Windows 8 freezes during or just after the start

Hello

I have a machine to window 8 which has been upgraded to windows 7 and worked perfectly well for several months until last week. It started to freeze during or just after the start in a minute or two.  It works fine in safe mode

  • I tried a lot of things already that is disable all non-Microsoft services, and that did not help.
  • Refresh the PC while keeping the files and settings and who also did not help.
  • Tried sfc/scannow, which did not help
  • Virus search

Restarted a few times OS and said, I met dpc_watchdog_violation. But no other information.

Advise the pl

Hello

I don't know any list of the differences between starting and Normal. I think you can try to disable Microsoft Services in MSConfig, but it's just a guess.

There is a box to check in MSConfig to create a log, but I know nothing about it, or where it would be stored.

If everything worked at some point, there must be an update of a certain type involved...

I suggest that you try to post the question to the TechNet Forum... Anyone know of this problem...

http://social.technet.Microsoft.com/forums/en-us/w8itproperf/threads

Tags: Windows

Similar Questions

  • Having a problem with Windows Live Mail lock up shortly after the start.

    Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

    I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

  • Problems with InDesign CC 2015 and El Capitan DP7? With DP6 is was awesome, with DP7 crashes just after the start.

    Hello!

    Updated El Capitan DP7 this morning and InDesign crashes just after the start. (With DP6 is was great)!

    Any comment/suggestion/help?

    Process: Adobe InDesign CC 2015 [1409]

    Path: / Applications/Adobe InDesign 2015/Adobe InDesign 2015.app/Contents/MacOS/Adobe InDesign 2015 CC CC CC

    ID: com.adobe.InDesign

    Version: 11.1.0.122 (11100)

    Code type: X 86-64 (Native)

    Parent process:? [1]

    Responsible for: Adobe InDesign CC 2015 [1409]

    User ID: 501

    Date/time: 18:32:41.676 2015-08-21 + 0200

    OS version: Mac OS X 10.11 (15A263e)

    Report Version: 11

    Anonymous UUID: 0061129A-F597-5AFB-7DF4-CF3E3B3FDDA2

    Time since started awake: 5800 seconds

    Crashed thread: 0 dispatch queue: com.apple.main - wire

    Exception type: EXC_BAD_ACCESS (SIGSEGV)

    Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000040

    Note the exception: EXC_CORPSE_NOTIFY

    VM regions near 0x40:

    ->

    000000010aff9000-000000010affe000 [20 K] __TEXT r-x/rwx SM = COW/Applications/Adobe InDesign CC 2015 / Adobe InDesign CC 2015.app/Contents/MacOS/Adobe InDesign CC 2015

    Global tracking buffer (second chronological reverse):

    3.729044 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb494e71f80 SSL Handshake Conn MADE

    3.975525 SSL handshake at the start of CFNetwork 0x00007fff8b5b9977 TCP Conn 0x7fb494e71f80

    3.975626 all 0x00007fff8b5b821f TCP Conn 0x7fb494e71f80 CFNetwork. FD: 60, err: 0

    3.976001 event TCP Conn 0x7fb494e71f80 CFNetwork 0x00007fff8b5b77d1 1. Err: 0

    4.138228 CFNetwork TCP Conn 0x7fb494e71f80 0x00007fff8b5b6faf started

    9.259148 CFNetwork 0x00007fff8b5b9a9b TCP 0x7fb48d5d0f00 SSL Handshake Conn MADE

    This fixed it for me:


    Solved: Disabled the auto-hide the menu bar.


    InDesign crashing on the opening (using the beta OS El Capitan 10.11)

  • Illustrator trial CC crashes just after the start

    Greetings,

    For school I have to use Illustrator so I installed the trial, but everytime I run the program it closes just immediately once it is open. No error message what-so-ever. Just, it opens and closes.

    It was installed on a clean pc, just bought myself a new pc. I tried many things such as:

    -Reinstall

    -updates of pilot (who were already up to date)

    -take a break from my anti-virus

    -internet disableing

    -disableing my graphics adapter

    -put an additional file as one of the internet solutions proposed on this one.

    -J' lived almost every solution I could find on the net.

    I'm working on a Windows 8.1 with a GTX880M graphics card. And all the other Adobe products, I've tried work: Photoshop and first

    Does anyone have a clue as to what to do? Or if I can somehow connect a mistake?

