Windows 8.1 access host a shared folder in Ubuntu 14.04 comments

Similar Questions

• user denied access to a shared folder on windows 2008 Server

  Hello I have a user who logs on to the domain, but access denied to the shared folder. I am admin on the server. I looked into his account and it must have access. Where should I look?

  DT

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Access to a shared folder is denied

  Hello

  I have 2 computers, 1 will win 8.1 and connected via Wi - Fi and the other works under Win 7 and connected with the cable.

  I had everything works fine until I replaced the Windows 7 computer HARD drive.

  I replaced the HARD drive, did a clean install from the same disc, set everything as it was including the same firewall (ESET, even for computers).

  Now I can't access some shared folders, even if I change all the settings in the PC of 8.1 Win.

  The permissions set for full access.

  Why is this and how to fix this?

  For shared folders, you must set the permissions, not one, but two times.

  

• Access to a shared folder hard blocks VMWare Fusion (started happening recently)

  I have access to my Mac OS X desktop as a folder within my VM and have it run this way for years without problem. Sometimes in the past month, VMWare has started completely freeze/lock up when I try to open the desktop folder in Win7 or if I try to open a file from an application running in Windows. I get no error message, just a Beachball Of Death, and VMWare will eventually (or not) report that Windows crashed and offer to reboot. Sometimes I have to force quit (and kill several VMWare process) until I can restart.

  If I restart in Mode safe, I can open/read/write files very well. I can also 'mirror' of my office (instead of share) and it works very well in this way, too, but this approach is not practical as I have so more can see my normal within Windows desktop, as it is replaced by all the files from my Mac desktop,

  I couldn't find all the online articles that were useful for the resolution of this problem, and it's impacting on my ability to do my job.

  Again, this has been working fine until recently. As El Capitan has been recently updated and VWWare Fusion has been recently updated Windows gets patches every week, I'm not sure which, if any, of those that could have caused the problem.

  Suggestions welcome.

  Here is my configuration:

  MBP 15 retina, mid 2015 running OS X 10.11.5

  16 GB of RAM (8GB assigned to Windows)

  500 GB SSD 120 GB assigned to Windows

  Win7 Pro 64-bit

  VMWare 8.1.1 (3771013)

  I tried re('repair') VMware Tools installation, but do not uninstall first. Just did the full cycle of uninstall/install and it is always difficult pop-up Windows (no BSD, just freezes and VWware with it). Process of the merger of VMware and vmware-vmx to hang (as shown in activity monitor).

  This is * only * happening if I share my desktop Mac computer. If I share any file, it works fine. Yet once, it only started recently.

  UPDATE

  Playing a hunch, I removed an alias (which points to a file on a network drive) in my office that I created recently (I had other aliases on my desk for several months, but none of them did for the network drives), and it now seems to work very well. What's weird is that I initially put crime aliases in a subfolder Desktop and VMware has worked well until I drove my cursor arrow on the subfolder (do not click to open it), when it crashed again. I put the back on my desktop and the "boom" alias, crashed almost immediately, which seems to confirm that the alias is the problem.

  Windows does make a kind of prediction "read-ahead" as you move your cursor and hovering over the records?

  In any case, the trigger seems to be an alias that points to a network drive, that hard to block Windows / VMware.

  Bug?

  are

• Windows XP can't see the shared folder windows 7

  I'm on a domain active directory and copied the files on a windows 7 and it distributes and everyone has access. All my window 7 can see n work fine with it. None of my XP units can access. I can ping to the IP address and I even use the IP address when no part mapping. Nothing seems to work I try.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Coldfusin MX 6.1 balance the load and access to the shared folder

  I hope someone can help me with this problem.
  I have 2 CF servers behind a hardware load balancer and the content is stored on a NAS device via a UNC share. Colfusion seems to access the files OK but every now and then, I get an error 404 who not disappear until I restart the coldfusion services.
  
  I have already disabled the caching and the problem persists.

  I'm having the same issue (among others) with CF7 balancing using Windows NLB. Apparently this is a known... bug there is a solution here, but it is not completely satisfactory if you get this on a lot of pages.

  http://www.TalkingTree.com/blog/index.cfm/2006/2/20/improper-caching-of-file-not-found

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Shared folder error "you do not have permission to access the file or folder you are trying to access to.

  Original title: shared folder

  try to share files and folders between my laptop and my pc... When I try to access partitions shared between them = I got this msg: "you don't have permission to access the file or folder you are trying to access. Contact your network administrator to request access"can u help?

  Hello

  Follow these steps:

  Step 1: Make this file and printer sharing is enabled, computers.

  Follow the steps listed in the link below to check the parameters and the essential elements to share files over the network:
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Also check if network discovery is enabled, the computer. Steps to follow:

  i. click on Start, click on Control Panel.

  II. Select network and sharing Center

  III. Select change advanced sharing settings

  (IV) in respect of network discovery, select Enable network discovery

  Step 2: check the sharing permission on the shared folder.
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Step 3: you can also try to disable your firewall program and security and then try to access to the shared folder. Make sure that you activate it if this step does not help.

  
  Note: Antivirus/Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  In addition, see these articles:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

• A shared folder on windows 2008 r2 is very slow

  Hi all

  The scenario is as below.

  1 Server - Windows 2008 r2 with all updates

  2. customers - both Windows 7 and Windows XP

  3. created a domain and all clients are part of the domain.

