Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

Similar Questions

• restarted the computer and can not get on the internet, how can I find the driver?

  I had to reload Windows XP Professional on my PC and now it doesn't let me go on the internet when I'm trying to find the command IPCOnfig it doesn't have one, but I have an internet connection with my laptop.  I have a 2002 Dell more aged, but used all the time to internet before.

  You can go where ever you are and put it on CD/DVD/key USB?
   
  Here is the link:
  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=DIM_P4_4600&OS=WW1&OSL=en&CATID=&impid=
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to wireless networks more. ("Windows could not connect to (SSID)")

  Hello!

  Something very strange is happening with my laptop (dv6-3060ee). Up to this day at noon, everything worked well, including the wireless network. So, I set my computer to Hibernate and came to the House of my parents. As I turn it on and try to connect to the wireless here, I can't. I get this error "Windows could not connect to (name of the network).

  I'm on W7 Home Premium 64-bit and the card wireless in an Atheros 9285 b/g/n (model number can be a problem, I have it does not properly check).

  Things to consider:

  -I don't know that this is not a router problem or hardware WiFi card because:

  1. I can connect to the router and get internet access on my phone and with the other computer normally.

  2. on the laptop, I can not connect to the network without wire inside W7, BUT with HP QuickWeb (this system of Opertaing before loading windows), I can normally connect to the network and access to internet.

  -Have you ever tried, without success:

  1 reinstall the driver for the wireless card / Unistalling the driver and install it again

  2. change the encryption on the router. (Even with no encryption I can't connect)

  3. of course, restarting the computer, turn off/on of the network card, reset the router

  So, I'm sure it's a problem with Windows. I did some research here and in other places and other people seem to have the same problem, but I couldn't find any solution.

  I didn't install any software today which could cause conflicts.

  So, can someone help me, please?

  Thank you

  Thank you for your help, but I'd already sorted.

  The problem was really the driver, an update had been installed by the HP update program and it makes the device stop working. This problematic driver was March, I can't remember the version number.

  I went to the Device Manager and pressed on "Roll Back Driver". Windows restored to an October/2009 driver, 8.0.0.238 version number, and now it works as it should.

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows could not automatically detects the network proxy settings

  Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

  (This message is intended for all problem reports)

  Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

  Search for malware, especially using malwarebytes.

  Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

  netsh winsock reset
  netsh int ipv4 reset

  If they do not help, please after the output of a command ipconfig/all-order

• Windows could not automatically bind the Protocol IP on the network card stack.

  Hello

  I installed an Edimax EW-7718Un network adapter that does not connect to the internet. I installed the same device on my Windows Vista laptop and it works fine, this isn't a problem with the product or my BT Home Hub. I checked the Edimax website and this product is compatible with Windows 7, and I have the latest drivers for it. I did the following to try to resolve the problem:
  -I've already been on the adapter properties, and clicked on "update drivers", the system says that the network card is working properly and that the drivers are up to date. I also installed the latest drivers on the Edimax website but the issue is not resolved.

  When I solve the problem, he told me that "Windows could not automatically bind the IP protocol for the network card stack."

  Please note that the settings are correct as the TCP/IP and DNS are set on "automatically get an IPv6/4 address server / DNS automatically".

  Also of note is that in "Network connections" in the Control Panel, the device is listed as "Disabled", I click to activate it but it does nothing, the network connection is still disabled. When I click on "analyze what" the same message "Windows could not automatically bind the IP protocol stack to the adapter network." appears.

  I also have compeltely re-installed Windows 7 and use the system restore, neither worked.

  I hope you can solve this problem.
  Thank you
  Mickey

  Hi Mickey888,

  According to the information provided by the Edimax website this particular model supports up to Windows Vista only.

  http://www.Edimax.us/HTML/English/products/EW-7718Unspec.htm

  You can try to install the same in compatibility mode and see if that solves the problem. To run the troubleshoot compatibility utility follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

  Original title: Repair the connection to the local network.

  When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

  Hello

  1. what exactly is the problem you are experiencing when connecting with Internet?

  2. what type of Internet connection you have (wired or wireless) sound?

  3. don't you make changes to the computer until the problem occurred?

  Method 1: To resolve this issue, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) in the list of services, click DNS Client.

  (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

  (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

  a. right click on Client DNS and then click Properties.

  b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

  c. click Start, click applyand then click OK.

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Hope this information is useful.

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• Error - in Windows XP the external monitor laptop becomes primary, but Explorer windows do not go to the main window.

  Original title: xp laptop lidswitch and extended mode.

  I have xp laptop. I connect external monitor and set it to the extended mode with my laptop LFP as main and external monitor as secondary. Configuration of the power for the closure of the cover option as long as "do nothing".  Open an Explorer window and drag extended display. Then close the cover. The external monitor becomes primary, but the Explorer windows do not go to the main window. They are always extend on even though the extended mode is it more. Is this a known problem with XP? Anyone know? Thanks for your help...

  Hi jt_pan,

  Try to share the desktop on two monitors.

  For more information, refer to this link: How to configure and use multiple monitors in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.