    Kind regards

    There was one thing that I did not try, for those still getting this problem: 'go to 'C:\ProgramData\Adobe\SLStore'. Note that "C:\ProgramData" is hidden, you should see and exploit the hidden files. Move the SLStore and SLCache folders to another location. If you believe that there is no problem, you can delete the files that you moved. »

    quote from: Illustrator cc 2014 the trial goes down right after the launch

  • Satellite A100-220 - she goes to zero just after the start

    Hello

    someone gave me this laptop reinstall its system and it used to work

    but now he is repeatedly to restart after you turn on - just after a few seconds it is restarting again. You can hear hard disk starts to spin, keyboard LED flashes once, display is still off however. And then restarted once more. He tries it 5 or 6 times and then turns off.

    I don't know what it is. I checked the memory. Is there a somewhere cmos battery on the motherboard to reset the BIOS? Any ideas what I could do and how much it would cost? As it's not mine I feel a little more troubled now.

    I thank in advance
    Oliniusz

    Hello

    Please power laptop, and then press F8.
    Then you should be able to start in safe mode.
    Check this box if this is possible

    If this is not possible, try to reinstall the new OS.
    Before you perform this default in the BIOS.

    In order to enter the BIOS, press F2 while turning on the laptop.

  • Why elements 14.0 crash without error message just after the start?

    Hello

    I use Photoshop elements on Windows 10 14.0.

    It worked well until two weeks or more.

    What is happening now:

    (1) I have the program launcher

    (2) I see the Welcome screen, I chose organizing

    (3) I see the splash screen for Organizer,

    (4) I can't see the launch of organizing,

    (5) just at the time when organizing screen finalise to appear, he disappears without error message.

    When I look in the Task Manager, I see an organizing process that is inactive. Sometimes if I wait, I managed to get to open correctly, but more often than otherwise.

    I tried to open it with the administrator, the same rights.

    I tried to reinstall twice, once with the removal of the preferences and it doesn't change anything.

    Someone has an idea?

    This could be due to the fact that I have installed Premiere Elements as well?

    Thanks in advance for your help and ideas.

    See you soon

    Please try the instructions mentioned in the article:

    Elements Organizer crashes at launch

    Thank you

    Blandine

  • Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

    After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

    What can I do to fix this?

    It's a site file

    Hi Jose7777777,

    • What version of Windows are you using?
    • How long have you been faced with this problem?
    • Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also view the startup folder.

    I hope this helps.

  • Windows xp locks just after the start

    It just started last night and today I got a call from someone calling themselves repair windows (come call of the India) and they state they know bad files have been downloaded on my PC one it needs repair - someone else has had this or know how I can stop what's happening, it starts and then once I got to the main screen of windows the pc just crashes.

    If you can not connect mode without fail, your next logical step would be to try the Recovery Console.  Once in the recovery console, you can try to perform a disk check where the problem is caused by a problem on your drive.  You must type a command like:
    CHKDSK C: /R

    "How to install and use the Recovery Console in Windows XP"
      <>http://support.Microsoft.com/kb/307654 >

    If this does not work, you can try to replace your registry to a backup files.  The best way to proceed is to boot from a bootable CD (I like to use floppies for Linux Live free like Knoppix, but there are other CD based on Windows, you can create such as Bart PE, UBCD4Winand Hirens ) then follow the General steps of KB307545 from part 2, step 6, using the interface graph normal user on your boot CD to move and copy files rather than the instructions of line of order in the article.

    Otherwise, you can use one of the above CD boot (or your install in another computer disc) to back up what files you can on a USB hard drive before reinstalling Windows.

    HTH,
    JW

  • Lenovo Ideapad Y560 very slow just after the start

    Hello!

    I have a weird problem with my laptop Ideapad Y560 (2 years). I was wondering if any of you have a similar problem and looking for a possible solution.

    As soon as I start the laptop (either), it is very slow for the first 3-4 minutes. Nothing to really works or opens, it hangs for a while and runs my entries of keyboard and mouse with a considerable delay. After this period of 3-4 minutes, it works perfectly fine, also responds well/crisp as the lappy was brand new. I can't understand why he behaves in this way.

    I almost never stop the laptop and generally just put it to sleep. However, I have this problem (as described above) if I turn on the lappy a stop or a State of sleep also. Anyone seen this before? Could someone please suggest possible solutions? Any help is very appreciated! Thank you!

    lprassanth wrote:

    Thank you. I did it twice and I got a message that he "did not for any breach of integrity" at every opportunity. Restarting the machine. Problem persists.

