WINDOWS ANYTIME UPGRADE IS NOT AVAILABLE IN THIS EDITION OF WINDOWS

Similar Questions

• New want: set group policy not available in this edition of Windows 8?

  Just before I used my recovery on Envy 6 partition I bought less than a month ago, I tried to define group policy in order to take control of my administrator account. I received an error message: "group policy is not a feature of this edition of Windows 8.1."

  I knew My Envy 6 security problems (in my opinion, nothing to envy about it...) since I got it.

  I have known this same problem several times, with different computers, then perhaps it is not just HP.  However, I spent the time shared an office with two of its engineers, who blew me subject my security concerns.

  What happens first, did someone other than I turn my computer and started using my machine as a distributed resource.  When I look at the resource monitor, the memory usage remains at a stable level around 30%; the window of the disk (Disk 0, I presume) remains at about 100%, for several minutes after I started working.  There is evidence that copies of the countless applications are pushed through this channel to an unknown person to me.

  In other words, it's like I had to work in a large company where administrators are able to share my computers memory and storage (and also, copies of programs on my machine) with others.

  Yesterday, I took my machine at Best Buy Geek Squad for the third time since I bought it less than a month ago.  For the first time, they have me seriously on this security issue.  Yesterday, the fourth time I used my security partition, (once I had looked into the Task Manager and saw more than 50 tasks scheduled to run when the machine has been slowed and on current alternative) I decided to see what would happen if I leave the fully charged battery to work.

  What I saw, it was a machine to panic.  I saw a sequence of four first screenshots, then a flash of a task list, and then a series that looked like screen shots again - this time fourteen of them.  I watched it happen to three different times.  Then, the machine made me a 'Capital A administrator' password, which I didn't.

  I looked around resources here and on Windows and discovered that I could access boot options by turning on the machine and pressing the ESC key.  I ran through the list of options there and finally chose EFI, where I finally has two ways to start at an unknown address.  So that's another trick of Geek Squad was in order (I bought their contact service when I bought the machine, what the devil).  This time there was pretty much irrefutable evidence that something was wrong at the level of Internet security.

  I realized that it is way to much information.  I'll ask just once more the question: is it possible that my brand new machine doesn't really have a 8.1 Windows edition that does not include the ability to group policy management?

  Thanks to all who responded here.

  Hi @ElizaDoolittle8

  Thank you for your request, I am happy to help you!

  I understand that you have some security issues. You have taken your computer to the Best Buy Geek squad, 3 times and have used the 4 times recovery partition.

  Only Windows 8 Ultimate and professional have the Group Policy Manager.

  I suggest you do a full restore in the factory.  This will remove all the threats that may be installed.

  If you don't have virus protection, I would say that you install one because it would help.

  Performing a recovery of HP (Windows 8) system

  During the recovery process, you will have an option to backup your personal files to avoid loss.  If you do not have a recent backup I suggest you only do one now.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Here is a link to a YouTube video.  Desktop version of Windows 8 open the Group Policy Management Console

  Here is a third-party link to How to activate 'Group Policy Editor' (gpedit.msc) in Windows 7 Home Premium, Home Basic and Starter Editions? who, according to some readers have worked for them.  You can try it, but I don't know if it works or

  not. (of A? KVG)

  I hope this helps.

• Windows 7 upgrade fails error is "Windows Anytime Upgrade is not in this edition of Windows.

  I have a Toshiba bought in Australia with Windows 7 Home Premium. I bought a key to upgrade to Ultimate, but when I try to run Windows Anytime Upgrade (be it 'Search' or the control panel) I get a message "Windows Anytime Upgrade isn't in this edition of Windows. I can't find anything on the web that helps: each site assumes that you can run Windows Anytime Upgrade! What is a registry problem?

  I have Service Pack 1 is installed, and Windows 7 is activated.
   
  Original title: problem upgrading to Windows 7 Ultimate via Windows Anytime Update

  Take a look at these discussions, the information could help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-is-not-in-this-edition/6945eacd-7376-4437-9efb-51b4d6fe7f7a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-does-not-work-with-Edition/53b5b2c0-CFAA-422C-A638-e6228e0cad41

• update not available with this ID apple after upgrade of the Genius Bar

  I had the Apple Store me level to El Capitan.  Today, my attempt to apply an iPhoto update resulted in response that says: "update not available with this Apple ID.  This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. »

  Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

  Step 1

  If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

  Step 2

  A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

  Step 3

  If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

  If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

  Step 4

  If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. You will be asked for the part number of the DVD.

  Step 5

  In the App Store menu bar, select

  Store ▹ view my account

  Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.

• The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

  has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

  Thank youy

  Hello

  you left in the name of material on

  DM9601 USB to Fast Ethernet card; fix?

  and sorry, but I cannot find a driver for him after XP

  you are also posting in the wrong forum

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  or contact the hardware manufacturer

  they write drivers for their products, not from microsoft

  ______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows Anytime Upgrade was not successful, try again to upgrade - WHY WHY WHY?

  I bought Anytime Upgrade Home Premium Online and I am trying to upgrade.

  Everything is fine - after checking the key, accepted the terms, clicked on the next button and start the system to be upgraded.
  But after a looooooong time, it says "Windows Anytime Upgrade was not successful, please retry the upgrade."  WHY? WHY?  WHY?
  I tried to re-setting level for many times.

