Windows 8 Pro would be runs Qosmio G40?

Similar Questions

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!

• Need driver VGA Windows Vista Ultimate 64-Bit for Qosmio G40 - 11 d

  Please, I want to know how to get the driver for Windows Vista 64 - bit for my Qosmio G40 - 11 d because I can not find in Toshiba driver downloads or N-vidia.

  Consult laptopvideo2go (dot) com - they got modded drivers nForce who will probably walk!

• (1) in windows 8 pro can I run windows defender and 3rd party antivirus [like Mcafee] at the same time?

  Today, I have improved my final from Windows 7 to Windows 8 pro.

  (1) is Windows Defender, it works both as the same as MacAfee antivirus software?

  (2) if I use windows defender in windows 8 pro, do you think that I still need 3rd party antivirus software to protect against viruses and malware?

  (3) can I activate and simultaneously run 3rd party software [McAfee] antivirus and windows Defender 8?

  (1) # Windows Defender is an anti-spyware, and Mcafee's anti-virus.

  (2) Yes

  (3) Yes

  UTC/GMT is 03:46 Sunday, October 28, 2012

• Windows xp Pro chkdsk keeps running over and over again at the start and...

  Running the scan and says no errors found and windows has finished checking the disk and then rest on this screen. I'm unable to boot in a mode, including 3 Safe Mode options. Please help me to help my friend with this problem on his Dell PC.

  Before this error occurring, we run a defragmentation and planned Windows to check the drive for errors.

  Cannot start in safe mode as lists of lines of code system32, then freezes.

  Many Retarts have not helped.

  We have not cahnged anything using F2 or F12 to change Boot & startup menus.

  When XP restarts, it checks the "dirty bit" on each volume (hard disk) to see if a chkdsk needs to be run on the volumes.

  The dirty bit can be defined on a volume if you had a power failure or may have used the power button, had an aborted restart or an abnormal termination.    The only way to clear the bit of impurity on a volume is successfully running chkdsk with error correction (chkdsk/r).

  If you have a regular chkdsk in the meantime, he'll also want to run when you restart the system.

  When you start in Safe Mode, if one of these conditions are met, XP run the chkdsk command, and during this time, your system will be appear to be stuck, frozen or appear to hang with the last thing on your screen being loading mup.sys - shortly after charges mup.sys is when the chkdsk will start running and the system seems to be stuck.

  This suggests that their system is hung on mup.sys when he's really hung at all - chkdsk runs is because it takes or they old to many people is by planning the chkdsk at the next reboot.

  I don't know what AVG load and will not install AVG to know.

  If your system seems to stop mode without failure and the last thing you see on the screen is mup.sys (or in your case of the stuff AVG), look at the HARD drive access light.

  If the HARD drive is flashing, chances are good that the chkdsk command runs either because it takes or it, you have planned.  In this case, you will need to wait outside and if you use the power button, you could make things worse.

  You will need to wait outside and this could take some time depending on the size of the volume, the amount of data on the volume and what chkdsk finds to do.

  I think that I start your system in the XP Recovery Console and run chkdsk /r from there, so that you can actually see race and what he has to say.  If that chkdsk /r works own (it might take more than one pass), which erases the volume dirty bit.  It will not relieve your a regular chkdsk system, but I would start there.

• Windows 7 Pro remote printing

  I have a HP Envy 4500 all-in-one printer.  I am running Windows 7 and my client I remote in running me Windows XP Pro.  The printer was working well remotely.  Recently, my client set to upgrade to Windows 7 Pro and now the printer will not work.  When I print a test page, it says it is printing, and then he said: this is the removal.  When I tried printing with an Epson 310 printer it worked fine.  We uninstalled and reinstalled print drivers and HP printer on both machines a couple of times.  I also tried to install the printer with it physically connected to the computer as a local printer clients.  All the ideas that Windows 7 Pro would print then delete the content?

  Hello Claudia,.

