Windows 8 is desconecta ethernet rising

Similar Questions

• Inspiron 5000 15 stall since the Windows 10 upgrade series ethernet connection

  I have a Dell Inspiron 15, 5000 series that accompanies Windows 8.1 on it. I have upgraded to Windows 10 and the ethernet connection began to stall, giving messages that the cable is not connected when it is. I had installed all the updates driver from the Dell site, including all the firmware and the BIOS updated. According to the Dell website, the laptop has reportedly been tested to work with Windows 10.

  I've disabled the card, then raise it, but always without success. I tried to roll back to Windows 8.1 and the ethernet of the functions of connection very well. I tried the upgrade of Windows 10 once again, but the ethernet connection does not work even after reinstalling all the drivers for Dell. Is it possible to know if this model is simply not able to upgrade despite the affirmation of Dell is it?

  In fact, I found the answer this morning. I had to downgrade the driver for the Realtek PCIe FE Family Controller at 9.1.402.2015. So far, everything looking good. I have access to the internet via the ethernet cable. Go to let it run a bit and make sure that it is stable. I guess it was unhappy with the latest driver.

• Satellite A100 PSAA5A Windows does not recognize ethernet controller

  Hello

  I'm having a problem with a PSAA5A-01H00T A100 running Win XP sp2.
  Windows does not recognize an ethernet controller, so the wireless NETWORK card does not work, even if the wired connection is.
  I tried to install the latest WLAN drivers on the support site (two of them), does not. Windows insists that the correct drivers are not installed.

  I suspect a hardware problem and I have the user on an external wireless NETWORK card, but I would appreciate any idea that you guys can provide.

  Thank you.

  Hi mate

  What Ethernet controller is not recognized? WLan or LAN?
  You have a few unknown devices in Device Manager?
  If so, then a critical driver is missing, and so the controller is not recognized correctly.

  You n t know what LAN or Wlan chip you have and what driver is needed?
  Check this box:

  How to identify an unknown device (e.g. LAN wireless module)?
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• How to connect a portable laptop Windows 8 with Windows 7 computer via Ethernet cable and transfer the data directly?

  I have a laptop Windows 8 . I want to connect to a new round of windows 7 and transfer the data at least 8 MB/s.

  Please send me the procedure to follow. I don't want to share Internet, but want to transfer data.

  You can do this, but you need a special type of Ethernet cable called a crossover cable.  This means the son in the swap position cables so that "send" and "receive" the computer two plugs can communicate.

  Learn more here: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7

• 10 Windows post install MIA ethernet controller

  Downloaded Windows 10

  Ethernet port died

  Wireless only works

  tried to update driver received this message "realtek network controller not found, if sleep deep mose is on please the positive cable.

  Device Manager > network adapters > shows only the RTL8188EE wireless adapter > properties > power mgmnt > unchecked allow the computer to turn off this device to save power > restart > No ethernet

  clean the re - install windows 10

  no change

  Windows C > Realtek > drivers > NO CONTROLLER FOUND > PCIE wireless LAN > update driver > no change

  site Web de Realtek > research > realtek network controller > downloaded 2nd from the bottom by search on this forum > no change

  http://www.Realtek.com.tw/downloads/downloadsView. aspx? LangId = 1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownT...

  where guys now?

  Hello @R_F_D,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages
  this message has instructions.

  Good luck!

• HP ENVY 17-j013cl Windows 7 64-bit Ethernet controller driver

  First of all, I must say that I am happy that this place exists!  It relieved a lot of the effort to downgrade to Windows 8 for Windows 7.

  OK, here's the problem.  I have an HP Envy 17-j013cl laptop and I recently switched to 64-bit Windows.  This forum has been a great help to find all my drivers (I am happy of my USB ports work yet!) except this one... Ethernet controller:

  ID devices listed for Ethernet controller:

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1969103C & REV_0C

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1969103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Your help is greatly appreciated and I look forward to your responses.

  Thank you.

  Dan

  Hello

  Try the RealteK LAN driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64968.exe

  Kind regards

  DP - K

• Driver installation after Windows XP Edition reloading ethernet family

  Hello

  I had to reload windows XP Home Edition and the associated drivers. However, after installation I am unable to access the internet because the associated with the ethernet card drivers have not been installed. It seems they don't come standard with the installation CD. Where can I download these and are there resources available to help my install so I can use my internet?
  Thank you

  You need to right click on my computer and select manage. Then click on Device Manager. Telll marks us which devices have question next to them.

  Once you know those needing drivers installed, you can use either your driver CD or the drivers from Dell web site. If you need additional assistance, it would be best to post on the support forum for the Dell users.

• Downgrade from Windows 7 - driver interface (ethernet) NETWORK does not!

  I bought the HP Envy 15-j030us portable and QUICKLY retired the suicidal call error Microsoft Windows 8.  Everything is ok except my ethernet driver HP does not work.

  The driver has been installed but there is a problem of access to materials or loading the driver, idk.

  In Device Manager, it is recognized as a Realtek NIC but does not correctly install the software.  When it is plugged in, two activity lights are flashing but there is no evidence of a network.  The taskbar displays only the ORANGE icon wifi available.

  I am quite frustrated to Macrosoft to put me there already, can someone please help?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5395205&LC=en&cc=us&DLC=en&lang=en&cc=us

  Hello:

  You should be able to use all of the drivers W7 64 bit of this professional HP laptop except the audio.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4058%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If for any reason the realtek LAN driver does not work since the link above, you can get it directly from realtek to l'adresse--deuxieme file on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Make sure you install the Intel Chipset Installation Utility driver first before moving on if you have not already done so.

• Windows 7, problem driver ethernet... seriously need help!

