Windows 8.1 Lenovo z500 drivers

Similar Questions

• There is no Windows 7 for the P500 or Z500 drivers

  Windows 7 for the P500 or Z500 drivers are unavailable, is this correct?

  I checked support of lenovo download and they aren't there. Is there another place to get?

  I think a 4358-22U is an IdeaPad N580.

  Kind regards.

• How to upgrade Lenovo Z500, windows 8, Windows 8.1

  I recently updated Lenovo Z500 Windows 8.1 but I have to reset and return to windows 8, not updated correctly.
  Can someone let me know how can I update windows 8 to 8.1.
  Should I uninstall some programs also before you update or install drivers windows 8.1 before update of windows 8 to 8.1

  Umang says:

  Can someone let me know how can I update windows 8 to 8.1.
  Should I uninstall some programs also before you update or install drivers windows 8.1 before update of windows 8 to 8.1

  Hi Umang,

  Read the first post and the information here:

  http://forums.Lenovo.com/T5/Windows-8-and-8-1/list-can-I-upgrade-to-8-1-compatible-models-and-possib...

  Inslall 8.1 Lenovo drivers before spend you 8 to 8.1.

  See you soon

  DragonRider

• Lenovo Z500 can't keep time (clock drift)

  Hello

  I had real problems with my new Lenovo Z500 on Win8 and the big one at the moment is its inability to keep time. After a reboot, it will keep the time that I stopped him. Then after that it will be adrift. For example, while he was working there, I had a movie on. I checked the time at the end of the film as it must have been was late again according to my laptop that this is only about 30 minutes later.

  This becomes a huge pain. All files have the incorrect date and to have a clock which cannot keep time is next useless.

  On a very old PC I guess that's the CMOS battery on its way, but I only got the laptop a few days! I would probably cancel my warranty replacement anyway.

  Any help would be appreciated.

  Richard

  Do check my laptop about 18 hours after I finally stopped him and that time seems correct. That said, I checked my data and the time settings and synced it on start up. Windows may have cancelled my test!

  I downloaded and installed three drivers. It's the BIOS and positive battery that I believe was the chipset. My memory is a little fuzzy on the third, but the BIOS is more likely to be solved.

  It will stop for a brief moment, just to be sure.

• Lenovo Z500 turns off a few seconds after the round. He started for the second time.

  Hello

  For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.

  I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.

  I'm going to enjoy all the ideas.

  I thought to reinstall Windows, but maybe you know the solution to fix it.

  P.S. I have the latest version of the BIOS installed.

  Kind regards

  Albert

  I think I solved the problem.

  Problem has been activated "quick start" in the power settings.

  To turn off the quick start, follow these instructions:

  1. Open the start screen
  2. type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
  3. Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
  4. Uncheck the enable (active)-quick start .
  5. That's all. Now the quick start feature is disabled.

  Now everything works fine, z500 boots each time correctly with the first run.

  Thanks LenBlazer.

• lenovovhid root for Lenovo z500

  Hi all

  I bought Lenovo z500. After teacher win 7 x 64 installation I couldn't install a driver. 'unknown currency' ID: root lenovovhid.

  Please can sombody help?

  Thank you

  Lekso

  Hi Lekso

  Welcome to the Forums of Lenovo Comunity

  For this particular device, please install the driver for Windows 7. I shared you link below.

  Driver (AzureWave, Bison, Chicony, D - max) camera for Windows 7 (32-bit, 64-bit):

  http://download.Lenovo.com/Consumer/mobiles/1hca01ww.exe

  Best regards

  mtnzkn

• Cannot get Plantronics bluetooth headset appears as reading or a recorder in Panel - > sound in Windows 7 with Lenovo ThinkPad

  I installed a Plantronics Voyager legend UC bluetooth headset to my work provided Lenovo ThinkPad laptop computer running Windows 7. The helmet looks like a device in the Panel--> devices and printers. However, it does not show as a device in the control--> tabs sound playback Panel or registration.  I need the headset to the playback device for my work-VoIP phone.

  I tried to remove the helmet and reinstall, but I can't delete it in the Panel--> devices and printers. When I locate and right click, remove or uninstall is not an option. I went to the control panel--> Manager--> audio video devices and game controllers, which are there and uninstalled. I then unplugged the connector of the headset, and the headset powered off and rebooted. I then plugged the connector UBS back in and turned the headset. The PC began to reinstall the drivers, but the headphones still did not appear in the sound tabs.

  I have been all over the internet trying to find a solution to this problem and so far have not been successful. I spent hours on this and it shouldn't be so hard, but it turns out be. I appreciate any help you can provide.

  Thank you!

  Thanks for your reply Mann. Here's the answer to your questons.

  1. Were you able to use this helmet earlier on this computer? Answer: Yes, it didn't work and appeared in the reading tabs and the recording of sounds. However, I accidentally deleted it--> sound when I was trying to troubleshoot why I couldn't hear the narration in the course of eLearing played on our intranet via the headphones. I only meant to change the settings so that I could make the speaker/HP the default device. BIG MISTAKE because now I can't get it to reinstall and appear in the tabs of playback and recording.
  2. Have you checked to connect the headset to any other computer, it works on other computers? Answer: The only other computer I have is an Apple MacBook Pro. I plugged the USB connector to the PC and seem to work although I can't do a one-to-one comparison.
  3. You said that Windows has started to install drivers automatically after connecting the headset and the computer restarted after the removal of noise, the video controller and game, was the driver installed successfully? Answer: Yes, but it just does not appear not liked as an option in the tabs of playback or recording.
  4. Other audio devices work fine on this computer? The only other device is the computer speakers and they work fine.

