Windows 8. The mouse cursor disappears after that my computer sleeps and wakes up then.

I unchecked property "mouse shadow."  After about 5 minutes of my violin with the other properties of the mouse, the cursor appears again.  My computer is brand new.

Howdy,

I too have been looking for forums and playing with the power settings for days - it was driving me crazy!

I happy to report that I found a work around for this problem.

Simply plug your mouse / KB in a USB hub - I got a hub powered bus of really cheap 4 ports (one that does not require an external power supply). If you like your classic Intellimouse Optical as I do, it may be the solution for you.

Hope this helps someone.

See you soon.

Tags: Windows

Similar Questions

  • Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

    Hi all

    No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

    Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

    Black screen with blinking cursor:

  • The mouse cursor disappears from Windows Update 8.1 "friendly office.

    Hello. Since the installation of the 8.1 major Windows Update sometimes the mouse cursor disappears after connect you (unlock) or when switching between multiple virtual machines. Reconnect the mouse is back.  Someone at - he had similar experiences? We have a zero client to connect to the virtual machines. We use Vmware View Horizon with the latest updates and only with PCoIP.

    Edit: I already reinstalled VMware Tools and VMware View Agent

    Try the following,

    Change the registry key 'EnableCursorSuppression' to '0'.

    HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableCursorSuppression = 0

    It worked for us.

  • The mouse cursor disappears on the address and search bars.

    In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

    Problem solved for me in the last version of firefox v.10.0.1

  • The mouse cursor disappears when iTunes movie go full screen

    This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

    Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

    Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

    After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

    Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

    I changed the Style of zoom "full screen" even once, and the problem resolved.

    If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

    We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

    For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

    1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
    2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
    3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
    4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

    You can also find other ways to retrieve the cursor of your mouse.

    Hope this can help you with the mouse pointer disappears.

    In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

    If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

    Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

  • The digitized files disappear after that scanning with HP Solution Center update

    The digitized files disappear after that scanning with HP Solution Center update

    Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

    Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

    Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

    Have tried uninstalling and reinstalling several times.  Does not work.

    See you soon!

    Hello

    Two questions actually related to each other.

    Please, try the following:

    Make sure that the HP Solution Center is closed.

    Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

    Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

    Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

    Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

    Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

    Please let me know of any changes.

  • After clicking on the send/receive tab (windows mail), the info box disappears after a second.

    I can not receive or send e-mails, the box of the task appears, then disappears immediately.

    Try to remove your e-mail account, and then repair the database with this utility (www.oehelp.com/WMUtil/) and then add your account again.  Also, pay attention to program 3rd party interference.  See www.oehelp.com/OETips.aspx#3
     
    Steve
     

    I can not receive or send e-mails, the box of the task appears, then disappears immediately.

  • The mouse cursor disappeared

    Separated from this thread.

    I have an Inspiron 11 and have the same problem. Now what?

    Hi Susan,.

    Thanks for posting your query in Microsoft Community.

    Try the same combination as mentioned here or Fn + F3, or you can check with Dell.

    If the problem persists, try downloading the latest touchpad, but also the drivers from the Chipset of the site Support Dell for the same model that you have.

    You can see: Support Dell

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • I have cs5 and it was working fine and now he keeps asking the serial number even after that I put it and gives it the green check mark then it goes straight to that now

    I have cs5 and it worked very well and now he keeps asking serial number, even though I put it and gives the green check mark then it goes straight to that now or it just goes to the license agreement and when I accept it is going t - he once again.  I have uninstalled completely and then reinstalled several times and still the same thing.

    Csingleton11,

    WIN8 is not listed as an operating system that can run CS5 (see technical specifications); However, some users were able to run it in compatibility mode with success. See this link if you want to give that a try: CS5 installation on Windows 8

    Guinot

  • Login screen - increase in the length of inactivity before that my computer locks and I have to enter my password to get back in

    How do you change the delay time on screen password so that I don't have to enter my username and password when I don't use the computer for several minutes?

    It is a part of the screen saver settings.