  Try to upgrade your Netbook to Windows 7 SP1, then try again the anytime upgrade:

  Learn how install Windows 7 Service Pack 1 (SP1)

• Error message: not available with this Apple ID update

  App Store displays the available updates, but after choosing "Update", the error message starts "Update not available with this Apple ID" appears. All of the applications in question were purchased with the current Apple ID.

  Mac Pro (2008), 10.11.4

  Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

  Step 1

  If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

  Step 2

  A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

  Step 3

  If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

  If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

  Step 4

  If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. If necessary, you will be asked for the part number of the DVD.

  Step 5

  In the App Store menu bar, select

  Store ▹ view my account

  Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.

• "Look for the update is not available at this time. Try again later. »

  I use a Photon on the Sprint 3 G EVDO network. When I open the settings app and click the option to check the software update from Motorola, the following screen appears: "look for the update is not available at this time. Try again later. "When I'm on a Wi - Fi network, a similar message appears (no screenshots):" your device is up to date! No update is necessary at this time. "Can someone please provide more information about what exactly is the message originally in my screenshot below to appear? Thank you for your help.

  

  If you go to Menu > settings > Data Manager > delivery data > social apps > Sync only over wifi. If this box is checked, and that you are connected to 3g / 4g and no wifi, you will get the server is not available because you are not connected to our servers. As soon as you connect to the wifi it reconnect to our servers and see no upgrade is available or an update if one is available. Your phone works as expected.

  Mark

  Support Forums Manager

• PHOTOSMART C410: Not available at this time ink levels. Automatically cancel printing

  When you try to print. Document starts printing then error message appears "Not available at this time of the ink levels" CANCEL PRINTING. The print job is automatically cancelled.

  Result: Prints 1/2 a page then stops. Spit then several pages with one line of numbers, letters and symbols.

  Recently moved to the new HP laptop. I installed driver and software HP several times.

  Connect to the Internet via the VPN

  As you copy it, I suspect that the problem is related to software and how it is communicating with the printer. Let't remove the software completely and install the base to start driver.

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222 - 4.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the Util folder
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec /Unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

  * Note: there is a space between the c and the /.

  If you do not at this stage, use this link to perform another way. Restart Windows install

  1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
  2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
  3. Restart the computer

  Once the computer is restarted, please download and install the driver of base from here: PS_AIO_07_C410_FSW_Basic_Win_enu_140_222.exe

  Please let me know if you can print with the base driver. Thank you.

• The printer does not exist or is not available to this error message. Help, please!

  Hello

  I have a photosmart C310 premium which has been working perfectly.

  It is connected to my computer via wifi. For a few days when I try to print, I get this message:

  The printer does not exist or is not available at this time.

  However, when I go to my homepage of HP printer, it prints the test page and also contacted my printer, if I want to analyze.

  Help, please!

  Thank you

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• e Print not available at this time - error message

  Hi HP

  My LaserJet 1102W works fine in normal circumstances. I can print from my wireless network and reach the appliance.

  But whenever I try to print using Google CloudPrint web, I get a message "e-Print" not available at this time The print job is waiting in my account Google CloudPrint, but prints never.

  It is a relatively new problem. I was able to print documents more than 100 of the clouds in the past, in various locations using Google Cloud Print.

  Any help you can give me would be appreciated.

  Thank you.

  Andrew

  The gateway must be set to the IP address of your router.  DNS can be 8.8.8.8 (DNS googles server) or another DNS server (you can check your other devices on the network for the two parameters).

  If you have a computer Microsoft OS you can get the opring settings a CMD window (type cmd in the Run dialog box) and using the comand "ipconfig/all".  This will give you all the details of IP connection.

  update the settings of printers from the server shipped printer.

• Not available for this device blackBerry smartphones

  I just changed to a bbtorch the 990 and when to transfer my apps I get some that say "not available for this device" like paypal and bbc iplayer. no idea why? need paypal for use with ebay and do not want to lose my use of the internet.

  see you soon

  I guess that the torch from which you changed was running OS 6.  Your new phone is running OS 7.  Just like when Windows comes out with a new version for PC, software developers scramble to get their applications compatible with the new version.  7 OS on phones BlackBerry is very different than the OS 6 for developers must update for her, too.  Apparently, some have not as of yet.  The only thing you can do is to write to each individually and inquire about the timetable for the release of their updated versions.

  I hope that helps you.

• homegroup not available in this version

  Cannot join the homegroup on my rt surface. Is not available in this version of Windows.

  Any ideas?

  It actually says that you can't share your content of the Tablet Surface in the homegroup but you can access other computers in the homegroup of shared content.

• Software used to decode the media not available on this system

  I read a lot on this subject on various sites of forms and failed to find a solution.

  My project is filmed in 1080i @22Mbps and is 2 hours long that I split on two discs... There is NO images or graphics aside a grab single image to roll over the titles, there is some .mp3 and one. WMA file for audio.

  My method of editing, I edited the entire project in a single calendar, so when I get overall even length I it spread over approximately a two-disc length... Disc 2 was made as H.264 blu - ray and any in yet for blu - ray authoring this worked flawlessly, however with disc one I get the error "the software used to decode the media not available on this system...". blah blah blah! »

  I'm working on windows 10 PC with enough RAM and processing power and graphics.

  Can anyone provide a reason or a solution please.

  I rechecked the timeline and there are no gaps or breaks in there, I made the file as H.264 and imported the .mp4 still work but flow is low.

  Thank you

  P.

  Ok.. then MPEG2-Blu-ray has imported and burned to disc correctly... I'll let discs go to the client in this format and hope that its ok for them