Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

Chuck

I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

Tags: HP Desktops

Similar Questions

  • Problem with remote control in Windows 7 Ultimate

    Hi guys,.

    I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

    the remote control has stopped working & I tried to look for a solution but no luck.

    Please can you help me with this problem

    Thank you.

    Published by looks on 02/11/2009 04:51

    Hi Jajomafa,

    My problem was resolved a few days ago.

    There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

    The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

    I suggest that you run the automatic update.

    I hope this helps.

    Kind regards.

  • Apple TV remote control glass broke when dropped

    Recently, my husband bought our second Apple TV, an upgrade of the first edition, we have purchased four years ago. We are customers of long-time Apple and have always possessed several Apple products. We both like the updates to the new Apple TV with the exception of the remote control. There are a few things we don't like about the design. First, our remote fell of the couch on a ceramic tile floor and broken glass. Accidents happen, and I dare say that it is going to be a lot of unhappy customers when they abandon their distance and it crashes. I will say that if the remote was dropped on the carpet he probably have come out unscathed. The remote control fell to the back of the sofa at a height of about three feet. I think that the remote control must be able to survive a fall like that or maybe Apple could consider designing a case or neoprene as the channel to the remote control. The other complaints we have are things that we have learned to adapt to. Remote ginning glass is well issue and because Apple products are on the pricey side (I had to replace a laptop charge cord twice - $80 a pop - compliments of our puppy) we have not yet checked the cost of replacement.

    Yes. It is a delicate user in my opinion not the real world tested. There are other posts on the topic, and I saw the new cases that occurred just as we have for our other handheld devices.  I think Siri remotes are also about $80...

    I will also mention that the old Apple TV remotes work with the new ATV as well - except Siri.  In fact, I use remote money or my universal remote control harmony more than the included remote control of Siri (I can't find Siri on tvOS it useful - still).

  • A100 - PCMCIA form factor remote control that uses infrared

    Hello I just got my new laptop A100 custom. I works really well. However, I want to put on a new operating system. So, I want to collect the driver for infrared allowing my remote control to control the functions that it does now. Such as music playback volume and make presentations by far.
    This remote control requires a driver or windows will pick up the functions once I have installed infrared driver?

    The remote model number is RC102-841.
    I spoke with Toshiba support and they can't tell me anything. Also my manual has no info on the remote control, because my computer has been customized and so the manual comes with it did not cover the info on the remote control.

    All of the links for more information on this would be appreciated.

    Hello

    First of all, you can download all the manuals of the user on all laptops from Toshiba on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp

    You will find information about the command remotely. (Chapter 4)
    As far as I know it takes the remote control to use it on the Express Media Player.
    You must first install the EMP and then another Windows operating system.

    However, the remote control can be installed in the PC card slot. But you need to don t remote control drivers.

  • Impossible to use the IR remote control after you install Touchpad

    I have a C40 that was used with the infrared remote control successfully for months. I recently installed a Touchpad plugging directly into the 2nd port eNet.  The software is underway at 6.2.0.  Immediately after that I have connected and started using the touchpad, it was noted that the unit no longer meets the IR remote.  The base of the camera flashes when ar buttons pressed on the IR distance indicating that the IR signal is received, but there is no response from the codec.  Is this a "feature"?  Can I use the remote and the touchpad?

    Hello

    Touch screen and remote control cannot work side by side. Once the touch screen is connected, it takes full control of the on-screen display, allowing no changes from the remote control. This is expected behavior.

    Hope that answers your question.

    Thank you

    Saint André
    Telepresence solutions group

  • HP Touchsmart 600 - remote control issues

    I have 3 questions on the remote control for my HP TouchSmart 600, which works well for almost 4 years (not jinxies).

    #1 can no longer change the channel of the program guide.

    When I press the Guide button, the TV guide is displayed as expected. I can page up/down through the guide but when I press the button (the Center button on the remote control) to switch to the selected channel, it takes me to the library menu and position myself to the TV option saved rather than change the channel. He used to work. Note: I did take the trouble to restart the Live TV app like this seems to require to reach for the mouse.

