Windows 8 stuck in black screen after "making auto repairs.

I had my HP laptop for five months. A few days ago that I opened the lid of my portable computer and it loaded and said "Configure automatic updates" at this stage, it was frozen. I held the power button down to do a hard restart. I turn it back on and it wouldn't start. I did a system refresh, defragment HDD, ran CCleaner and started in safe mode. At this point, the hard turned 100% use no matter what I did. I couldn't find a solution I did a system reset. He reset the whole PC and reinstalled Windows 8.  It got stuck in the facility to a black screen with just my mouse. I turned it off. Now when I turn on my laptop the screen goes black for about 15 seconds, then HP appears with "Automatic repair of preparation" below logo. It does this for about 20 seconds then the screen goes black. I left my computer for about 7 hours and the screen was always return. I do not have windows 8 CD or USB key. What can I do? Nobody here was willing to help with this problem, although there are a lot of Windows 8 users who have this. At this point, I am considering buying a Mac that I can't do it in the face of Windows 8. If someone could help me it would be apprciated. Thank you.

I tried several repairs. I did a disk check by pressing F2 during the launch, and he said that the hard drive has failed. I contacted HP support and they are sending me a box to put my laptop in which I will return. So they will be replacing as there is somehow guaranteed on this subject. If someone experiences this problem, it is probably a hard disk crash. Good luck

Tags: Windows

Similar Questions

  • the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

    I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • HP Pavilion 8 Windows: my hp pavillion windows 8 has a black screen after I put my password in

    After i.put my.password in expenses n then goes to a black svreen. I have tried f11, taking battery, reboot, close to the bottom.., .nothin works... Please.Help

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

    Kind regards

    DP - K

  • Computer now put in hibernation, Vista will not boot. Computer stuck on black screen after startup. Help?

    I put my computer on 'Hibernate' when I went to bed. When I woke up, I started the computer learned to manufacturer (HP) computer screen introduction as usual, but windows doesn't not load afterwards, as he usually does: I just get a black screen. Lights supply and all the rest are on. Just nothing happens. Any ideas?

    Can I use the firmware from HP (I guess that's what it is) to confirm that my memory and hard drive are very good. I tried Googling the problem, and some signs indicate a problem with the powercfg parameter. I can't get in cmd.exe to reset because I can't get into windows (although through HP firmware, I can enter in "Administrator: X:\windows\system32\cmd.exe - cmd", which seems the same, but the orders that I see offered on websites do not seem to work - help?). Ditto with Safe Mode. I don't have Vista installation disc.

    Any help is very appreciated.

    Hello

    You need to contact HP and install recovery disks command to perform a repair.

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  • Emergency aid. Stuck with black screen after installation of el capitan

    My macbook pro very frequently showed the circle of death. So I've updated for Mac el capitan. After many attempts, I've been successful. But once again the wheel of death problem started. so I decided to reinstall. After the reinstallation, I got a blank screen with a cursor. Does not further. After I stopped and restarted, I just get a screen version of the kernel and it restarts. So I'm stuck. Please if someone could help me. Its urgency. Mac not opening.

    Try this first and report back.

    Try safe mode if your Mac does not end commissioning - Apple Support

  • Black screen after the attempt to upgrade to windows 10

    I was trying to upgrade windows 7 on a laptop HP Windows 10. The first attempt was via the white windows logo in the taskbar. This attempt was interrupted, probably accidentally turned off the button wifi trying to move the computer. The second time I tried to use windows ten upgraded Installer. I did the usual download and installed up to 99%. He remained on the installation of 99% during the night and the next morning without change. I turned off the computer and he made a series of updates before shutting down for good. When it starts again, it has a black screen but the cursor is there and movable. I tried in safe mode for the repair and restoration of the system, but it did not work. I tried to reset the BIOS to default, but does not. I try to leave the computer turned off for an extended period of time disconnected from the internet to see if that helps. The last attempt to start, windows 7 seems to start but then ends up on the black screen and I held down the power button to stop it. I'd rather upgrade to windows 10 if possible, but if cannot then if can go back to windows 7 will be enough. It worked great on Windows 7 before trying to upgrade, so there is no problems with the computer.