    Right-click on an empty area of your desktop, then click on 'Properties'-> Screensaver (tab)
    Then change the number in the 'Wait' box to set the idle time before the screen saver starts.
    You can uncheck the box "On Resume, protect by password" If you never want to enter a password on the resume.
    Then press "OK" your way out.

    HTH,
    JW

  • My mouse cursor disappears randomly everything using Windows 7 64 bit

    Original title: the mouse cursor disappears

    My mouse cursor disappears randomly everything using Windows 7 64 bit.  This can occur when you use IE8, but also other programs.  I have to reboot to get it back.  This seems to be a common problem.  Is there a solution?

    Thank you

    Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

    Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • HP 15r205tu: i3 5010u, uncore after sleep and wake up power consumption increases

    After start of the uncore cpu power remains unused 1W (according to the CPUID HWmon) below.

    If you sleep and wake up the laptop, then the uncore power increases to approx. 2W.

    Time remaining on the systray icon is touched by it.

    Navigation on the duration of use of a low-power battery is reduced after sleep wake cycle.

    Is this a known issue? Is there a solution?

    Thanks for the post and suggestions.

    Now, I know what has caused this problem.  I had turned off the network adapter cable into the Device Manager to save energy!

    This caused the uncore somehow to go crazy and pointing up (only after the day before). Now, I have activated the wired lan card and all is well. The laptop can be used for about 9 hours on battery power saving mode now sometimes the loading of web pages.

    Thanks again.

    PS: If any unused pci express port is disabled it can lead to the same behavior.

  • HP Paviliion cursor disappears after using the touch screen

    Hello

    So, I just bought a new laptop from HP Pavilion special edition beats 15z Touhscreen about two weeks ago. I was with the sliders and just decided to try some custom cursors. I have downloaded them (link to the page for the sliders below) and selected in the Control Panel, no problem. However, as soon as I use the touch screen, it disappears (which is normal), but when I try to use the touchpad or mouse, it doesn't come back, unless it's one of the other cursor types: link select, busy, etc.. Also, if I use custom to select all normal but the cursor jumps back. Finally, even if I click on a link that would otherwise use the selection cursor link using the touchscreen, the link selection cursor appears again when to switch it on touchpad.

    The other problem is happening sometimes just by default, for the most part in Google Chrome. However, with the custom cursor happens no matter what, and it's a major problem.

    Thanks for you help with anything that can give me.

    Data sheet:

    Windows 8

    AMD A8 - 5545M APU with Radeo HD Graphics, 1.7 GHz

    8 GB RAM

    processor 64-bit / x 64

    Full Windows touch support contact w/10 Points

    link to the download page for sliders: (if so, Im just trying to display all possible information)

    Slider Preview/download page

    Hello Tony,.

    I apologize for the inconvenience caused.

    Lets try the following methods and check if it helps.

    Method 1: As you said that it happened also with the default cursors as well, I suggest you to try the mouse setting in Windows 8.

    1. go in Control Panel.

    2. go in the mouse settings.

    3. uncheck the option for the mouse to disappear while typing.

    4. now check if the system built in the cursor disappears.

    Method 2: As you say it happens only with custom sliders, I would suggest that you check to see if the problem persists even after placing the computer in a clean boot state.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»

    Hope this information can help, just reply to the State of the question for any other help.

  • My mouse cursor disappears behind the image, I work with!

    While I was working on an image in Photoshop, my mouse cursor disappeared. No line of sight (I already tried to turn the caps lock). He had just disappeared. I was moving my mouse and it appears each time I chose a new tool or when I work with layers or when I use something in the drop-down menu, the mouse is there when I did open in Photoshop - just at the moment where I have the program open - but whenever I start to work on an image or a blank canvas disappears that's going under canvas (I found that I can still draw and erase on the canvas, I can just say where because the cursor has gone). It's frustrating because I use Photoshop to create my digital work and my drawing pad is small, so I need to know where my cursor to shoot accurately.

