Windows 8 wireless network card problem

Hello

I have problems with my wireless adapter (Atheros AR5b93-already updated to the latest version of the driver). Often some time after I watch videos (offline). There will be delays in the video, and then all of a sudden the wireless network disconnects and shuts off even when my Acer wireless button is showing its active (orange led is lit). Usually I click on troubleshoot and it gives the network card and all goes well for a while then it happens again unless I close the video. Sometimes the adapter will be hidden and it will say my hardware is not found (CODE 12). What is going on?

I have made yet. I made a few adjustments. I went to the network & sharing Center > change adapter settings > change the wifi settings and I have checked this box (LLDP Microsoft protocol pilot) and disabled my ethernet (I used never she and doubt if I ever will be) well. Hope this solves. Blue microwave THX! Will follow your advice if it does not work

Tags: Windows

Similar Questions

  • Wireless network card problem code 13

    I had trouble with my network using wireless for the past weeks. When I went to see what was wrong with my wireless adapter, it was no problem, but the 6to4 card and adapters itap had an error 13 code. I tried uninstalling and reinstalling, but my wireless still doesn't work.

    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    Read the above on 6 to 4 adapter problems.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    ·                        ISATAP adapter:

    ·

    ·                        http://support.Microsoft.com/kb/932520

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    Windows cannot load driver (Code 31)

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    For wireless problems:

    Check that the wireless switch, if there is one in the laptop is turned on;

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Please help wifi does not not ACER aspire 4710g (wireless network card problem)

    Please help me

    C:\Users\ali>ipconfig/all

    Windows IP configuration

    Name of the host...:-PC

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt #.

    2

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: Network adapter on Broadcom 802.11 g

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 318775098

    DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Broadcom NetLink (TM) gigabit Ethernet

    Physical address.... : 00-1D-72-1B-B7-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Anchorfree VPN #2 HSS

    Physical address.... : 00-FF-03-C6-CD-54

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Card Anchorfree VPN HSS

    Physical address.... : 00-FF-EF-4A-57-34

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    C:\Users\ali >

    AWI

    There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

    I would start by removing the current driver of sifi and install the latest driver available.

    The IP address for the above connection is

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

  • G62-233NR wireless network card problems

    Okay, so I tried to do a little research, but I'm not sure I found my problem or a solution.  I have laptop HP G62-233NR and it worked fine up until tonight.  He won't have a wired or wireless connection to the internet.  The troubleshooting tool Windows says there is a problem with my adapter wireless and wired.  I have the Realtek RTL819SE 802.11b/g/n WiFi Adapter and under my connection to the local network, it says the Realtek PCIe FE Family Controller.  Now, I tried to download the latest drivers on my desktop and install via USB key, but even after that I have do always run into the same problem.  So I have two questions, is any way to fix this and if it requires one or more network cards new that it would be better that I can get which is compatible with my laptop?  Thanks in advance!

    Hello

    I doubt the two cards that jump on you at the same time, but who knows...

    You can install one of the cards in your maintenance manual with the part number of HP wireless. The wired adapter is part of the motherboard and cannot be replaced individually.

    While I don't have a definitive answer for you, I suspect some sort of software problem.

    It may be worth it to you to back up your files and perform a system recovery and see if that solves the problem before the purchase of new equipment.

    Paul

  • Satellite C660 - 2 7 - wireless network card problem or not?

    A couple of days, that I dropped my laptop maybe 3-5 inches above the ground and he hit the brick of charger with a small thunk. I have use it again until the next day and since then, internet connection has been patchy, at best, for the most part drops every 3-4 minutes (he always considers it is connected for awhile, but no page doesn't load and Skype shows no connection) and slow when you are connected.

    Running the tool to diagnose windows usually resets the wireless network adapter, also tells me reset the router and will often complain of DNS...connectivity/nameservers/something of this type, usually that they one after another, what is the problem is not really clear. This problem only occurs on the floor and everything seems fine down (the router is downstairs, but is not really further and is located next to the open staircase), but as it was only a few days, this could just be lucky and not relevant. Also the internet connection (ISP, BT terrible btw) has been terrible lately in general, have been on the phone to BT about it several times to complain with no improvement (because they have not done anything).

