Windows 8 Advanced Boot does not work * SOLVED *.

I recently got the Ouya console and I'm looking to develop games for it. Part of the configuration forces me to install the drivers manually unsigned, but Windows 8 prevents this from happening. I need to disable driver signing enforcement and I read that you can make settings PC > General > early start.

The PROBLEM is when I have go ahead and click on troubleshooting and advanced startup, the screen goes black and nothing is displayed. I tried auto repair and it does the same thing! A normal restart works fact just fine and if a normal stopping and starting at the top. The computer itself still works as I can hear it and can switch on and off on my keyboard caps lock (I see the light switch on). I have to reset hard at my computer in holding the power at this point button. The strange thing is that I have a Macbook Pro with Win8 installed on it and the advance set up works very well! I would just use it but my office is a much better computer and my mac just don't cut it for development.

Someone at - it suggestions? Could this be my hard drive failing quick start? Or maybe my graphics card is just crazy?

I have a MSI 6850 with the latest amd for win8 64-bit drivers.

Very well. The MSI graphics card in that I added WAS the question. I opened the office and put in the Nvidia GT 620, one computer comes with and it works beautifully. Guess I'll have to buy a new graphics card and nvidia make it this time. !

: D

Tags: Windows

Similar Questions

  • Acer Windows 7 upgrade kit does NOT work!

    Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

    Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

    Windows 7 Edition Home Premium x 64 (64-bit)

    English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

    32 bit
    http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

    ImgBurn - supporting the creation of CD more. ISO files,
    It supports a wide range of image file formats, and it's free.
    (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
    http://www.ImgBurn.com/

    http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

    Download and install burn ISO Gear (free):
    http://www.GearSoftware.com/gear-ISO-burn.php

    Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

    ------------------------------------------------------

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the system drive, click on remove (DO NOT remove the recovery when it exists)

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

  • reinstalled my windows but forward button does not work

    reinstalled my windows but forward button does not work or hibernation modded shows in power options

    Hello Rahul,

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Let us work as a team and try to solve this problem.

    If I understand correctly, you have problems with node in sleep and extended in Windows XP.

    Please read the following article and see if that helps:

    How to solve the problems of hibernation and standby in Windows XP:

    http://support.Microsoft.com/kb/907477

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

  • Driver Ethernet for Windows XP Home edition does not work on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

    As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

    Hello

    I can't believe that you are not able to install the LAN on this Satellite A100 driver!

    However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

    If you want you can download and install page Intel network driver:

    http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

    You will find the drivers Intel 8256 x Ethernet controllers

    Good bye

  • Windows 7 Upgrade Advisor does not work on my Windows XP Professional

    Windows 7 Upgrade Advisor does not work on my laptop Windows XP Professional Version 2002 SP3 (Panasonic-CF-30). Is there a reason why?

    One thing that can stop him to run the .net framework.  Please ensure that the latest version is installed.

  • The Windows media player 11 does not work correctly

    My windows media player 11 does not work properly

    whenever I go to open a video with it, it appears on the taskbar, you can here the sound, but the player himself does not appear on the destop

    I tried to reinstall the drive, and I get the same thing.

    If I go to roll back the player, add remove programs say it has been restored, but the media runtime in Add Remove programs won't disappear because it says that windows media player 11 is always there.

    Help

    Hello rockys_rod,

    To fix it, simply remove your old library files. Then have Windows Media Player find your new files. It will not destroy your music files.

    How to get WMP to re - index your music:

    1. close Microsoft Media Player.
    2. click on Start and then run
    3. in the box, type the following:
    [list] %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player

    4. click on OK and a folder containing your library files will be displayed
    5. delete all files ending with .wmdb
    6. open Microsoft Media Player
    7. press F3
    8. Select the addresses of your music files
    9 WMP will re-index your music.