    (I use Photoshop CS6 and I use it on HP EliteBook with Windows 8)

    Things I did to solve the problem so far: I downloaded the current update of Adobe, I tried to adjust my settings to properties on my computer, I tried to adjust my cursor settings in my preferences, I tried to reset my presets - thinking I might have Miss clicked on a key combination to achieve - I also tried closing and go into Photoshop, even turned off my computer , let rest and then back on. But my mouse cursor continues to disappear under the canvas.

    I intend uninstalling and then reinstalling my software Photoshop - I hope it works. Otherwise, if it is not, someone knows how to fix this?

    Post edited by: Nelson Keely

    Okay, so I figured this out how to solve this problem, a few days after the publication of my question. If you have the Nezumi Pro plugin for your Photoshop there is an option in settings of Nezumi to hide your cursor which can be easily activated by Miss simply by clicking F6. Once I understood this and changed my cursor back to normal settings, my mouse reappeared.

  • The mouse cursor freezes, Silverlight Plugin, Windows 7 Pro 64 bit.

    When activated, the plugin Silverlight 4 freezes my cursor of the mouse on the web pages with Silverlight. Disabling Silverlight plugin restores the function of the mouse cursor, but disables display Silverlight content. Occurs with the latest versions of Firefox and IE. The PS2 and USB Wacom input Tablet mouse freeze. Keyboard PS2 remains active, except the "Mouse keys" used in the cursor. Must press 'Back' key to get the silverlight content web page up the function of mouse cursor. Update drivers Wacom and drivers MS Intellimouse Optical. Uninstalled and reinstalled the Silverlight 4. Problem remains.

    Platform: MS Win 7 Pro 64-bit. All updates current. Material: Card mother Asus P6T, Core i7 930 CPU, 10 GB of RAM. Security through Zonealarm Extreme Security Suite with active Forcefield. No problem on my PC with Win XP Pro 32-bit.

    I can't determine if it's a bug with Silverlight/Win 7 64 bit or a problem with my computer/hardware. I don't have problems with my mouse cursor otherwise. The research of this question gave no solution. Suggestions to solve this problem would be appreciated.

    Hi DelgadoFlash,

    1. did you of recent changes on the computer?

    2. the problem persists both 32 and 64 bit browser explore?

    This can happen if you haveWacom Graphire Tablet input connected to the computer.

    You must disable Tablet PC Input Service in the Service Manager and check if the problem persists.

    (a) click Start menu and type services.msc in the search box and press enter

    (b) later in the list of services, locate Tablet PC input service.

    (c) make a right click on it and click Properties, set the Startup Type to disabled and press the Stop button.

    (d) close the services window

    After disabling the service above you won't be able to use the device.

    As a work plug the appliance only when you need to use.

    Rename an executable file calledWISPTIS.exe in the C:\Windows\syswow64 directory to something likeWISPTIS_old.exe.

    WoW64 is synonymous with "Windows on Windows 64-bit", and it contains all the files of 32-bitbinary required for compatibility.

    If the above step works, then you will need to contact Wacom to check if they have released an update on this issue.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Recent survey of Windows Live (?) to reset the username, Passwork, Date of birth, country or territory

    I received 2 requests for Windows Live team asking me to change some of my personal information.  One is from "MSN Hotmail! «Customer service (* address email is removed from the privacy *) "and the second came from" Windows Live team (* address emai

  • Upgradeing GPU NVIDIA 980 m

    Hey guys, I have an Alienware with two GPUS of 770 18 m in sli. I've been asking may well be the new nvidia 980 m gpu Sli d together and if yes, are they compatible with my system. Congratulations in advance with all your guys help.

  • processor image running on 2 hearts

    Hello, my image processor runs on 2 hearts despite the fact that it ran on 4 cores previously. I tried msconfig and easy bootcd but it not work. Msconfig has shown only 2 hearts in the chekbox. I've noticed in easybcd when I click Save sessions box i

  • My Microsoft Account is hacked

    Hi, I made a new live account just to send microsoft a support ticket. It has been almost 24 hours but there is no reply yet. Please do this favour and help me get my account back. Its really important as I have all my legal info , personal etc in th

  • Subscription vs Desktop license

    do you get free updates with the full desktop version of acrobat pro dc as and when they are released? As you would with the version of the subscription.