  Hi my names chris

  & My problem is that Windows 7 will not update my drivers ethernet and coprocessor. I do not have the cd that came with the office, and I don't know the name of the ethernet inbuild manufacturer. so I can't find the driver.

  It is a packard bell and I can get my drivers from there Web site, but when I type my serial number it won't show me my drivers.

  the reason why I need this sorting is my office using a belkin Wireless G PCI card and I can not use cable because it iw away from the modem, please someone can help me because this has prevented my college courses as a brick wall.

  Thank you very much

  Chris

  Go to the Control Panel Device Manager. Find the ethernet card in the list of network adapters. Expand the list and the right mouse click on the name. The ethernet card manufacturer gains the properties. Download the drivers from their website.

  Tom

• No Internet! Windows 7 Realtek PCIE Ethernet (CODE 10) "device cannot start?

  I have no internet connection at all. I desperately need help. I read a lot of questions on the subject up a network and running and general network issues, but none have been equalled my question. I seem to have a "Code 10" error saying that my ethernet controller "device cannot start." I'll force the uninstall and let windows reinstall them, and they do not. I have uninstall/install the force and they fail. Disable/re-inabling does not work. The RJ45 port only flashes every now and then 6 times in a row in an orange color. I don't know what to do. I am running windows 7 hp 64 bit. I have not had this problem before, and the internet worked on this machine. It seems that I booted up once and I had this problem since. I'm wired to the rear of the at & t linksys router so I don't know why it does not recognize the connection. When I leave the system to diagnose the problem, it says "RTL 8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) knows driver or hardware related issues.»

  Thanks in advance for the help.

  Hi, I had simiar issues mentioned in my post above, everythying was working fine one day, then the day I started the PC and had no ethernet... I tried to do a CLR CMOS to try to reset the BIOS where he had gotten corrupted, it has not helped.

  However I havee been downloaded the file most recent BIOS my mobo manufacturer and cela flashed to the computer and it restored my connection to the local network.

  I hope this can be useful for you.

• Windows by default for ethernet connection

  I am running Windows 7.  Until recently, I've linked to my router wireless via an ethernet cable, but the installation of a new router means that I must now rely on wireless.  When I turn on my PC, it does not detect the wireless signal, but if I reboot, it finds.  It is a coherent, not intermittent problem, and the "solution" works every time.  I tried to change the order in which Windows finds links to the router and must first free wireless.  Still not good.  Has anyone else out there encountered this problem or (especially) found a solution?  Richard

  Not sure if this will help... but worth providing the autoconfiguration WLAN service is set to "automatic."

• Unable to connect to the games for windows live to activate dead rising 2

  Games for Windows Live, Activation of the Production and Dead Rising 2

  Hello

  I have a problem with the activation of a product through Games for Windows Live. It is that my computer is unable to connect to Games for Windows Live via the internet even if my computer is connected to the internet. The product needs to connect to Games for Windows Live for him were allowed to be used. A username of Games for Windows Live and the password is not necessary according to the product. The first obvious solution was to turn off my firewall, restarted and the connection attempt. Unfortunately, she didn't and I don't no how to best continue. I contacted customer support and has been achieved here.
  If possible could you please give me some advice on how to connect?
  Thank you.
  Mark

  Hi Mark,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if the problem still persists.

  Games for Windows LIVE: solving problems

  http://support.Microsoft.com/kb/977709

   

  Method 2: If the method above does not help, then you can read the following article and check.

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  http://support.Microsoft.com/kb/938705

  You can also view the article mentioned for more information below:

  Games for Windows - LIVE: how to create a LIVE account

  http://support.Microsoft.com/kb/937066

  Let us know if that helps.

• installation of Windows 7 driver of ethernet controller error

  I got windows 7 pro, then I installed windows 7 Home premium, but when I installed it, it installed all the drivers except ethernet controller device, I looked for the driver online, but I have not found, can anyone help me

  Go to the manufacturer of your computer support, Web site, they should have the drivers you need.  Because you don't give us no details to go we can tell you what their website is, or how access to the drivers.

• Windows 8 network error: "Ethernet is not a valid ip configuration.

  I've updated from Windows 7 to Windows 8 a few months ago. Since I've updated, sometimes my internet does not work. On troubleshooting, it says "Ethernet is not a valid ip configuration. And sometimes, also said "the default gateway is not available". Sometimes he gives two errors. I use a LAN cable. When I plug the cable even in my other pc with Windows 7 installed, it works perfectly. It has been also works very well on the same pc before installing windows 8. And when this problem occurs, I can't go to my router by cable configuration by going to "192.168.1.1". I used the command ipconfig / renew and ipconfig enough orders, but the problem is not in trouble. The Internet to another pc on the same router works while mine does not. So please help me with this.

  Hello

  http://www.TomsHardware.com/answers/ID-1626374/Ethernet-valid-configuration.html

  http://answers.Yahoo.com/question/index?QID=20130424164730AAcNIgE

  http://www.askives.com/Windows-8-Ethernet-doesn

  http://www.windowsbbs.com/networking-hardware-software/105019-Ethernet-doesn ' t-have-valid-ip - configuration.html

• Unidentified (on Windows 8 connected by Ethernet to Windows 7) wifi-connected shared network

  Hello

  My PC W8 was connected by ethernet to my W7 laptop computer, which is connected by wifi. (Because I don't get my pci wifi card).

  The connection was very good, no problem. But since this morning, my W8 lost the connection, and I have the following message "unidentified network / limited. Moreover, when I use Windows Network Diagnostics it tells me "Ethernet is not a valid IP configuration.

  I tried to restart the PC, Router 2, but nothing.

  Thanks for your help

  I filled the ethernet connection with the wireless, and it works.

  Now, I have internet.

  That's what I did: https://www.youtube.com/watch?v=8z3V8LJIy8g