    If this does not help, try the FixIt in the article below:
    KB Article ID: 947541 -Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file

    Please reply back and let us know if this can help.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows Easy Transfer 7 does not work on Vista

    Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

    Hi boris99,

    You can see the following thread, which presents a similar problem discussed.

    Windows 7 easy transfer does not work on Vista Home Premium 32

  • Microsoft windows live mail 2011 does not work properly

    Original title: "I'm on windows7 and my windows live mail 2011 does not work correctly." I think that the best way to get there is to uninstall and reinstall... Please provide clear instructions on how to proceed. Any better ideas? »

    I'm on windows7 and my windows live mail 2011 does not work properly. I think that the best way to get there is to uninstall and reinstall... Please provide clear instructions on how to proceed. All the best ideas?

    Ask in the Windows Live Solution Center Mail Portal. Brian Tillman [MVP-Outlook]
    --------------------------------
    https://MVP.support.Microsoft.com/profile/Brian.Tillman
    If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

  • Windows to this day does not work on my Windows 7.

    Original title: windows update

    Windows to this day does not work on my windows 7, the new facility. its valid correctly.

    Base on any relocation is to disable windows update search ("Never search updates", restart setting). Then install preferably a recent customer of update windows manually, KB3102810. From this point on windows update is used for the initial search.

    Best regards, VZ

  • Effects of Dolby Advanced Audio does not work on Windows 8.1

    Hello

    I've upgraded my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8: Control Panel in the equalizer Dolby works but switch the Dolby Advanced Audio check box has no effect, so there is no more virtualization surround and 3 effects 'Movie', 'Music', and 'The voice' don't work anymore.

    Now my computer laptop speakers sounds choppy... Could you help me solve this problem?

    OK I tried a lot of IDT Audio Driver version and I found one that works correctly with Windows 8.1: the 6.10.6482 version. Here are the questions I lived on other versions of this driver:

    6.10.6425 to 6.10.6466 : Dolby effects working correctly, by speakers is good, but in the headphones sound is not "strengthen". Equalizer does not work.

    6.10.6491 and more : Equalizer works but other effects dolby (Surround virtualization, Volume Leveler, etc.) does not work and the sound from the speakers of the laptop is low (even at 100%).

    If you have Dolby Advanced Audio V2, 8.1 Windows on your PC and you meet one of these questions, the 6.10.6482 driver is the best for you, because all the features (virtualization Surround, Volume Leveler, equalizer, etc.) works.

    To download: click here and follow the instructions on the screen.

    HP so please update drivers download pages... Ex: 2242sf drivers page, it is only the IDT 6.10.6425 driver for Windows 8.1 while the 6.10.6482 is available on other sites.

  • Windows 7, update services does not work

    I have a problem to update software in windows 7.

    I have a HP G72 laptop.

    I replaced my hard drive. 350GB, Western Digital 750Go digital West.

    -J' made an image of the C partitie (if it is 3 months, installed for the recovery partition, new updated worked after that).

    The new disk hard there however any possible updates of windows. (the bar is red on the left).

    -After that, I reinstalled the original image when the laptop was new (DVD image). Same result on updates.

    -Remove the folders from the dir c/windows/SoftwareDistibution, no results.

    -Checked the status of services: windows update is statred and in automatic mode.

    N ' tried microsoft 'Fix - it' no results.

    -updated the drivers intel, no results.

    -Downloaded System Update Readiness of windows to resolve the error (Windows6 1 - KB982018 - v3 - x 64). When installing, I get the error 0xc8000247. So I'm not able to install this software.

    Looked after errors in the CBS.log newspaper: found M²: cannot read the time value RptTime from the registry. [HRESULT = 0 X 80070490 ERROR_NOT_FOUND]

    Do a clean boot, without result.

    Does anyone know a solution to this problem.

    Thank you.

    Ed.

    Windows 7, update services does not, RESOLVED.

    The problem occurs when you change your hard drive for a bigger, in my hard drive of the case a GB Western Digital 340 WD 750 GB drive hard.