    Try the manual cleaning of Windows and then follow-up with defrag.

  • Essbase 11.1.1.3 Server was stopped just after the start

    Hi experts,

    I have an Essbase server runs for years, 11.1.1.3 version.

    The sharing of hyperion and EAS service has been installed on a server (let's say, the server) and Essbase was on another (say Server B).

    Normally, I start the service essbase directly by the registered windows service starts (after HSS and EAS all started a server A).

    Last night the server crashed for an unknown reason and I can't start service Essbase successfully, the symptom is:

    After that I started the 'Hyperion Essbase Service' of the windows service console, the status showed "started."

    but after a few seconds, the word "Started" disappeared (which means the service stopped) after that I pressed F5 to refresh.

    I checked ESSBASE.log but there is no paper relating to this topic, everything seems fine.

    Can someone provide suggestions? Thank you.

    If none of the Essbase associated newspapers have errors in them and the Essbase process breaks down, if there is absolutely no error then I would probably look to the restoration of the Essbase.sec to until the accident occurred.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • Skype crashes just after the start

    As of today, I suddenly have problems with my Skype program. Once I open the program and connect to my Skype account crashes. I tried to find solutions, but there is very little to find on the subject.

    I run Skype on windows 8.1

    This is the error log:

    Problem event name: APPCRASH
    Application name: Skype.exe
    Application version: 7.0.0.102
    Application timestamp: 54897add
    Fault Module name: winDCE32.dll
    Fault Module Version: 0.0.0.0
    Timestamp of Module error: 4227bfd4
    Exception code: c0000005
    Exception offset: 00002348
    OS version: 6.3.9600.2.0.0.768.101
    Locale ID: 2057
    Information additional 1:5861
    More information 2: 5861822e1919d7c014bbb064c64908b2
    3 more information: d1d9
    Additional information 4: d1d94a13d3609d6b740644c12508f581

    I hope some of you can help out me.

    Kind regards.

    Hello guys, I have solved the problem I've had with windows update.
    Thanks for the comments however!

  • OEM crashes just after the start

    Hello

    I was reinstalling 11.1.0.7 from scratch on a x 86-64-CentOS 5.3 system:
    -Install 11.1.0.6
    - Patch 6890831 : 11g Release 1 (11.1.0.7) Patch Set 1 for Linux x 86-64
    - Patch 7486407 : OLAP one 11.1.0.7 PATCH FOR
    - Patch 8290478 : Update Review April 2009

    The DB works fine, however the OEM crashes after a few seconds. I tried to reinstall the reposistory:
    # emca -deconfig dbcontrol db -repos drop
    # emca -config dbcontrol db -repos create
    ... blah blah ...
    Do you wish to continue? [yes(Y)/no(N)]: y
    Apr 30, 2009 2:03:28 AM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /opt/oracle/cfgtoollogs/emca/csi/emca_2009_04_30_02_02_40.lo                                                          g.
    Apr 30, 2009 2:03:29 AM oracle.sysman.emcp.EMReposConfig createRepository
    INFO: Creating the EM repository (this may take a while) ...
    Apr 30, 2009 2:08:14 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Repository successfully created
    Apr 30, 2009 2:08:22 AM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
    INFO: Uploading configuration data to EM repository (this may take a while) ...
    Apr 30, 2009 2:09:36 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Uploaded configuration data successfully
    Apr 30, 2009 2:09:38 AM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
    INFO: Software library configured successfully.
    Apr 30, 2009 2:09:38 AM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
    INFO: Deploying Provisioning archives ...
    Apr 30, 2009 2:10:03 AM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
    INFO: Provisioning archives deployed successfully.
    Apr 30, 2009 2:10:03 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
    INFO: Securing Database Control (this may take a while) ...
    Apr 30, 2009 2:10:27 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
    INFO: Database Control secured successfully.
    Apr 30, 2009 2:10:27 AM oracle.sysman.emcp.util.DBControlUtil startOMS
    INFO: Starting Database Control (this may take a while) ...
    Apr 30, 2009 2:13:33 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: Database Control started successfully
    Apr 30, 2009 2:13:33 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
    INFO: >>>>>>>>>>> The Database Control URL is https://csipe:5500/em <<<<<<<<<<<
    Apr 30, 2009 2:13:56 AM oracle.sysman.emcp.EMDBPostConfig invoke
    Enterprise Manager configuration completed successfully
    FINISHED EMCA at Apr 30, 2009 2:13:56 AM
    EM agent seems to think everything is ok:
    # emctl status agent
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
    Copyright (c) 1996, 2008 Oracle Corporation.  All rights reserved.
    ---------------------------------------------------------------
    Agent Version     : 10.2.0.4.0
    OMS Version       : 10.2.0.4.0
    Protocol Version  : 10.2.0.4.0
    Agent Home        : /opt/oracle/db11g/csipe_csi
    Agent binaries    : /opt/oracle/db11g
    Agent Process ID  : 17226
    Parent Process ID : 17173
    Agent URL         : https://csipe:3938/emd/main
    Repository URL    : https://csipe:5500/em/upload/
    Started at        : 2009-04-30 02:10:29
    Started by user   : oracle
    Last Reload       : 2009-04-30 02:10:29
    Last successful upload                       : (none)
    Last attempted upload                        : (none)
    Total Megabytes of XML files uploaded so far :     0.00
    Number of XML files pending upload           :       62
    Size of XML files pending upload(MB)         :     8.36
    Available disk space on upload filesystem    :    89.84%
    Data channel upload directory                : /opt/oracle/db11g/csipe_csi/sysman/recv
    Last attempted heartbeat to OMS              : 2009-04-30 02:38:04
    Last successful heartbeat to OMS             : 2009-04-30 02:11:19
    ---------------------------------------------------------------
    However, dbconsole broke down, and I got the following errors in the log files (btw iptables and selinux is disabled):

