Windows 8 error Oxc0000225 ssd

I have a hp envy 15-j022el. I also bought a Samsung SSD 840 Evo to replace the internal hard drive 1 TB. I cloned the SSD HD with Aomei Partition Wizard 5.5 standard edition. Everything went well and the HD has been cloned to SSD. Then I replaced the hard drive with the ssd to the inside of the laptop, but once I turned on the PC I get the following error screen.

Recovery

Your PC needs to be repaired

A required device is not connected or is not accessible.

Error code: 0xc0000225

[A text saying I should use on my installation media recovery tools to fix the problem.]

Press Enter to try again

Press F8 for startup parameters

Press ESC for UEFI firmware settings

If I press enter or F8, the central part of the message becomes:

The application or the operating system could not be loaded because a required file is missing or contains errors.

File: \Windows\system32\winload.efi

Error code: 0xc0000225

HI Philippe,.

Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY 15-j022el Notebook and have problems with a new HARD drive. The mistake is to give is the clone that you made a mistake in the system. Unfortunately Windows recommend reinstalling a clean install.

Hope it will be useful.

Thank you.

Tags: Notebooks

Similar Questions

  • Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

    Hello

    After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

    I researched and found this fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

    However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

    I don't him have not yet tried this, because of the weather, but will plan no later than today:

    In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
    OK and restart.

    I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

    I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

    Anyone has any ideas, or did I miss something?

    Your help is appreciated!

    Thanks, Orrin

    I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

    To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

    Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

    Thank you

    Orrin

  • Windows update error 0xC1900101 8.1 0 x 30018.

    Original title: Windows update error 0xC1900101 8.1 0 x 30018... it's annoying please help.

    I know there are already a lot of posts on this subject and I have read some good but I still can't upgrade my desktop computer. Finding this very irritating that the update is now available for about 10 months and is still problematic, however I'm still hopeful. Now, my office is a house system, which I assume is part of the problem, but I'm going to go.

    My machine specifications are as follows:

    Motherboard ASUS sabertooth x 79
    CENTRAL PROCESSING UNIT Intel Core i7 - 3820

    RAM

    Corsair Vengeance 8 GB (2x4gb) (CMZ8GX3M2A1600C8)
    GFX card ASUS GTX650 TI boost 2 GB
    SSD Samsung 840PRO series 256GB
    HARD DRIVE Western Digital Black 1 TB
    POWER SUPPLY EVGA Supernova NEX750G
    Hard drive ASUS BW-12B1ST
    Keyboard Logitech G510
    Mouse Logitech G500

    Now, some posts I read that I met a lot of different answers. some variant of not enough power available from the power supply, others say it is probably just an accessory you attached. My last attempt to update, I uninstalled everything that wasn't on the list of compatible Windows 8.1 Upgrade Assistant of the report, and I mean everything that was not listed as well as things that were listed as being incompatible. Of course, I got to the stage where it became ready devices and failed at about 50% or more. The time at which its failed summer seems to be different, I remember some time ago an attempt he got to 90% and then failed. This is the final part of the latest update, maybe someone can help give a sense.

    25 2014-08-09:06:36:334 724 121C to THE > # RETURN # to THE: research updates [CallId = {665A2760-B10E-4185-BD84-9B0EF5D18F15} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    25-08-2014 09:06:36:334 724 121C at # 1 detected updates
    25-08-2014 09:06:36:334 724 121C TO THE #.
    2014-08-25 09:06:36:334 724 121C # end # in THE: research updates [CallId = {665A2760-B10E-4185-BD84-9B0EF5D18F15} ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}]
    25-08-2014 09:06:36:334 724 121C TO THE #.
    25-08-2014 09:06:36:334 724 121C to THE THE all searches all.
    25-08-2014 09:15:22:559 724 a50 report WARNING: CSerializationHelper: InitSerialize failed: 0 x 80070002

    Looking to get this sort so if anyone can help I would be grateful.

    Hello

    There could be several reasons for the 0xC1900101 - 30018 0 x error message. I suggest you try the steps suggested by Levon Levonian dated 17 October 2013 at the following link and see if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x30018-Microsoft-please-answer/aa0ea361-5ffc-4a43-98Cf-628491338e05

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • Windows update error 80072EFD

    Hello
    I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
    I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.