    For the Windows automatic updates again you need update the Intel Rapid Storage Technology Driverdriver. It will not be updated when you have intel check your drivers! For me, only the 9.5.6.1001 version worked. This driver can be found at http://support.hp.com/us-en/document/c02219204 .

    Versions available at https://downloadcenter.intel.com/SearchResult.aspx?lang=eng & ProductFamily = Software + Products & ProductLine = Chipset + Software & ProductProduct = Intel % c2% ae + Rapid + Storage + Technology + (Intel % c2% ae + RST) did not work for me (I tried the form version 12.8.0.106 08/08/2013.) Why does not the superior version is not clear to me.

    Good luck to solve you yours it took me two weeks to find it.

    Ed.

  • Windows 7 Disk Defragmenter does not work

    All of a sudden, I get the following error message when you try to run Defrag

    "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again.',

    that does not work.

    Assuming that task scheduler was enabled and the Defragmenter tool still does not work, here is a routine that I have compiled over time which proved to be effective to solve the problems of Defragmenter:

    There are several reasons why the built-in Defragmenter may not work correctly:

    0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

    1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

    2. the disc is damaged and must be repaired. Solution:

    a. open "My computer" and right-click on the drive that you want to disable frag.
    b. Select 'Properties' and click on 'tools '.
    c. Select "Check now" to check the drive for errors.
    d. Select the two options and click on 'start '.

    (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

    3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

    a. start - all programs - Accessories - System Tools - System Restore (click here to open);
    b. Select a good restore point before you start having problems with Disk Defragmenter.
    c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

    4. There are other programs that run the Defragmenter interruption integrated. Solution:
    a. close all running programs.
    b. If you think there may be some programs that run in the background.
    c. press Ctrl + Alt + Delete and
    d. Select "start Task Manager".
    e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

    5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

    6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

    7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

    There are several ways to re - install the built-in Defragmenter:

    A:
    a. open the menu 'start '.
    b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
    c. in the window that opens, find the file named "dfrg.inf.
    d. right-click on "dfrg.inf" and "install".

    B:
    a. go into "start > run" on your computer.
    b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
    3. click 'OK' to make the program automatically reinstall itself.

    C:
    a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
    b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
    c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

    8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

    Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

    Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

    http://Disk-Defragmenter-software-review.TopTenReviews.com/
    Place it at the top of the page is the only defrag program that also prevents the fragmentation (see comment).

    Why is it good to prevent fragmentation?

    Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

    Find out what the review has to say on this.

    Good luck to you!

    Bill R TechSpec

    PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

  • HP 500 b Micro Tower: after upgrade to windows 10 dvd player does not work

    Before the update windows 7 windows 10, I ran the windows 10 application to check all my gear.

    Windows 10 says that all my hardware is compatible with windows 10.

    After installing windpws 10 does not work my cd/dvd litescribe drive.

    There is power coming to my dvd player, because I can open & close the player.

    Device Manager does not detect my dvd drive.

    I've updated all my drivers through HP assistant & he said that all my drivers are up to date.

    My pc is a HP 500 b Micro Tower

    Product number: XT419EA #ACQ

    Can someone help me fimding good firmware for my dvd player.

    Hello:

    See that if steps listed from the link below resolution 5 solves the problem.

    https://support.Microsoft.com/en-us/KB/314060

  • Windows Server Update service does not work after the installation of KB2720211

    I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

    The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

    1 deleted WSUS and restarted and installed it again.

    2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

    2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

    3. install the KB2720211.

    4. installation KB2734608

    5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

    I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

    Original title:

    I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

    I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

    Hi Matthew,

    The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

    Now, check out these links and return to the State of the question.

    When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

    Here are a few common problems with drivers and the means to solve them.

    See the following link for more information:

    Tips for solving common driver problems

    Also check out the following link and run the fixit available.

    Hardware devices do not work or are not detected in Windows

    The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

Maybe you are looking for