Windows backup service is not installed

Similar Questions

• Windows updates - Service is not installed

  Original title: windows updates

  I try to install updates of widows in win 7 Prof but he says that the service is not installed. I tried to activate windows updates but gave an error.

  I am trying to install a wireless printer. Detects the printer it says installation failed.

  Windows 7 and earlier versions

  1. Click Startand then click Control Panel.
  2. Click on Administrative Tools.
  3. In the toolbar to the top of the Administrative Tools window, click the icon for the display list options, and then click large icons.
  4. Double-click Services.
  5. Make sure that the "Background Intelligent Transfer Service" service is running.
     
  6. Make sure that the "Windows Update" service is running.
     

  If the Windows Update service is running, but the service still does not check the updates, click on the number below to go to the article in the Microsoft Knowledge Base:

  306525 how to configure and use automatic updates in Windows

• Windows 7 Ultimate backup service does not work

  I have Windows 7 Ultimate on my computer as a clean install. When I run first the service backup Windows, I get an error message. "The installed service failed due to an internal error. The specified service does not exist as an installed service. "error 0 x 80070424. How can I fix that I can do a backup on my hard drive?

  I have Windows 7 Ultimate on my computer as a clean install. When I run first the service backup Windows, I get an error message. "The installed service failed due to an internal error. The specified service does not exist as an installed service. "error 0 x 80070424. How can I fix that I can do a backup on my hard drive?

  Click Start > run and type services.msc and press ENTER, locate Windows Backup Service in the list. If it is not started, try to run. VP Tech Services

• try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• The Windows Installer service could not access while trying to install Skype

  They advised me to contact my support staff to verify that Windows Installer service is properly registered.  I don't know which is referenced support staff.  Help, please.

  Hello

  Follow this article troubleshooting methods to resolve the problem.

  Problems installing and uninstalling programs on Windows computers

  See also: error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible"

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

• Windows Installer service is not correctly registered

  I need to download. Net3.5 SP1 for TurboTax. When you attempt to load the software, I have to questions that said. NET2 did not work properly. I deleted the file and I try to reintall. NET2 however I get an error windows installer service is not properly registered and won't complete installation. How can I register WIS? I also had BOUNCING messages saying that setup.exe ran in another program, even though I was not running another program. It's somehow connected?

  Windows Installer error, see...

  Blog of Aaron Stebner: TurboTax 2009 can not settle because he thinks of the .NET Framework is not installed, even when it is
  http://blogs.msdn.com/astebner/archive/2010/01/26/9953883.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• The Windows Installer Service could not be accessed

  Original title: I get this message: when you try to install a software like Microsoft Plus! for Windows XP or Microsoft Office 2003, Microsoft Windows XP, you may receive the following error message:

  I can't update my programs or even my anti virus...   I get the following message...

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe
  mode, or if Windows Installer is not correctly
  installed. Contact your support team.

   

  How do I change to run in safe mode Windows... is it still a good thing to do?

  Hello

  Please follow the links below and check the issue:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

  http://support.Microsoft.com/kb/315346#method3

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• Windows xp: services do not start the access denied error 5 or error 1068

  Original title: windows xp: service does not start

  win xp: none of my important services like firewall, DHCP or the server does not start.  Everyone says error 5 access denied or error 1068 could not start dependencies... Please help

  Hello

  1. do you have security software installed on the computer?

  Try the methods provided below and check if the problem persists.

  Method 1:

  I suggest that you disable the security software and then try to start the service and check if the problem persists.

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You will also need to start long-term services and check if that helps.

  To view service dependencies, click the link below.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/srvdep_view_service_dependencies.mspx?mfr=true

  Method 3:

  Check if the computer isn't on selective startup.

  How to configure Windows to use a Normal startup state

  Configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.