    In emagent.trc:
    2009-04-30 02:10:29,281 Thread-1168533360 WARN  http: snmehl_connect: connect failed to (csipe:5500): Connection refused (error = 111)
    2009-04-30 02:10:29,281 Thread-1168533360 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://csipe:5500/em/upload/: retStatus=-32
    In emdctl.trc:
    2009-04-30 02:10:13,572 Thread-4105176992 WARN  http: snmehl_connect: connect failed to (csipe:3938): Connection refused (error = 111)
    2009-04-30 02:10:13,573 Thread-4105176992 ERROR main: nmectla_agentctl: Error connecting to http://csipe:3938/emd/main. Returning status code 1
    2009-04-30 02:10:32,637 Thread-2027689888 WARN  http: snmehl_connect: connect failed to (csipe:5500): Connection refused (error = 111)
    2009-04-30 02:10:34,676 Thread-29771680 WARN  http: snmehl_connect: connect failed to (csipe:5500): Connection refused (error = 111)
    In emoms.log:
    2009-04-30 02:10:55,986 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.sidb.ui.intg.SIDBP
    rovisioningIntegration
    2009-04-30 02:10:56,149 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.racprov.ui.intg.RA
    CProvIntegration
    2009-04-30 02:10:56,150 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendC
    lusterIntegration
    2009-04-30 02:10:56,151 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNode
    Integration
    2009-04-30 02:10:56,152 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.common.ui.intg.Pro
    vCommonIntegration
    2009-04-30 02:10:56,153 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.bpelprov.ui.intg.B
    PELProvisioningIntegration
    2009-04-30 02:10:58,741 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.emCLI.CLIIntg
    2009-04-30 02:10:58,742 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.emCLI.CLIDownloadIntg
    2009-04-30 02:10:59,753 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.eml.target.slb.common
    .SLBIntegration
    2009-04-30 02:11:00,585 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.paf.sample.ui.intg
    .PAFDemoIntegration
    2009-04-30 02:11:00,586 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.422 - Integration Class not found: oracle.sysman.pp.asprov.ui.intg.ASP
    rovisioningIntegration
    2009-04-30 02:11:11,168 [PAFDaemon] WARN  jdbc.ConnectionCache _getConnection.352 - Io exception: Socket read timed out
    java.sql.SQLException: Io exception: Socket read timed out
            at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:77)
    In the alert.log, much of:
    Fatal NI connect error 12537, connecting to:
     (LOCAL=NO)
    
      VERSION INFORMATION:
            TNS for Linux: Version 11.1.0.7.0 - Production
            Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
            TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
      Time: 30-APR-2009 02:15:17
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12537
    
    TNS-12537: TNS:connection closed
        ns secondary err code: 12560
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    ORA-609 : opiodr aborting process unknown ospid (18649_47289593456608)
    I found nothing like it anywhere on the net. Anyone here have an idea? It's driving me crazy, please help if you can!