    What I did or I'm doing wrong?

    #2 remote to 'enlarge' / 'restore down '.

    Is it possible to use the remote control to "enlarge" / "restore" in the Live TV window? Currently, I do it with my mouse.

    #3 remote sometimes loses focus

    I have never been able to identify, but the remote sometimes seems to lose focus. By this, I mean that it is as if the computer ignores all of a sudden. For example, many times I press the Guide button, the TV guide will go up but the up / keys does not work. I see that the computer receives the infrared signal because the blue light on the front flashes whenever I press a button on the remote control. Finally, after having rejected the guide and press different buttons on the remote control in a crazy attempt to clear the confusion, the remote control starts actually behave as expected.

    Advice would be appreciated.

    Thank you.

    Hi ou81aswell,.

    #1: looks like your remote can give wrong signals.  Have you tried restarting the computer?

    #2: no, the remote doesn't have this feature.  You will need to use the mouse

    #3: I've noticed that sometimes windows pop ups will steal focus from Media Center.  I found that by pushing the round button of Media Green Center of the remote control will take back you in Media Center.

  • Windows Media Center is unable to start with RF remote control

    WMC to: 6.0.6002.18242 (Vista SP2 - gdr.100414 - 0533)

    Remote control: Medion OR28v Vista remote control made by x 10 RF

    1. a couple of days, I tried to start WMC with my remote in the normal way, but nothing happened at all. Normal start was always activate WMC remote once the model has been started.

    2. Subsequently, I reinstalled the original drivers of my back on my hard drive. I then did a Windows Update and 2 X10folders have emerged, (X10HID and X 10 Transreciever(ACPI Complient) Wireless USB device)

    3. now, the remote has yet acivate WMC, after a start UNLESS I go into the PANEL... click on WIRELESS REMOTE SETTINGS... on which WMC activated instantly! (the channel also change Panel that appears, and then had to be cancelled)

    4. I can also activate WMC in the mouse in all THE PROGRAMS by clicking on the folder WMC

    5. I can now use all the functions in the usual way on the remote control. Also can I resart WMC at any time with the remote until I reboot/start.

    6. to reinstall the original drivers, para 2 refers, no functions of the remote control could be used even when starting the mouse during activation of WMC in the folder all THE PROGS of WMC

    .

    Thus, PES Advisor How do I get my remote to turn on the WMC after start/restart, notes: the remote control to activate all the functions but only when the WMC is active in the alternative path as described above (paras. 3 and 4)?

    It seems that nobody here knows answer (including me). I suggest that repost you this on The Green Button forums, there are some experts WMC.

  • Qosmio G30 - Media center remote control does not work in windows

    Dear all,

    I have a Qosmio G30-194,
    first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
    Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

    Please advise me what to do, should I send it to the service center, or there is an easier solution.

    Mazen h
    NB:,: my laptop info are:

    PQG32E-01P018AR model number

    Thanks in advance

    Hello

    > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    If you had a problem with the VGA chip then the whole motherboard has been replaced.
    Maybe it has something to do with your problem.

    Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

  • Satellite A200 - 25 X - remote control does not work on Windows 7

    Hello

    I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

    Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

    I hope someone here can help me.

    Thank you

    Hey,.

    Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Satellite > Satellite a series > Satellite A200

    Check this box!

  • I Don t see a button on the remote control to the top of the iTunes window

    I m trying to use the Remote app in my Apple Watch but I Don t see a button on the remote control to the top of the iTunes window to fit with my music library

    Hello

    The button on the remote control will appear in iTunes once you have tapped on the device to add within the Remote on Apple Watch app. Note that your computer and the watch must be connected to the same Wi - Fi network.

    In iTunes 12 and, later, the remote control button is located to the upper left, under the Volume slider. In iTunes 11 and earlier versions, the remote control is at the top right, under the search box.

    More information:

    Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

  • HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

    I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

    With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

    I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

    PainedByTech wrote:

    I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

    With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

    I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

    For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

    For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

  • Remote control does not not in Windows 7 Starter

    Hi all

    We have an application that can be controlled via the remote control. It works fine in Windows XP PC. But when I try to access the same by opening Internet Explorer on a PC running Windows 7 Starter OS, I only get the "download 0.00% of 0 bytes'. I disabled Windows Firewall and there is no software antivirus also. What could be the reason for this? How could I solve this problem?

