan. In addition, create a Windows system restore point before the upgrade.

  • 320 external USB HARD drive won't boot

    Hello!
    After working fine for 5 months, my disk 320 external HARD USB is now showing that it is not initialized. When I go to disk management and click to initialize it, it won't boot. Can someone tell me how to make this work? I'm sure I'll have to format too, but can't find any way to make that without initializing the HARD drive first.
    Any help would be appreciated.

    Hello

    Try removing the USB ports in Device Manager. After restarting again the USB ports should be recognised again.
    Then again connecting the external HARD drive.

    The second possibility is to use an external USB hub with an additional power supply.
    It is possible that the HARD drive needs more energy than the 500mA

  • My Satellite C660-155 won't boot to the top

    My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

    It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
    Any advice would be greatly appreciated.

    For better understanding, you must offer more specific information.
    You can enter boot options using F8 at startup?
    Figure option fix my computer in the list?
    You can boot OS in safe mode?

    Did you create the recovery disk?

  • Satellite L20 260 won't boot to the top, every time it freezes with no reason

    Hi all

    I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
    x 10, Daniele.

    Hello

    It's not easy to tell if the problem is software or hardware related.
    You must install the OS from the Toshiba Recovery CD and again test the functionality

    If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
    You can try using MemTest 3.5 tool.
    It checks the memory of a malfunction.

  • Satellite A30 won't boot upward and is stuck on "ROM PXE smoothly"

    A30 won't boot upward and is stuck in a loop

    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM.

    I have no recovery discs and bios does not disable all relevant parameters.

    Hello

    I assume that there is a problem with the HARD drive. You can enter the BIOS settings or not?

    Start the laptop please press F12 to view the list of all bootable devices. HARD drive is listed here?

Maybe you are looking for

  • I have to wait about 5 minutes between loading time and the Welcome screen

    Need me quite a long time to wait I'm not why. It worked normally until I installed a new type of explore (7.0) from the Internet, after that I restarted my computer, I have to wait about 5 minutes to see the Welcome screen. Can someone help me, than

  • Satellite P200 - problem with the use of disk HARD original as external drive

    I've been pulling on my hair for a month now and could do with help I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem The question I have is that the old drive of 200 GB sys

  • Safari disappeared on 6 +.

    I lost my Safari app on my 6 +.  I checked the App Store and you can download any browser except safari.  The logic is that Safari is preloaded.  I was using Chrome but started using Safari on my MacBook and it's much more user-friendly with Apple pr

  • Satellite M100 - evaluation period for BT stack?

    Hello If I use toshiba bt stack on my Satellite M100, it keeps telling me the evaluation period will expire soon. Is it because I'm using another dongle to brand? If I buy a dongle from toshiba this message will disappear? I had a lot of problems usi

  • Photosmart D110: Printable margins

    I have a word document (office 2010), created on a 3 "x 5" custom card index that allows to print up to 3/8 "from the edge of the paper on my computer running Windows 8. I had to get a new computer, because my motherboard is dead and now the paper is