    Thus, it + pourrait + just to be the internet connection, I really only has not let down any high rise (it was a landslide while reaching to position it on the ground), he is poor at the moment and reset the router seems to have an effect, but does then reset the wireless network adapter (temporarily) and timing is a bit co accessory. I think that this is probably the Ondaaah just lost, but I'm not an expert or a techie and this is my first windows laptop to... Well, never! And I could be totally off. It is also been connected all the time that I was typing without problem, but I got it with the keyboard tilted up slightly to rest.

    Can anyone help? I don't want to get it looked at if nothing is wrong (especially if it's just BT once again, I'm about to give them up for another access provider), but I don't want to leave if it needs fixing and find it does any connect. Even a "Yes, it could be that" or "no, it won't be this" kind of reply would help ^^

    * Edit I ran the Toshiba assist, diagnostic tools and it passed all the tests by default, but he will try next time stops internet connection (probably soon)

    Post edited by: idleRAT

    What is with the local network connection? Have you noticed similar problems link your laptop by using the LAN connection?
    >... but will try next time stops internet connection (probably soon)
    Test it and send feedback.

    At least, you can install original recovery image and test the feature with the factory settings.

  • Aspire 4730Z wireless network card problem

    My internet connection suddenly stopped wireless adapter. He pointed out that my wireless router cannot connect to the internet. However, I know this isn't the case since all my other devices connect via the same router. The same thing happens when I plug into the ethernet cable.

    Sometimes, he says that the IP configuration is wrong on the router. I wonder if something happened to the Aspire that it prevents to read the IP configuration, and the error message is an error of interpretation of this problem.

    I would discuss with support on this point, but my series/snid number rubbed on the label, and I don't know what it is.

    I had already tried these suggestions. Here's what worked - I downloaded and installed version 8.1 of Windows driver for the card. So far, Microsoft update he crushed once more, but now that I have the installation of the adapter installed on my desktop, it's easy to put the old one back. Apparently 10 Windows is not stable drivers for all Broadco / Atheros adapters again. It's the wrong Microsoft adapter driver in Windows update that caused the problem. To fix it, visit the website of your computer manufacturer and download and install version 8.1 of Windows.

  • X 31-bet to upgrade to Windows 7 - wireless network card does not

    Hi all

    I'm sure that someone has gone through the same question. I've updated from XP to W7 and knew that I would need a new driver for the card Atheros 11 a/b/g wireless LAN Mini PCI. Since then I have thown a lot drivers offered by Lenovo the X 31, but the map does not work.

    All suggestions and advice VERY welcome. Thanks in advance

    Concerning

    Jochen

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67214

    Have you tried it yet?  This is for xp, but it should work.

    http://www-307.IBM.com/PC/support/site.WSS/TVSU-update.html

    You can also download Thinkvantage System Update and let it find your driver.

    Sometimes drivers automatically do not install themselves.  You will have to perhaps go into Device Manager and manually update the driver.  Do not let windows, search for it, that it points to the folder where the driver got downloaded.

  • Need driver for MN-510 for Windows 7 wireless network card

    I lost the CD for my MN-510 wireless adapter have been find the driver?

    Driver for MN - 510

    Hi Starr-baby,

    Please see the following link for information on how to replace your CD:

    http://support.Microsoft.com/kb/326246

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problems installing Satellite Pro 4600 wireless network card

    I have a Satellite pro 4600 since 2002. I've never been checked his internal wireless network card. Today I'm trying to use it, but I am unable to even install it.

    1) there is a little left switch of the laptop. I do it ON the switch but it didn't not repond on that not everything on same desktop light next to this switch has.

    (2) there is not any link showing option wirless card I can update and install the Device Manager.

    (3) I have dual boot windows 2000 and xp. In the two I tried to install the driver of his CD moose. But there was no requirement for the office and even in network and Device Manager.

    Please give me an urgent response.