  1. You receive an error message/code when you try to print using the HP Envy 4500 all-in-one printer?
  2. Work on the domain environment?

  I suggest that you run HP print and Scan doctor to find and fix common printer problems.

  Try printing HP and Scan Doctor for Windows

  The print spooler can be the cause of the problem, I would recommend that you print queue.

  Here is the method of stop print queue to force Windows General.

  1. go into Start, control panel and administrative tools. Double click on icon Services.

  2. scroll down to the Print Spooler service and right-click on it and select stop. To do this, you must be logged in as an administrator.

  3. then you must go to the following directory: C:\WINDOWS\System32\spool\PRINTERS. Delete all files in this folder. This will clear all print queues.

  4. now you can go back to the Services console and right click and select start the print spooler service.

  You can also go to a command prompt and type net stop spooler or net start spooler to start and stop the service.

  See also:

  Solve a problem

  Hope the helps of information provided. We know the results.

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• Hi all. I am running Windows XP Pro OS w/Firefox Add-on 26 does not correctly work anylonger of slow loading and crashes and everything is updated Server SP3 +.

  First of all, happy new year 2014 to Support technical and all everybody on board! I am running the last 26 Firefox on my windows xp pro and my system is all updated Net framework service Pack 1-3 + are good. Legit check, Microsoft etc complaints system. I also have the following extensions added: DNTme + / add-on / Duckduckgo + / and secure Preview-Site Advisor. I constantly receive messages from Firefox plugin like this: Script: chrome://ipv6ident/content/ipv6ident.js:1022 "not answered or busy. I use privet navigation a lot and the biggest problem sites are 'AOL' and my 'add-on' loved and needed. Does anyone else have this problem? And I would be very happy to Support entry on that too please. Thank you once again and please know I love my Firefox and really don't want to use my IE8. "Peek-a-boo" stuff is not help either but I'm certainly not worried at their subject because I do not do something bad or evil, then let them watch on LOL but they of course slow down a lot of things these days ha Ah! Thank you all, Michael.

  All fixed! So simple, but I don't think it was a factor. * Just go to tools-options and Firefox reset settings by default and Boom on it will come! I hope this helps someone bye, Michael

• Qosmio G40 - Intel Turbo Memory issue on Windows 7

  The Intel Turbo Memory does not work in my Qosmio G40 Windows 7. I tried different ways to install the drivers but only the work of the Intel Matrix Storage Console.

  If I try to install the full Pakage Robson, the material remains marked as a problem in the Device Manager and the computer crashes every time he goes into mode 'sleep'.

  Is there a way around this, or should I disable this feature (which was working under Vista before)? thanx

  Hello

  This feature isn t so important because he doesn't make a strong performance gain, but in your case I would try to update the BIOS. Maybe it will work or let's say that the computer goes into mode 'sleep' correctly again. The latest version, you can download the Toshiba site.

  What Intel driver, you have exactly? Have you tried the Toshiba site?

• Qosmio G40 Windows XP - some drivers/utilities missing

  Dear all,

  I would be grateful if anyone can tell where I can get drivers/utilities for Windows XP for the following:
  -Flash cards (to make the combinations of work: switch between monitors, brightness, ets);
  -Shortcut keys on the keyboard {eleven buttons}.

  All the other drivers/utilities have been found/installed/proved to work correctly. XP seems to work a lot smoother and faster on this beautiful piece of hardware.

  Thank you for your help,
  Kind regards

  The utility of flash cards is only available for Vista.

  I looked on the page of the Toshiba driver and, unfortunately, but I didn t see the XP drivers for the Qosmio G40 at this time.
  I assume that you've found the XP drivers some currents such as graphics card or driver sound on 3 third-party pages. But to use the features of Toshiba as button of keyboard shortcuts, you will need a XP driver and tool designed especially for this laptop.

  Looks like the drivers are not available at this time and we will have to wait until XP drivers will be sorry, but I really put t see another possibility.

