Windows 8 on 5 Fusion cannot connect to the internet.
I installed Windows 8 on Fusion 5.0.2 under OS X 10.8.2. I can't connect to the internet. I upgraded from XP using a download from Microsoft (no DVD). How can I connect to the internet?
Add the following line to the configuration file the Virtual Machine's .vmx or remove the Virtual Machine settings and add the network adapter with the guest operating system Windows 8 value Windows XP.
ethernet0.virtualDev = "e1000e"
Take a look at: changing the file .vmx for your VM of Fusion (1014782)
Tags: VMware
Similar Questions
-
Windows XP Media Center 2005 cannot connect to the Internet
Dear all,
I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.
You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.
Thanks for your help and your time
Martyna
Hello
Sorry for the question but what modem did you mean?
A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automaticYou should also check that you firewall settings.
-
I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.
Please help me!
Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
This is probably caused by the settings of firewall on this computer.Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).
Hi rhonda9937,
1. what browser you are using to connect to the internet?
It is not recommended to keep Windows Firewall disabled on the computer.
This would happen if the ports are not open in the Windows Firewall.
I suggest that you open ports in Windows Firewall and check if it works.
How to manually open ports in Internet Connection Firewall in Windows XP
http://support.Microsoft.com/kb/308127
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
http://support.Microsoft.com/kb/875357
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I had Acrobat Pro 8.3 for awhile. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet. What should I do?
Thank you
Reinstallation of my original DVD has solved the problem.
Charlie
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now. When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc. The itunes gives error me is "make sure that your network connection is active and try again. When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed). I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks. The help and support center will not be to the point after that I click on it. I use windows xp sp3 home edition 2002. I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success. I don't know what to do at this point but to restart the system. Please help, any suggestions? Thanks in advance.
Hi unlucky2013,
Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?
Hello
- What connection do you use?
- What is a wired or wireless?
- What happens when you try to start Internet Explorer?
- You receive an error message?
You can check these links:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
http://support.Microsoft.com/kb/956196
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.
I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
I forgot since when this problem persists.
Please help me with this problem of internet connection,
List of maybe / don't may not be the problem:
1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus
2. my windows is still 8.0
3 ASUS N56V
4. browser chrome incognito window
Thank you Mr President, I found a solution for this problem
I just turn on the download via connections counters my PC-> devices config->download via connections counters
and then I tried to enter the following command at the command prompt run as administrator
netsh int ip reset c:\resetlog.txt
I hope this helps anyone else having the same problem as mine
Thank you again Sir
-
Hello
I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.Thank youoriginal title: wireless internetDo you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.
-
Original title: deleted Ethernet adapter
Hello
All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.I tried to insert Dell drivers and utilities disk, but that does not change.I tried to download on an other computer files from dell that look like they are pilots.I tried to set up a new connectionNone of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?Thank youKevinHello
1. what you're trying to fix by running registry cleaners?
2. How did you remove Ethernet card?
3. How are you online using other devices?
4. What are the devices are?Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Recently, install Windows XP Home and unable to connect to the internet. I have reset the modem, router and all my other computers work, but I installed XP on. Please help I need this pc for work.
Thank you
Lynn
You reinstall the network drivers?
-
WAG-120N and static ip - wireless and wired clients cannot connect to the internet
Greetings,
I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?
Thank you in advance!
The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.
Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.
The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...
-
WRT54GL establishment cannot connect to the Internet
I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet. Why the hell not? I am writing on the same laptop, using the same ADSL modem and Internet connection. So why don't the router sees it? The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of. I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked. So I tried both. Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet. Power, then turn on the DSL Modem. "I did already too many times to count. And again I say, this direct DSL connection of the modem for my laptop is fine. But when the cable Internet through the router, then the other wire goes to my laptop, no Internet. All the time my DSL modem displays a green light for the Internet. And the router shows a light on the Internet.
I'm too tired to walk any further tonight. Maybe someone has a simple suggestion. I'll check tomorrow.
Thanks for helping this rank amateur.