    Thanks in advance,

    Luxama

    The system that had the problem was a netbook comes with Windows 7 Starter. We recently discovered that there are some parental control utilities in the netbook that has prevented the LabVIEW remote command access. We were not aware of his presence, and he had not shown any indication that he had blocked communication remote panel. We have uninstalled this utility & remote control began to work as expected. Thanks again for your help.

  • Explorer has stopped working (Windows 7 64 bit TouchSmart 520)

    s.o.s.

    Hello HELP MY

    Explorer has stopped working (Windows 7 64 bit TouchSmart 520) it sometimes freezes and the screen lock and I can not do or move with the mouse until it restarts to discover anything. And PC, and a slow opening nearly two minutes to get a word of welcome and then 50 seconds to reach the Windows desktop. Thank you for using the CDL sincerely

    Download Ccleaner from Piniform. Start the cleaner then the registry.

    http://www.Piriform.com/ccleaner/download

    In the Find box type msconfig and then press the start tab, send me a screenshot of this screen.

    Click Start, all programs, then click Accessories

    Click on command prompt and then click Run as administrator.

    If the user account control dialog box appears, confirm that the displayed action corresponds to what you want and then click on continue.

    Type sfc/scannow, it will take a long time to run.  If we don't fix all corrupted system files, let me know.

    Run a full scan with your antivirus software, also download and run Malwarebytes (free) and do a full scan also.

    https://www.Malwarebytes.org/downloads/

    Let me know the results of all of the above.

    Download Ccleaner from Piniform. The then run the registry cleaner.
    http://www.Piriform.com/ccleaner/download

    Search msconfig then para on Startup tab, send me a screenshot of this screen.

    Click Start, all programs, and then click Accessories
    Click command prompt, and then click on run as administrator.
    If the account control dialog box appears, confirm that the action displayed is what you want, then click continue.
    Enter sfc / scannow, it will take a certain time pay to run. If she doesn't fix all of the corrupted system files, let me know.

    Perform a full scan with your antivirus software download also and run Malwarebytes (free) and do a full analysis also.
    https://www.Malwarebytes.org/downloads/

    Let me know the results of the foregoing.

  • Remote control of windows 7

    Hello!

    I just installed Windows 7 32 bit on my DV3550eo but my remote no longer works. I have tried to locate the pilots of remote control or the receiver IR-on page drivers HP: s but found nothing. What can I do?

    / Martin

    Hello

    Try to download and install the ITE driver on the link below.

    FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45069.exe

    Once the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • Problem with windows 7 and infrared remote control

    Hi since I was in windows 7, I can't get the remote working again on my laptop HP Pavilion HDX X 16 - 1160US 16-inch I downloaded the correct drivers for it but it still does not funtion... You guys here could help me get the correct drivers or some magical driver that would work? Thank you

    Hello

    It is the only rider I can think.  Download and save it to your desktop.

    FTP://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44983.exe

    When the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When finished, restart the norebook.

    Best wishes

    DP - K

Maybe you are looking for

  • Password recovery

    I forgot the password for the "me.com" e-mail account and cannot synchronize the account on PC! What should I do?

  • How can I take my monitor off mode "Eve"

    How can I take my Q1859 monitor off mode "Eve"

  • SDStereoI.dll and Toshiba BluRay disc player

    Recently, whenever I start the Toshiba Blu - Ray disc drive, I get the following error message:Program cannot start SDStereoI.dll is missing on your computer. Try reinstalling the program to fix this problem. (Hidden Window: SMIPlayer.exe - system er

  • Satellite L500-131, an HDMI output to the audio amplifier

    Hello I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings... Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not ava

  • nested functions

    Hello I am doing a report with different signals on the axis y and I created a coordinate of curve to show the selected points. I don't know how to display the current value of the point initially reported drawn while the coordinate of the curve is m