    Thank you
    Chris

    Hi Chris

    Have you read the following note in Metalink?
    DOC - ID: 555609.1
    Subject: Troubleshooting ORA-12537 / TNS-12537 TNS:connection closed

    Otherwise the DBSNMP password wrong?

    DOC - ID: 388562.1
    Subject: Dbconsole 10.1.0.3 unable to connect to the database

    Your listener is operational and you have no problem with a firewall?

    lsnrctl status

    DOC - ID: 430200.1
    Subject: EM get Core Dumps and EMAgent is stolen

    DOC - ID: 343295.1
    Topic: From 10gr 2 TNS Listener gives TNS-12541, Linux error: 111: connection refused

    hope that these notes will help you, if not ask for more.

    Thank you-

  • Vista goes into sleep mode automatically just after the restart

    The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

    Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

    The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

    Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

    It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

    I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

    It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

    Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

    Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

    After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

  • RESPONSE VERY SLOW AFTER THE START-UP OF THE PC.

    My PC has become very slow. When I start my all right, but
    When the desktop I have to wait at least 7-8 minutes before updating it the first time.
    If I don't wait and refresh it just after the start and then very slow after clicking answers, then after
    sometime, windows Explorer stops working and I have to restart my PC.

    I don't know why this problem is ancestral. I thought before formatting my PC and heal
    I ask you all if you have any solution.

    I tried all possible measures such as:-1. using the system configuration to stop unnecessary programs from startup.
    2 using the Disk Defragmenter.
    3 using CCleaner to remove all files of PC unnecccessary.
    4 using the KASPERSKY INTERNET SECURITY 13, I scanned and found 0 THREATS.

    I have 320 hard drive with two local drives: 1. (c) 17.5 GB free 99.9 GB;
    2 (D :)) 27.4 free GB of 198 GB.)

    System information: -.

    -------------------------------------------------------------------------------------------------------------------------
    Operating system: Windows 7 Home Basic 32-bit (6.1, Build 7601) Service Pack 1
    Manufacturer: Gigabyte Technology Co., Ltd..
    System model: G41M-ES2L
    Processor: Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz (2 CPUs), ~2.9GHz
    Memory: 2048 MB RAM
    Available OS memory: 1916MB RAM
    Page file: 1385MB used, 2447 MB of available space
    DirectX version: DirectX 11.

    Please HELP me ON THE above of PROBLEM as SOON AS POSSIBLE! I have!

    Thank you...

    Yuvraj

    This Jetta post may be of interest:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-make-Windows-7-32bit-into-64bit-with/5b4581fc-2e68-49A0-a529-28257d00e069#LastReply

  • Cannot logon after the start because just passing simple / 8.1 Windows logon is not displayed

    It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.

    I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.

    What alternative should I solve the problem?

    Find a possible solution:

    -Press ESC to HP connection icon

    -Choose F11 and follow the instructions to start Windows in safe mode

    You can then use the system restore to solve the problem.

Maybe you are looking for

  • Need Vista driver for a USB-SERIAL converter

    I tried to plug in the USB-TO-Serial but it seems that there is a problem with the driver I bought the USB-TO-Serial converter without Vista driver. Could you please tell me to do? Kind [email protected] FM

  • Are telephone scam/sales calls these calls?

    calls from 07921487987. What Googles as a number of Chinese based - I do not answer, it is & called a number similar scam/sales? [Original title: moggysenior]

  • Add a dns XP entry require a restart to take effect?

    I added a new DNS entry and I was wondering if you need to reboot XP before it takes effect?

  • Frequent sounds of 'buzz'

    My wife has a laptop Dell Inspiron N4110 with SRS Premium SOund technology.   Recently, he began to make frequent short 'buzz' sounds (one every 2 minutes) because she is listening to SAIAB. AC. ZA, PBS.ORG, Pandora.com and Hulu.com.  It happens when

  • Witch problem Anyconnect - computer reading certificate

    Hello world. We are experiencing a problem with our computer Windows 8.1 domain and Anyconnect.We have deployed computer certificates on all computers in our area and use them for our wireless networks, which works very well. Anyconnect at startup as