Try to configure the router manually.
Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.
Follow this link to configure the router with DSL Internet Service.
-
I have a laptop Toshiba Satellite M105-S3041 with Windows XP Home Edition. I received the error message listed above indicating that Windows cannot connect Internet using HTTP, HTTPS, or FTP. When I open the wireless network connection status, I see packets sent and I also see that I get both packets.
The opening to the top of Internet Explorer, I received the error message listed above. When I go to the properties of my wireless adapter and examine the properties of the TCP/IP parameters, I see that I have "obtain an IP address automatically" and "Obtain DNS server address automatically" checked. On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button. Here, I see that the ports TCP, UDP and IP PROTOCOL. I have a check the box 'enable TCP/IP filtering '.
Please help me because I am still unable to connect to the internet.
[snip]... On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button. Here, I see that the ports TCP, UDP and IP PROTOCOL. I have a check the box 'enable TCP/IP filtering '.
In general, you don't want to have a check in the box "enable TCP/IP filtering. Try to uncheck this box and see if it helps.
If this does not help, two programs freeware difficulty sometimes of the problems of this kind... Try to run LSPFix and/or WinSockXPFix. Alternatively, you can try to reset your IP stack...
"How to reset the Protocol Internet (TCP/IP)"
<>http://support.Microsoft.com/kb/299357 >HTH,
JW -
Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.
Original title: Windows Store-downloads
Try the troubleshooting steps below after completing the methods provided by Vinodh.V
Method 1: Make sure that the Date and the time is accurate
Open quick run (Windows key + R)
Type timedate.cpl , and then click OK
Click the Internet time tabClick change settings
Click update now , and then click OK once the time is Sync
Method 2: The problem may be caused by the Proxy settings
If you use a Proxy
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Of that type the below command and press enternetsh winhttp import proxy source = ie
If this does not work, you can reset the proxy settings using below command
netsh winhttp reset proxy
3:Fix Windows Update method
Running Windows Update troubleshooting tool can solve some problems.
Open Control Panel
Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view
Select the fixed problems with Windows update.
Select Next and then click Finish when the process is complete
Method 4: Search for the latest Windows updates
Open quick run (Windows key + R)
Type wuapp , and then click OK
Click check updates
Download and install all pending updates.
Restart the computerMethod 4: perform the Scan SFC
Press the Windows key + X to open the Menu power user
Click prompt (admin)
Type in the command, and then press on enterSFC/scannow
Method 5: Upgrade to the Local account and switch it to the Microsoft account
To switch to local accounts
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click on your account
Click Disconnect
Enter the current user password and click Next
Click sign out and finishing
Log on to the user accountTo switch to the Microsoft account
Press the Windows key + C to open the bar of charms
Click settings
Click change PC settings
Click USERS or accounts
Click to connect to a Microsoft account
Enter the current password
Enter the password of the Microsoft account and click Next
Click switch
Maybe you are looking for
-
Cannot open my music after the updat.
-
Hello I had my for at least a year, maybe 2 Z565 4311. Spontaneously, the fan died a few weeks ago but kicks back on shortly after and has worked little since then, but not really. It runs, it usually makes a lot of noise and he's usually pretty bad
-
sx700hs display will Dim when the camera in position portrait - intermittent
Sometimes the photos taken during the display is dark when sx700hs placed camera from landscape to portrait position the screen darkens and becomes unusable in the Sun, are very good. It is intermittent and barely had place indoors or in darker condi
-
Cannot install Windows 7 after upgrading to Windows 8
I've upgraded to Windows 8 on an Asus U43Jc and I can't install Windows 8.1 on the store or iso (DXC1900101 - 0 x 20017 error), so I want to downgrade to 7. In addition, WIndows 8 crash with a Driver_Power_State_Failure. This is another reason why I
-
Failed 801 META-INF/RDK. SF: File too big SF
Hello I recently started to test my application in release mode, and I encounter an error during the download of the application. The error message is: result::failure 801 META-INF/RDK. SF: File too big SF It seems that I share a similar problem as