    I have a similar problem. The text of presentation for the Satellite Pro 4600 says 'model of communication center Mobile with wireless built-in on all Intel® Pentium® III, LAN module card integrated 10/100 Ethernet NETWORK and international integrated V.90 data/fax modem'. Mine is a model of the Pentium III. Operating system is W2K fully patched.

    I used the interface NETWORK built-in Ethernet and modem V.90, but so far never had the opportunity to use wireless. The wireless on the left side switch produces a light. Should this model use a wireless PC card? If so, where would be a?

  • Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

     

    A problem with your wireless network card

    Your wireless card has stopped working properly.

    To see if an updated version of your WLAN card is available

    Hello Jeroen Ratz,

    You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Error message: a problem with your wireless network card

    Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

    Your wireless card has stopped working properly.

    There is a network adapter that allows your computer to connect to a wireless network.

    To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to upgrade the wireless network card in Windows Vista

    Hello

    Please how can I update the wireless network card?

    Thanks for the help

    Hello

    I suggest you try the steps from the following link to update the wireless network card drivers.

    a. right click on the Start button and click on Device Manager.
    b. display all devices on one.
    c. right-click on the WLAN driver and click on Update.

    Display us the results, once you try the steps above.

  • Can satellite M65-S9092 - I put the wireless network card?

    Hello

    Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

    So I would update my card if possible.

    Thanks in adavnce

    Concerning
    Paul

    Hello

    I think that it shouldn't be a problem to upgrade the WLan card.
    As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

    The wireless network card supports two pins for the WLan antenna cable.
    Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

    All that s

  • Satellite L500 - can not turn on the new wireless network card

    I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
    But I can not turn on wifi with FN + f8 key - Windows.

    This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
    Can anyone provide another solution than to change the map?

    PS.
    I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
    PSP.
    I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

    Post edited by: Ipcur

    Hi Ipcur,

    Why you traded with another wireless network card model?

    He works with the wireless network card preinstalled Toshiba?

  • Satellite Pro L10 - wireless network card is not detected in Win7

    Hello

    I have a dual boot with XP and Win7 Pro.

    If I install the wireless driver from the download on XP site, no problem.

    I tried the same procedure using the download wireless driver on the partition Win7 using a) driver XP b) driver Vista & c) the Vista driver in compatibility mode. Nothing worked and it is even not a yellow exclamation in Device Manager, so the wireless card point don't has not recognized at all.

    Same problem with Ubuntu Linux.

    In XP, it is recognized as "INPROCOMM IPN2220 Wireless Lan Card".

    Any ideas?

    The entry in Device Manager is right and so must be included in Windows XP Home edition.
    This old model of laptop is not supported for Win7 and on the download section Toshiba WLAN I cant find driver for Intel PRO/Wireless 2200 WIRELESS network card.
    Googling around, I see many people have the same problem on different models of old laptops.

    Have you tried to find the driver Googling autour?

Maybe you are looking for

  • Broken button Satellite A300D-17F

    I removed a button on the keyboard and I broke a small piece of plastic under the button construction. Can I find a new plastic construction and replace because the button can now be removed without any strength? :(

  • OfficeJet 6500 Wireless: not readable display

    My display screen has vertical lines and display them the words are more readable. Slowly, they started to disappear last year. I did a soft and hard (unplug the printer, hold down the 3 and #, plug printer in). Print the alignment page. All ink cart

  • Location of the database file "Custom filters" software ScanGear LiDE-210

    Where software ScanGear of LiDE 210 stores the custom filters that are created on the Advanced Mode tab? I use Windows 10 and have a dozen or if the filters that I need to keep and transfer if all goes well for a new 10 Windows Installer.

  • CTRL + O, Ctrl + L, Ctrl + P, Ctrl + A, etc... does not work on my PC.

    CTRL + O, Ctrl + L, Ctrl + P, Ctrl + A, Ctrl + C, Ctrl + V etc... does not work on my PC. All the shortcuts I used to no longer works. I thought I could live with that, but it's really hard when you're used to it. Please help me to solve my problem.

  • Darken a specific string Match (LogFilter)

    I have a string of specific match I need black out for a time determined on a daily basis. We currently have one LogFilter officer set up for that particular log with a match string list that we monitor. There is a single string that I need blackened