  Regarding method 1. I had already installed and run the file MicrosoftFixit.Devices.exe that you provided even if I ran again and this has not fixed the problem.

  With respect to method 2. I checked and show disabled devices is checked. The only other devices in playback and recording are speakers/HP and Realtek HD Audio Output 2.

  UPDATE! I removed the USB of the headphone connector and plugged into the MAC, and then removed the Mac and plugged into the PC, that is! The helmet now presents itself as an option in the tabs of the reading and recording. Yes! I was able to select it and set as device by default, tested the VoIP phone and it works all! Phew! I was about to give up on the VoIP phone. Thank you.

• On Windows 7 Satellite L300 Vista drivers works

  I'm guessing that the answer is 'yes', but all the Vista drivers work on Windows 7 (clean install) - for example I speak for the silent acoustic version 2.02.01 & 2.02.03 for Satelitte L300?

  Not all do the job, but most of them ;)
  I worked m not a L300 owner but tried to install some other Vista on Windows 7 and not all drivers
  But I guess you will have to test it yourself.

• Error in installing Windows XP in Lenovo G560

  Hello

  I use lenovo G560 with Windows 7. Now I don't want to use it. So I decided to install Windows XP as normally in desktop computers I used desktop computers only.

  Boot from the CD and windows Set started with loading files... in the Middle, it stops showing the Blue Screen of Death , I'm not sure about why you came.

  Please suggest how to install Windows XP to replace windows 7 in lenovo G560

  When you see the lenovo logo, press f2 to load bios, on the configuration tab, change the sata mode selection settings, save and exit.

  to burn discs of recovery, check the user manuals.

• Problem disc HARD Lenovo Z500

  Hello

  I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?

  Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.

  alessionikky wrote:

  Hello

  I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?

  Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.

  Try the program of diagnosis of the manufacturer of the hard disk to be sure.

• HP Deskjet F2480: Windows 10 HP Deskjet F2480 drivers

  Hello

  I recently updated my Windows 7 to Windows 10 and my printer drivers do not work. I need the drivers dedicated for Windows 10 please. If they exist, that they are not displayed on the page of the driver for the F2480.

  Thank you.

  Hello

  Did you try the drivers for Windows 8.1, they work even for Windows 10 too.

  Here is the link for Windows 8.1 drivers.

  http://ftp.HP.com/pub/softlib/software12/COL29199/al-109119-2/DJ_AIO_06_F2400_NonNet_Full_Win_WW_140_404-4.exe

  Although I am an employee of HP, I speak for myself and not for HP.
  Say 'Thank you' by clicking the 'Thumbs Up' in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• Update of Windows configured to never install drivers

  My computer Gateway dx 4640 OS windows vista top pk2

  Please how I have configured windows update to install the drivers and how to problem of Fixer with \driver:\acpi answer sloww

  thonson35,

  According to conventional wisdom, you should not install new drivers, if all goes well with your computer, because doing so may mess up something that worked fine before. It is true that this side effect can occur, but you're much more likely to improve the performance of your PC.

  To minimize your risk of breaking your PC with a bum driver update, create first a point of system restore you can come back to if something is wrong: type to create a restore point in the search box of the start menu and click on Create... in the window that opens. This will create a safety net that you have access to, no matter what happens.

  Your next step in upgrading the drivers should be updated to Windows. Click search for updates, and then click the text noting how many updates are available. Generally Microsoft class driver as optional updates, so even if the text Windows Update indicates that you have not need for critical updates, you should always click the link. Check the box next to all the drivers updated, and then click OK to install.

  Then, visit the Web site of the manufacturer of your computer or devices you have connected to it. Check the support page for your machine and download the new drivers that appear. In most cases, you will need to know the particular piece of hardware that is installed on your computer (check Windows Device Manager if you are not sure of the model number of a component is), and you should only download the drivers you need. Install the new drivers according to the instructions; This step usually involves a simple executable file running and then restart. Test your system carefully after each driver installation and make additional system if restore points you're upgrading of several drivers. The biggest performance gains result from an update of your BIOS, motherboard drivers, and graphics card drivers.

  Credit: PCWORLD.COM

  05/15 / 1104:32: 50 am

• Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship.

  Clean the concert of dual core 2.4 Install windows 7 Dell XPS 430, drivers RAID DO RAID the relationship. Two 1 TB drives, WD Black Cavier. 1. I wanted to know if I should format the OS drive first, before installation or installation? 2 should I let a slave to data disc (data is stored) or remove the installation? and 3 if I don't have a RAID relationship do I need to install RAID drivers with the installation with USB?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/need-steps-to-configure-RAID-1-in-Windows-7-OS/3ec151ee-213C-4D04-a0f4-1d8c7eb6c1f3

  It will be useful.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• I have a VGN-FW290 laptop, I installed Window Pro 8, are there drivers update for my model number

  I have a VGN-FW290 laptop, I installed Window Pro 8, are there drivers update for my model number

  John_Miller53,

  Unfortunately there is no Win 8 driver for this unit on our esupport.  There are Win 7 drivers but I don't know if it will work or not...