  Best regards dude

• Qosmio G40 - webcam and windows live messenger

  Well I've had this problem before and was solved with the installation of Service Pack 1. Well now it comes back to haunt me again! Windows live messenger does not register the webcam. The cam works and I am registered in the control panel etc. It is only on live messenger it does not...

  As described above, I have a Qosmio G40 with Windows Vista Ultimate and windows live messenger.

  Live messenger is set to allow phone calls and Messenger live in general - but there is no exceptions for webcam in the Security Panel?

  Looks quite simply that the cam is not lit - I have a black screen with static...

  Any ideas to fix this?

  * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
  * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
  * Update your e-mail software (MSN/Yahoo Messenger, etc...)
  * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
  * Try to close the bar Assistant camera on the left side of the office.
  * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

• Qosmio G40 - infrared chipset not detected by Windows 7

  I upgraded to Windows 7 from Vista and found that my infrared chipset (SMSC SIO1049 SuperIO chip) does not appear in Device Manager.
  According to this page, it should appear as an unknown driver (ACPI\SMCB0C0)
  http://msdn.Microsoft.com/en-us/library/dd567986.aspx

  The IR remote control provided by Toshiba does not work (it used to work fine under Vista). All the world had the same problem B4? How to fix you (if you resolved at all)?

  Does this mean that Ineed to wait for the next update of the BIOS (my BIOS version is 2.20)?

  My computer is a Qosmio G40 PQG40 02201NCE.

  Hello

  If the device is not visible in the Device Manager, not even as an unknown device, then this means that the device does not exist or was not detected by the BIOS.

  Usually, the infrared receiver must be visible in the Device Manager under:
  Human interface devices - > infrared receiver SMSCIR

  In system devices, you should see the device consumer infrared.

  Don't forget that you have enabled devices hidden sow option perhaps of Device Manager, then you might see this

  Please also check the BIOS
  I'm not very well if the infrared device option would be listed in the BIOS, but you should check it m

• Qosmio G40-127 - need windows XP drivers

  Hello.

  I just got my new Qosmio G40 and I want to install Windows XP Pro / Media center on this issue. I know it's possible, but I want to know wich drivers to use in order to operate correctly. I already had drivers laptopvideo2go nvidia, realtek, and chipsetdrivers. I need webcam, wireless lan, TV tuner, etc..

  Y at - there anyone out there who have a Qosmio G40-127 and made a WXP install and know where to find these drivers? I don't have not upgraded anything but RAM to 4 GB. Otherwise, it is like new.

  Thank you

  Hello

  You are right. The XP drivers are not available at this time on the Toshiba driver page. I didn't find it too. Looks like we have to wait...

  But listen;
  There are some XP drivers for another Qosmio series; G30 for example.
  You can try to install these unique pilots because many laptops are equipped with the same features and drivers may work too.

  The WLAN driver can be downloaded from the Toshiba WLan Portal:
  http://APS.toshiba-tro.de/WLAN/

  like driver BT:
  http://APS2.toshiba-tro.de/Bluetooth/

  The LAN driver can be downloaded from the Intel page because as far as I know LAN chip is an Intel 82566MC(Nineveh MC)

  Best regards

• Satellite A200 - 1 3 - readers of the need to run Windows XP Pro SP3

  Hello

  I need help to find the disks required to run Windows XP Pro SP3 PT - PT on my Satellite A200 - 1 3.

  Due to the extremely poor performance of Windows Vista, I did a downgrade of the operating system and I've managed to install the SP3 Windows XP Pro PT - PT, but some components does not (Ethernet, network, WiFi, Audio, Modem, video VG compatible) as they shoud due to the lack of correct readers for XP.

  I tried to find the spec of my machine then trying to find the right drive in the components manufacturer sites in the Toshiba site, but it turns out be a mission impossible because it seams to have a detailed description on all machines A200 except A200 - 1 3.

  If you can help me on this topic, I would be grateful. Thank you.

  Why you don't use an advanced search option here in the forum to get similar questions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57916