Windows 8.1 is not put into hibernation or sleep after installing the catalyst amd driver

Similar Questions

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• laptop is not put into hibernation after "standby mode"

  Reference Dell dear community,

  I have an Insipron 17R core i5 zm2410, NVIDIA Geforce 525 m, win8 64bits and I am facing a problem with hibernation mode / sleep.

  About 2 weeks ago my laptop went mode hibernation after beeing in mode 'sleep' for 2 hours on battery (for total draining of the battery to advoid).

  Now, it is not do it anymore but remains on "sleep" during all the time and drains the battery.

  I usually remove the power cable from the laptop during the night because of the noise of the adapter and the laptop always put into hibernation after beeing in mode 'sleep'. I went over the configuration in options plans and power supply and even reset and configured them again, without success.

  The only changes made to the system are important updates of windows

  I'm grateful for any suggestions or solutions.

  Have you checked to see if Hibernation is still active? Open an administrator mode command prompt and type: powercfg/h on.

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Unable to see put into hibernation or sleep option

  Is there a sleep button on the MICROSOFT comfort desktop 5000 can I use Hibernate as I did on my Microsoft digital media Pro keyboard? Why Hibernate does not appear in my shutdown options when turned on. Windows 7 Home premium 64-bit.

  Hello Laura,

  Thank you for the update.

  Please, try the following steps and check.

  Go to: Control Panel > Power Options > change plan settings > change advanced power settings, and then expand these options:

  [+] Sleep

  [+] Allow hybrid sleep

  And set the options under "Allow hybrid sleep"to"Off".

  Now, restart the computer once and check the status.

  Post back with the results. We will be happy to help you further.

  Thank you

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.

• Satellite L50-A01Q - WLAN not detected after installing the Atheros WLAN driver

  I have a C50-A01Q. I recently replace the hard drive for an SSD. I installed Win8.1 via a DVD downloaded from Microsoft. I also installed the Download Driver Atheros Wireless LAN from Toshiba. However, the system does not recognize the WLAN. Someone reinstall windows 8.1? How did you get the driver?

  Maybe your laptop has a Realtek or Intel WLAN card inside. Specification of your laptop does not for me so I can't say with certainty what WLAN card is inside.
  Try to install other drivers and check in Device Manager.

• CD player not recognized after installing the second hard drive

  My OptiPlex 755 Windows 7 with a ran fine until I installed a second hard drive.  Now only the hard drives are recognized.  I have cd players connected to SATA 2 and 3 a the SATA drives 0 and 1.

  The 755 a 0 and 1 and then 2-3 THEN esata.

  Other chipsets have 0 1 2 3 4 5 and raid 5 capacity.

  These options appear as
  SATA 3
  for the mini tower,.
  SATA
  0
  through
  SATA 2
  for the
  Desktop
  for

  The blue connector is drive 0

  The 2nd Black, this is the dvd's.

  There is no car setting just the port enabled or disabled.

  2nd HARD DRIVE GOES ON THE WHITE CONNECTOR

  The 2nd CD GOES ON THE CONNECTOR FOLLOWING

  DRIVE CABLE IS BLUE AND CD CABLES ARE ORANGE.

  

  

  

• Put into hibernation and sleep does not

  I'm running Windows 7 on HP ProDesk 400 G1 Mt.  Computer won't rest not in mode "sleep".  Followed all the other suggestions forum: passed through Device Manager to uncheck all ' authorize computer startup device; "disconnected all devices, including the router/modem; Cleaning to start the program; has run several programs to identify unwanted programs.   But the computer always wakes up from his sleep periodically, if I put it to sleep or let that stop you with auto power saving function.

  I don't get the Hibernate to the start/stop option.  A suggestion of the forum was to go to configsys and activate the hibernation, but I don't have the answer to configsys that would allow me to activate the Hibernate.  Configsys gave me a cbreaks and when I typed hibernation in various forms, I got message that command was not recognized.

  -r-

  I've linked a Help file for you. It's pretty intense.

• My new Yoga 2 13 "has not put into hibernation!

  Hi all

  I recently bought a Yoga 2 Windows 8.1, 8 GB of RAM, 256 GB SSD and I am almost happy with it. However, there are some irritating flaws that I can't fix. One of them is the absence of mode of hibernation, which I use on a daily basis, to avoid launch my favorite applications.

  When I click on the 'shutdown' icon, I volunteered with: Shutdown / sleep / Reboot, but no hibernation mode.

  How can I report this mode?

  Thanks in advance for any help!

  As with all PC of Windows 8, go here:

  Control Panel\All Control Panel Items\Power Options\System Settings

• DV7-6199us is not put into hibernation when battery low - just died

  Some time in the last month or two, my laptop properly leave off when the battery is low.  It's supposed to the hibernation when the battery reaches 10%:

  

  It used to work properly, but now he dies suddenly (off, lose all my work) when the battery is at a level critical.  I don't know what level because he always catches me by surprise.

  I tried to change the critical levels to see if I could do to begin to pay attention, but that did not help.

  How can I get to Hibernate properly?

  Gary

  Hi garyfritz,

  At this point, we have done everything, but replace the battery. Noted that energy seems good but it is two years and the laptop will usually survive battery. Maybe it's time to get a new battery or leave it at the levels you set now.

  Thank you

• Satellite L305-S5885 will not be put into hibernation or sleep

  Satellite L305-S5885 on Vista premium SP1. It was bought by circuit city, and installed all the drivers from Toshiba.
  If I try to hibernation or standby, the laptop just restarts. I use the "balanced" power mode

  Does anyone have an idea how to solve this problem?

  Hello!

  Have you tried updating the BIOS too?

  You can find it on the Toshiba site. Check it!
  http://www.CSD.Toshiba.com-online download

  Good bye

• My laptop is not put into hibernation

  I get the message Alp your pointing device prevents the system to Hibernate. If the problem reoccur, so far the pilot.
  I try to update, but there is not available so far.
  I had the same problem on my previous Satellite.
  Any suggestion?

  Hello

  All drivers for Toshiba units, you can find on the official site.
  Visit this link:
  http://EU.computers.Toshiba-Europe.com then support & downloads

  Best regards

  Good bye

• my pc will not come not put into hibernation. It did once but the habit now. ____

  I have the monitor turns off in 1 minute.  hard drives off in 3 minutes.  keep in 3 minutes.  Hibernate in 5 minutes. BUT nothing happens

  Hard disks turn off, and should I enter stand-by in 3 minutes?

  If this is not the case, why not just have the monitor off when you want, and then the Hibernate in any time you want. See if it works.

  TaurArian [MVP] 2005-2011 - Update Services

• After the XP disk cleanup, now put into hibernation and sleep are no longer available

  Doing a cover of 'non-destructive' solved the problem!

  Restore Windows XP completely solved the problem.