Windows 8 Crash when the display is off

Similar Questions

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• Help: Fuze distorts the sound when the display turns off

  Hello

  Since a few days, I own my rocket. Today, I recognized the following problem:

  When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

  When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

  The EQ is set to standard.

  Has anyone experienced the same problem?

  I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

  Thanks in advance,

  Stefan

  This problem is fixed in the next firmware should be out in the next few days.

  TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

• I have my InDesign CS6 software crashes when the display of the Welcome screen.

  I have my InDesign CS6 software crashes when the display of the Welcome screen.

  Have you tried to restore your InDesign preferences?

  Garbage, replace, reset or restore the application's preferences

• Pre Bluetooth crashes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

  I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good.

  It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

  I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

  Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Defragmentation stops when the display is off

  I recently used the Disk Defragmenter to defragment my hard drive.  After reviewing the forums I discovered that it does not work when the computer goes to sleep so I took care of the mode "Eve".  However, my computer is always programmed to turn off the display after 10 minutes.  As the defragmentation. can take several hours, I didn't leave the screen while he was doing his job.  However, when I returned to the computer during the process and reactive the display, he did not know if the defragmentation. given market or extended.  I would not have thought that the display off should interrupt the defragmentation. but I would appreciate clarification on this point.

  Hello

  If the screen saver is on, Defrag will still work in the background.

  There is no need to do what you do.

  I think you should read this about Defrag in Vista and you don't have to do it manually.

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• Windows Explorer crashes when the click with the right button on folders

  My Windows Explorer crashes whenever I right click on a folder, any folder.  It is for me a "Windows Explorer has stopped working" then it gives me a warning 'Windows restarts.  Then he closes my Explorer window.  I tried many things to see if that would help and nothing has done so far.  Anyone has any suggestions on how to solve this problem or knows what could be the problem?

  Click right problems are very often caused by third-party programs adding entries in the context menu.  Here is a program that can help you manage these inscriptions: http://www.nirsoft.net/utils/shexview.html.  Here, another article written for XP, but it applies to Vista that may be useful: http://windowsxp.mvps.org/context_folders.htm.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Then the display turns off I can't get it back without force restart

  When the display switches off the power due to the low battery power & I can't get this back even when I plug it into the sector and having to force the computer to restart.
  Is there a pref somewhere to turn it off?

  Hello

  When the screen turns off, exactly? How much capacity has battery at the moment? 5 % ? More?
  Try to higher level.
  When you work with your laptop and the battery level is low battery and the alarm alert will appear in the taskbar, but you will be able to continue your work several minutes or connect the power running.

  I'm afraid that your laptop reaches the critical battery level and then maybe is too late for any action.
  Set the low battery level to 10% and when the notification is shown connect power adapter immediately.
  I imagine that the screen doesn't have to be out of all.

• Keep VI running when the display of pop-up window

  Hello

  I put a button in my program when I click on it and the meesage text appears.

  But when the window opens, the main VI will freeze until I click the OK button on the pop-up window.

  (in the example downloaded, click on the OK button, number will stop adding until I click the OK button on the pop-up window).

  Is it possible to keep the vi running when the display of the popup window?

  Thank you very much!

  Hello

  Hope this link will answer your question. You need develop your own pop up VI and launch dynamically from your main VI.

• Windows 8 crashes when left idle

  whenever I leave my phone off for 5-10 min it doesn't freeze no prgram works except the mouse, the mouse pointer may move only nothing IE right as left click doesnot work and I have to restart the computer. The problem started about 2-3 days ago and have completely frustrated me... if there is no solution would help me please

  Hi Salem,

  Welcome to the Microsoft Community and thanks for posting the question. I see that the computer of windows 8 crashes when it is idle. Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  To resolve this issue, let us try these methods:

  Method 1.

  You can try to run the electrical troubleshooting utility and check if it helps.

  a. press Windows key + R, type Control Panel and press ENTER.

  b. Select Troubleshooting.

  c. click system and security , and then select power.

  d. click Next to run the troubleshooter.

  Method 2.

  You can update the drivers and check if that helps.

  What happens if a device is not installed correctly? : http://windows.microsoft.com/en-US/windows-8/what-device-isn ' t-installed-correctly

  Method 3.

  To run the System File Checker, you'll need open an elevated command prompt. This can be done:

  • Enter the start screen
  • Press Windows + C keys on your keyboard to show the charms. (If you use a touch screen: touch the right edge of the screen and slide your finger to the center of the screen to display the bar of charms)
  • Click on search
  • Type the command prompt in the search field
  • Click with the right button on command prompt (if you use a touch screen: touch and hold your finger at the command prompt, drag your finger downwards until you see an outline around the tile and finally release your finger on the screen.)
  • Click on run as administrator

  Enter the command: sfc/scannow
  Note: If you use a touch screen you can open the touch keyboard for the command prompt by typing on the keyboard icon in your taskbar near the system tray.

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope the step preceding helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each

• Firefox crashes when the flash is used.

  Firefox crashes when the flash is used at all.
  I've checked everything and it is only with flash 10.1.53.64 on the tree

  == a site using flash is open

  I use Windows 7 and I have the same problem. When I went to 3.6.4, Firefox would be to lock up whenever I tried to play any flash video. I have tried several sites and it would lock up every time I have to close by the Task Manager. I've updated the Flash Player and even tried uninstalling and reinstalling, nothing could solve this problem.

  I read that they supposedly separated the plugins like flash in a separate procedure to keep firefox crash if flash does, but apparently they didn't do this right. I had to go back to Firefox 3.6.3 worm and flash works without any problem in this version. Seems that firefox must correct 3.6.4 since it seems he's messed up video flash for many users, if not most. It is useless if it can't play flash since almost all Web sites use this format!

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Popups annoying on second Manager when the display manager is running

  Hello

  I have a Dell U2414H monitor HDMI port and an old 17 "Sony SDM S73 secondary monitor on VGA connection.  When the display manager is running, I get a popup on the Sony monitor that says "auto" , then "ADC success" about every minute.

  The popup appears only if the display manager is running.

  I tried auto and manual modes in the display manager but still no problem.

  Any suggestions?

  • Packard Bell iMedia S2885 - Intel HD 4600 Graphics
  • Updates Windows automatic/8.1.
  • Display Manager 1.21.0.150.

  Thank you

  The Sony is likely to be a monitor pre-MCCS, that maps a read status command a VGA setting automatic function.

  I don't know if it will completely eliminate the problem, but if you're comfortable editing the Windows registry try to add the "SkipCIcheck" value to HKEY_CURRENT_USER\Software\EnTech\DDM and it 1 (dword). Then restart the display manager Dell and see if things have improved.