    I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.

    I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:

    Validation code: 0
    LegitCheckControl: N/a, hr = 0 x 80070002
    signed: n/a, hr = 0 x 80070002

    My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.

    I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.

    It seems funny how the same thing happens even after a clean drive toshiba recovery.

    Any suggestions?
    BL262000

    Hello

    If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
    It's typical Microsoft problem and the solution must be sought by Microsoft.
    Have you checked
    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f?

  • H8-1240ef - install Windows 7 on a SSD

    Hello

    I have a HPE h8-1240ef with a disk of 1 TB SATA III.

    I would like to add a 64 GB SSD SATAIII drive in order to install Windows 7 above, to increase performance.

    Given that we do not have the "Windows 7 installation CD" with the HP machine, I don't know how to install Windows 7 on the SSD drive and swap the bootable volume, for the SSD read in the C: drive.

    Thanks a lot for your help

    Hey Grboutin,

    You will need the recovery disks to restore the system. But you'll need a 160 GB SSD the minimum size to restore the system using the recovery discs.

    You can create on your PC recovery disks, simply type in the start menu in the recovery and Recovery Manager should appear. Follow the instructions to create the media recovery either on DVD or a USB - stick.

    Here is a link.

    http://support.HP.com/us-en/document/c01867124

    but - the key is - SSD JUST does not work, you MUST have a 160 GB or more to recover. Otherwise, you will need to purchase a retail version of windows.

    Good luck

    Bill

  • Windows Update error code

    I have a new Toshiba laptop, running Windows 7 (Home Premium SP1 installed by the OEM). My internet connection works fine for all sites Web except it fails when I try Windows Update. Error message code is 8024402F. I already checked 'automatically detect DNS settings' I also tried disabling my firewall (McAfee) temporarily and tried without solution. I tried dozens of times in recent days.

    Any suggestions on how to fix this?

    Hello

    According to the Microsoft Knowledge Base, it has something to do with your Internet connection. Have you already checked the Microsoft Knowledge Base?

    Microsoft recommends disabling the security software (antivirus and firewall) and try the troubleshooting Windows Update tool as described here:
    [Code error Windows Update 80244016, 8024402f, or c80003fa | http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80244016-8024402f-or-c80003fa]

  • Satellite L30: CFSServ "Windows Socket error.

    Hello

    Every time I try to go on internet, this warning sign appears (a yellow triangle with an exclamation mark inside) saying CFSServ "Windows socket error.
    It allows me to go on my internet (what is broadband) gave me solutions such as put the Windows XP CD in the CD drive and repair of each file, but the thing is, I never gave me a cd of Windows XP in the first place! As soon as I opened the box and set up the laptop, there is no CD of windows xp.
    (I'm typing this from my desktop computer) I wish that all solutions on how to get rid of this problem.

    Thanks to all who help.

    Post edited by: ringmaster164

    First you get a Toshiba Recovery CD and not an original Windows OS CD.
    In this case, if you want you can retrieve the whole OS. All Toshiba drivers are preinstalled on the image.

    Now to the error:
    cfsserv.exe is a process belonging to Toshiba ConfigFree utility and search wireless devices.
    However, malware often use the names of valid program to try to hide themselves. So, please run a full scan with Ad-Aware in making sure you have the latest definitions file.

    If it doesn t work I recommend the ConfigFree tool for some audit settings.

  • HP OfficeJet Pro 8610: Windows Update error 80070490

    I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

    Welcome to the HP Forums @ace8,

    I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

    Here are two documents that I found on the Microsoft website on errors:

    1. Windows Update, error 0 x 80070490
    2. Windows Update error 80070490

    If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

    Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!

    All the best,

  • Connection Manager HP stopped responding + Windows Installer Error 1719

    I am running Windows 7 (SP1) 64-bit operating systems.

    Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.

    HP Connection Manager v4.1.23.1 running.
    When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.

    I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.

    Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.

    Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

    ParryJM wrote:

    A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

    Then uninstalled HP connection Manager.

    Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

    What do you suggest I try next?

    The fact that HP Connection Manager is no longer installed, how this will affect my computer?