    Hi Chris,

    I'll be happy to help you with the problem you have with black screen.

    The problem may occur if the video drivers are not updated.

    What is the model of your HP computer?

    I suggest you follow the suggestions by Sharath Srinivasan replied on August 7, 2015, the link below:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

    Please reply with the results, we are happy to help you.

    Thank you.

  • Black screen after upgrading to Windows 10

    I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

    can help me, thanks

    Bill

    Hello

    I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

    I suggest you refer to the suggestion of Sharath Srinivasa on August 7th, 2015:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

    Hope this information helps.

    Please get back to us with an update on the issue, we will be happy to help you.

  • At the end of the factory restore, but black screen after "Windows has set up the computer.

    The model in question is VC863AA #UUW

    I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

    .. until step 10, which States:

    "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

    Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

    After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

    So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

    If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

    «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

    Rough translation:

    "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

    If I restart the computer, it goes back to the black screen after the windows loading bar.

    This suggests that there is something in the installation of Windows who jams it.

    I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

    Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

    I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

    I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

    The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

    I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

    A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

    So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

  • G62 b90 - ev: black screen after Windows loading

    Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

    Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

    Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

  • Black screen after entering the password to open Windows Vista

    I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

    Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

  • Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

    recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

    Kind regards

    DP - K

  • Black screen after the windows login

    Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

    -Task Manager is able to open when the screen is black (shows explorer.exe running)

    -J' have the drivers on the HP support site

    -laptop is HP Pavilion DV7 3024ca

    You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

  • Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

    Original title: windows does not

    I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

    What can I do?

    Enter your bios usually with keys F2 or delete to the first powered

    Use default Optimize can be the F5 key and save and exit,

    Insert your installation disc or flash media and press F8 or F12 to boot on it

    Then use the recovery tools to run the Startup Repair tool.

    http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

  • Black screen after the Windows Logo

    I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

    I use windows 7 ultimate 32 bit with the latest drivers & updates

    Hello

    What is the code of Bug_Check of BSOD?

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • black screen after the mode standby, windows 8

    I upgraded my laptop HP dv6 to windows 8. I get a black screen after I wake up from sleep mode. as if the monitor has no power.

    In fact, I solved the problem by upgrading my graphics card driver.

    but I was troubled because I thought that it was up-to-date.
    display the properties of the computer - device manager - adapters - NVIDIA GeForce GT 230 M
    I have a click right on NVIDIA GeForce GT 230 M, and then clicked on update driver software. He told me that the driver was updated.
    but I checked the nvidias site. There, I found a newer version.
    It was confusing. Why windows can't find this newer version?

Maybe you are looking for

  • I have more than one firewall installed product. How I can for deleete all and keep only the MSN Firewall?

    I got like Norman antivirus programs and now I move to Msn essintials. but the computer turned out to be very slow. I scanned the computer with the MacAfee Scan more and I got a message that I have more than one firewall installed, product that could

  • off on his own laptop computer

    After 60 days of no use, my computer laptop gateway has a problem standing on. Sometimes it will stay for a couple of hours and other times it will last 30 to 45 minutes. Sometimes, when I turn it back it will be stop right then. any ideas would be a

  • In Vista, lost the Japanese IME icon in the taskbar

    I used the cleaner software to help you get rid of the junk in my VIsta system and I lost my Japanese IME icon in the taskbar. I went to the regional settings deleted IME and put them again, I changed the regional language with no luck... Why can't d

  • on the upgrade of windows

    I updated to windows 7 8 real of dreamspark Windows Genuine... my pc has become very slow what do fast it? Should I uninstall or remove some of the programs on my C drive?

  • Reinvest a presentation Manager and detect any changes in size

    Hello I am trying to create a user interface that mixes elements I draw myself with native widgets and I do this by substituting the painting and drawing to an image in the background before drawing the fields themselves. To position the fields, I cr