WIndows 8.1 does not start from the HARD drive

Similar Questions

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• XP does not start from the hard drive

  I have an old pc under win xp. It does not drive start hard when it starts. I always have a cd/dvd in master dvd for it to start windows players. Can anyone help?

  herikhi

  Hi herikhi,
   
  Change the start of the base system (Input Output) BIOS setting to boot from the hard drive.
   
  Consult the manual of the manufacturer, to do the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• A33 satellite will not start on the hard drive even after the installation of the new system

  Hello, I need help, my A33 does not start on a hard drive. It is to see the drive hard in the bios and even by operating the drive when you go to install. But as soon as it will boot to the hard drive, it is just a black screen. It is very strange that you can see the hard drive in the bios and even with a diagnostics disk. I can see, scan it and check it by starting with a diagnostic disk, but when I start the computer, it doesn't do anything.

  Help please!

  Stand by. Your ad is so confused. When you read can you understand what you wrote?

  BIOS recognizes the HARD drive correctly, no?
  When you use bootable disk for the installation of the OS is properly recognized HDD?
  You can install OS using the original recovery disc or by using the Microsoft installation disc?

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• Windows xp home does not start at the top.

  I have a desktop dell dimension 1100 with a windows xp home edition operating system. The system will not start mode 'from', I tried them all. Regardless of the mode that I use to start the system, I get a blue screen with the technical information: * Stop: 0 x 00000024 (0 x 00190203, 0x82FCB1D0, 0xc0000102, 0x00000000). I read the other posts with the same problem, but nothing works. Anyone have any ideas on how to solve this problem? Thank you.

  You should start your system in the XP Recovery Console and running chdsk/a:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Portege R500 does not start from the XP CD

  My basic problem is the following - I have a Portege r500 with Vista on it. I'm moving from Vista to XP Pro, but when I put a bootable XP installation CD in the drive, it turns, looking around for awhile and then I get a blank screen with a cursor blinking on it.

  Now, I've done this before, so I know that something is supposed to happen, but nothing don't. And I tried 3 well-known installation CD, is not a problem of CD. Do I need some update BIOS/firmware to boot from the CD on this thing? Or am I missing something?

  Help!

  Thank you.

  Often the Portege R500 should be able to boot from the CD/DVD drive and should begin the procedure of installation of the CD Win XP SP2 installation.

  But it is a tricky thing.
  The Portege R500 needs an Intel (r) Matrix Storage Manager (iMSM). This iMSM is necessary to recognize the HARD drive and install Win Xp on the HARD drive.

  I recommend you and create a new CD of Win XP starting with software called nLite to integrate the SP2 of Microsoft and Intel Matrix Storage Manager (iMSM) in Win XP.

  You can then use this CD for installation.

• Satellite A105 does not start from the CD Rom

  Today WinXP fall & I decide to reinstall.
  I change in the Bios to boot to the cd-rom first.
  But she continue to start the hard drive first. I don't know what to do, because I don't Win & I can't boot from any device except the HARD drive.

  Any body can help me? Can be extracted bios battary motherboard...

  Hello

  If you want to boot from the CD Rom, then a bootable Windows CD must be inserted in the first place.

  Immediately after starting the laptop, press the F12 key.
  This should allow the start on-screen menu then you could choose the ODD (CD/DVD drive) and the laptop should boot from the drive.

  Good bye

• Left without head does not start from the phone.

  Hello

  I have a problem with the part without a head.

  When I try to launch the app to Eclips, the app will be charged for phone and rotate the UI and parts without a head.

  Now if I restart the phone, headless part does not start even when I open the UI part,

  The headless part is to call the block function.

  Any idea will be very appreciated!

  Thank you!

  Your HL will start automatically in these two scenarios:
  (1) the application is installed on the device (there is no front)
  (2) the phone is restarted-> which is the magical part where your file bar - descriptor.xml is to record your target without head to call when the OS up bb.action.system.STARTED action.

  If you want your HL to be launched at the start of the user interface, you must manually call.

  Look here for an example of coding:
  https://github.com/RodgerLeblanc/HeadlessLight/BLOB/master/HeadlessLight/src/applicationui.cpp#L34-L...

• Organizing element does not start from the 12 EP welcome screen

  Organizing element refuses to boot from the first item welcome screen 12. I had the same problem with PSE12, which was solved by systematically starting from the taskbar. I failed to get the screen of welcome to PSE12. Ss12 and PSE12 parpadean normally also. I could produce a film without difficulty. Pluggable 8.1 Windows on an ACER Aspire 8920 32-bit with 4 GB of memory. Although having as bought PSE12 and ss12 together I only install ss12. Plug-in these Adobe products for several years.

  My catalogs are all in C:\Users\All Users\Adobe\Elements Organizer\Catalogs.

  Drag-VId

  A few considerations...

  1. How did you get your 12 elements Photoshop and first screens welcome of the 12 elements that set up

  First elements welcome screen

  

  2. If you open first elements 12 to the Expert workspace and click the Organizer tab at the bottom of the workspace Expert, can you open the workspace elements Organizer 12 from there? If you add multimedia/Organizer items, it works?

  3 have you tried to delete the elements Organizer 12 parameters to remedy any malfunction of the elements Organizer?

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  Elements Organizer

  12.0

  Organizer

  and in the record of the Organizer is the file psa.prf that you remove or disable. Folder Option show hidden files, folders and disks should be used to see the full path.

  Please review and then let us know of your progress.

  Thank you.

  RTA

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!