  4. we shared a number of folders on the server for clients to use.

  The problem is

  1. very slow access to the shared folder in client systems.

  2. sometimes all shared folders showes upward and sometimes not.

  3. sometimes very little, I mean 1 or 2 folder appear, despite 10 or more is shared.

  4. access is extremely slow.

  5. several once be the Member of the domain while accessing the share he asks credentials, even if the user connects using the domain credentials.

  Troubleshooting of the measures taken:

  1. update the server with all updates.

  2. check the network cables and switch.

  Now, we have recently reinstalled the server, which worked very well, because of some hardware of gradations.

  Please help, very urgent and necessary evil.

  Thanks in advance.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Shared folder report

  Hello
  
  Is it possible to restrict or grant access to the shared folder in report by specific user level (no role)?
  
  For example, there are 03 folder shared Sub & user access should be:
  Folder (only user1)
  Folder B (User2, user3)
  File C (user 4 only)

  Let's say your users have the role of the Sales Rep field, you could copy this role and name the field Sales Rep-1 and assign it to User1 and new copy this role and name field Sales Rep-2 and assign it to user2, etc.. By doing this, you can configure your records in relation to restrictions that may be made by role.

• access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network

  access denied to win xp computer teacher trying to access a shared folder on Windows 7 computer at home using a peer-to-peer network.  I enabled netbios over tcp/ip on computers

  Hello

  Try the steps listed in the link and check if this may help: "Access denied" error message when you try to open a file: http://support.microsoft.com/kb/810881

• Windows local service cannot access a shared folder

  Hi all

  Here's my question,
  My application (windows service) can not access the shared folder. What should I do to make this access?
  client OS (where my app): windows 2003 R2
  Server operating system (where the shared folder is): windows 7
  I tried to add login ANONYMOUS for authorization groups and that each has the access rights on the shared folder, but it does not work
  Please help on this.
  Thank you
  Levi

  Hi Levi,

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Cannot access a shared folder on the computer Windows 7 on a Windows Vista-based computer

  I'm having a problem.

  I have a small network in my house consists of three computers.  One is running XP, it has Vista Home Premium, and it has Windows 7 Home Premium.  I usually use wireless networks, but I have the same problem if I use wired connections through my router.

  All three computers can see each other when I display the network on each.  I can ping each computer from other computers.  The problem is that when I try to access a shared folder on the Windows 7 computer from the Vista computer, I get an error window popping up that says:

  \\computer-name is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The network location cannot be reached.  For more information about network troubleshooting, see Windows Help.

  I can get in the same shared folder on the XP computer.  I also have to shared folders on the XP computer Vista computer.

  I can also get to the shared folders on the XP and Vista computers on the Windows 7 computer.

  The only problem is learning to the shared folder on the Windows 7 computer Vista computer.

  The folder on the Windows 7 computer is configured to be shared by everyone.  Password sharing is disabled on all three computers.

  Any help would be appreciated.  If there is more information, I can give you, let me know.

  Thanks in advance,

  Bill

  Hi all

  Try this one:

  DISABLE password protected sharing"in Windows 7 network and sharing Center, advanced settings.

• Access denied error when the output directly in a shared folder in Windows 7

  I have two workstations, the first working (PC1) of Windows Server 2008 R2 and the other work (PC2) of Windows 7 Professional.

  I work on PC1 using the app called "MetaDimention" dealing with PDF files and generates output files as a separation of colors (CMYK color separation) TIFF files. The problem arises when I intend to exit that TIFF files generated by "MetaDimention" directly in the shared folder on the PC2 via the network "workgroup."

  The 'MetaDimention' gives me the error message: JobTicketMerger: the data output destination '\\EQCENTER1\TiffOut' is not valid (ERROR_ACCESS_DENIED).

  where "\\EQCENTER1\TiffOut" is the path to the folder shared network on PC2.

  I noticed this problem when I using Windows 7 and Windows Server 2008, 2012 as an output destination, but there is no problem when the destination using windows server 2003 path.

  I tried to Google the error message generated by the Application of MetaDimention and I found this thread on the other forum:

  MetaDimension output error - problem

  I have the same problem exactly as mentioned, it has, after several positions the person who asked about the problem, he said that he had found the solution by changing some services started as LocalAccount user! but I do not understand what it does exactly. and here's the quote from his original message: "solved!" some services started as LocalAccount, replaced by the user and all ok.

  Please tell me what can I do to solve this problem in some detail.

  Thank you

  Hi Dia,.

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• Problem connecting to a shared folder on the Mac of Windows VMFusion 4.1.3

  Hi - I use VMWare 4 and improved 4.1.2 to 4.1.3 last night, under Lion 10.7.4. Everything was fine last night, connected via VPN from home. Venus work this am, stopped, then restarted on the corporate network and I get and error message in Windows saying that I don't have permission to access the folders that are on the side of my Mac OSX, appearing as a shared folder on my Windows System. I get error message saying:

  \\vmware-host\Shared files is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if him have access permissions. MNo network provider has accepted the provided network path.

  I do not understand that as in sharing > shared folders I on the Mac with my files of reported data and also below that I mirror folders "Selected Documents".

  I'm running out of ideas - I thought that's all I needed. Have you tried closing down and rebooting, but still do not see my side Mac and my data.

  Any help much appreciated!

  Barrie

  It seems that the vmtools is not updated aftr you updated the merger.

  Try to re-install vmtools.