    The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

    HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

    If you are not in this group it is really useless.

    From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

  • Windows updates: error code 80040154

    No updates have been installed successfully in more than a month... What is the problem? Error code: 80040154... using Windows Vista basic

    * Title *.
    My Windows Vista Basic does not accept windows updates: error code 80040154. What is the problem?

    Alan,
    If you have not already opened him a pension case and you still get this error, here are a few things to try.
    Run these tools and see if one of them report errors that cannot be fixed:
    Disk error checking
    System File Checker  
    The system update tool

    If those who invent it own and you still have a problem you can run some virus\malware scan from another source and then your.  Take a look at these links because they have some great info on virus protection:
    Get rid of malware 
    Can I clean an already infected computer?   
    Windows Live OneCare Safety Scanner Windows 7\Vista

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a black and white 2 on windows installation error 7...

    I have a black and white 2 on windows installation error 7...

    things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

    guys what should I do... Please help me... I like this game very much

    I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...


    guys what should I do... pls help >< i="" love="" this="" game="" so="">

    If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

    Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

    There are a few things to try:

    1. find the Setup program you are running for the game and which run in XP compatibility mode.

    2 in case of failure too and then try to run it in XP Compat mode and as administrator.

    I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

     

  • Windows Update, error 80200010 # WindowsUpdate_dt000

    The message referenced above is the error in trying to fill three 3 important updates to my computer, I received.  Two 2 updates installed correctly and completely, however, one (1) does not.  In chicking on icon troubleshooting he, I will put this error message "WindowsUpdate_80200010" "WindowsUpdate_dt000"  What does this mean and how can I fix this error and get this update loaded on my computer.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80200010

    If Windows Update error 80200010 during updates, this means that the Background Intelligent Transfer Service (BITS), cannot access the Internet. This service is used to connect to the Windows website and download updates to your computer.

    To fix this problem, make sure that your computer is connected to the Internet and check for updates again. To easily see if you are connected to the Internet, point to the network icon in the notification area and wait until you can see the status of your connection. You will see the name of your network or the service to which you are connected and the type of connection you have. If you are on a company or home network, you should see the message access: Local and Internet.

    I figured Vista in this case.

    For info: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

    TaurArian [MVP] 2005-2010 - Update Services

  • 7 Windows Update error 80070103

    80070103, this error code appears after trying to install the update. Several attempts installation Gets the same error. Update includes nvidia display

    * original title - 80070103, this error code is displayed after trying to install the update. Several attempts installation Gets the same error. Update includes nvidia display *.

    Google is your friend.  A search on "windows update error 80070103" gets this success

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

    Colin Barnhorst Windows 7 Ultimate x 64 on DIY with 6 GB of ram.

  • Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

    I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

    This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

    Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

  • window update error 800F081F

    Solution how to fix the window update error 800F081F

    Did you by chance read this: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

    0x800F081F CBS_E_SOURCE_MISSING

    Run the SURT - Description of the update of the system for Windows Vista tool
    http://support.Microsoft.com/kb/947821

    I assumed that you are using "Vista".

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • Change security questions is impossible - shows no link for reset.

    IF you have forgotten the answers to your security questions, Apple Support explains that by clicking on the link "reset my security questions" is where you can begin to solve this problem, but... This reset link does not show, which makes available

  • Cannot open the database: TrueSuite Access Manager

    Whenever I try to record fingerprints in TrueSuite Access Manager, I get an error indicating that it was unable to open the database.

  • Resizing a picture of structure within a DLL using the memory manager

    Hi all I dug deep inside the rooms, but has failed to find a solution to my problem. I am building a dll, which made a few imageprocessing and must return an array of structures to labview, with a struct for each element of the image. Because I do no

  • Digital control system, using limits of entry of data with global variables

    Hello! I have a Subvi with several digital control sliders. These control framerate, the pixel clock and exposure of a camera and their change in max/min/increment whenever one of them is changed - they are interdependent and get their information fr

  • hard drive keeps running

    After cleaning the virus on my desktop pc, I installed windows xp service Pack 3. During the installation process, it was a part near the end where he cleanes, it's self. It ran for more than 4 hours but no progress what so ever. I stop and restarted