Windows backup will fail with the error code: 2147942402

Hello

I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery."

This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data.

The Event Viewer error code: 2147942402

I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key.

I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix.

I'll reformat the USB drive to see if that helps...

Thank you very much

Adrian

Hi Adrien,.

The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Keep us updated on the status of the issue.

Tags: Windows

Similar Questions

  • Windows Update will fail with the error: error code 80072F78

    Original title: windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

    Windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

    Hello
     
    1. who is the software antivirus installed on the computer?
    2 did you have any software or changes to the material on the computer before this problem?
     
    Method 1:
     
    See the steps in the following links.

    How to resolve problems connecting to Windows Update or Microsoft Update

    Temporary connection related errors may occur when you use Windows Update or Microsoft Update

     
    Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
     
    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Method 2:
     
    If the problem persists, see the steps from the link:

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

     
    Registry warning
    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
     
    Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
     
    Hope the information is useful.
  • Error code 464: I'm trying to update my windows but I failed with the error code associated with 464

    IAM trying to update Microsoft Office Service Pack 2

    ·                         http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > download them manually.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    Mick Murphy - Microsoft partner

  • Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

    Hello

    I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
    Thank you

    Hello

    System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

    You can find newspapers by accessing this folder.

    c:\Windows\logs\cbs\checksur.log

    I would suggest trying the following steps and check.

    Method 1:

    Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

    I would have you look at the article-

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2-

    I would have you look at the article-

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997#appliesTo

    Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

    Proceed at your own risk.

    In addition, see the reference article-

    Problems with installing updates

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

    Answer if you need more information on this, and we will be happy to help you.

  • Windows Update KB968930 fails with the error code 800F080D

    For the last week I have "been trying to install this update, Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) and the installation fails, with error code 800F080D. I am always prompted to install it. Is there a resolution? Meanwhile a few other updates when the installation was successful. Thanks in advance!

    Hi MariMaraki,

    If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

    You can check the link and try to use the system analysis tool and check.

    Windows Update error 8024200d

    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

    This also applies to Windows Vista.

    After you run the tool, try to install the update manually and check.

    See the link to download the update:

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=f2fa1227-9a34-4E29-AA03-62f5c00e16f2&displaylang=en

  • Windows Update KB968930 fails with the error code 80070026

    Windows Update fails to load after the creation of a restore point. Someone at - it guess why?

    The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow.

    I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem.

    You can try to follow the given article:

    http://support.Microsoft.com/default.aspx/KB/936212>

    NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it:

    You can also try the following article to reset Windows Component Update:

    http://support.Microsoft.com/kb/971058>

    ~ or ~.

    I would recommend that you...

    Launch a collateral request for assistance free Windows Update:

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

    Support for Windows Update:

    http://support.Microsoft.com/GP/wusupport>

    --

  • XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE

    OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor

    I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack

    I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed?

    I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE.

    Thank you

    TMcC

    Problem solved!

    Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date.

    I will me BEDTIME!

    Thank you guys for the entries.

    Tom

  • Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

    Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

    Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

    My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

    Moved from Vista to install, upgrade and activate Forum.

    Hello

    Try to download the update and save it to your desktop

    Close all windows/Applications

    Right-click on the file and select run as administrator

    If that fails, run the system update tool

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us

  • Windows Update always fails with the error code 80072f8f (Windows vista SP2).

    All directings on assistance to this error page in fact and not solved the problem.

    When you try to synchronize the clock as instructions say this fails also.

    Internet Explorer says invalid certifocates on microsoft support pages.

    It is a clean installation, everything that is on the machine is Vista SP2

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072f8f/945f3ec1-8bac-4c10-A54E-1e564d18c37e

    03:37:1108/01/11

  • KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

    Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

    Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

    3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

    5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

    How will I know if my computer is up to date?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Backup fails with the error code 0 x 810000005

    Original title: error codes 810000005

    Backup fails with the error code 0 x 810000005

    Hi ElaineKingsley,

    ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

    ·         To the place where you are performing the backup?

    ·         Not him enough not space is available to perform the backup?

    I suggest you do the check disk (chkdsk) to the backup location.

    Check the hard disk for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

    If the error code is 0 x 81000005 see link for resolution below:

    http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

    Hope this information helps.

  • Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

    The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

    Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

    Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

    Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

    Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

    How to run Checkdisk at startup CHKDSK

    http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

    Run SFC/scannow

    File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

    WHY: You want to ensure that the base operating system files have not been damaged or changed.

    How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

    http://www.Vistax64.com/tutorials/66978-system-files.html>

    04/01 / 1107:15: 20:00

  • When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

    Identification of customer's Windows 7 NFS UID GID information

    I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

    The NFS Client operating system: Windows 7 Ultimate, 64-bit

    Data captured by Wireshark

    MOUNT V1 EXPORT call 3rd party client
    Identification information Flavor: AUTH_UNIX (1)
    Length: 32
    Stamp: 0xc7065970

    Machine name: PC
    UID: 1000
    GID: 1000

    MOUNT V1 EXPORT appeal of the NFS client
    Identification information Flavor: AUTH_NULL (0)
    Length: 0

    It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

    Hello VDAEMP,

    As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
    TechNet - Windows Server
     
    Thank you

  • Home Vista premium: KB978338 fails with the error code 80004005

    Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

    Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

    Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

    Hi gbislay,

    I think that you are able to get on the desktop after changes have been restored.

    Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

    The system update tool

     

    Step 3: Clean boot the computer

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

    Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

    You can see the steps outlined in the article below, which deals with a similar question

    Windows Update error 800f0826

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

     

    Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

    Thanks and greetings
    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • OPatch failed with the error code 74

    Hello

    I'm on 12.0.4 & database 10.2.0.5.0 - 64bi.

    I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.

    History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt

    Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
    Prior running check...
    The prerequisite checking 'CheckApplicable' failed.
    The details are:
    Patch 5910901 : Required or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, newer version found 10.2.0.5.0]
    ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
    System intact, OPatch will not attempt to restore the system

    OPatch failed with the error code 74

    Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, the forms and the Apache.

    Below was the action plan provided by Oracle earlier.

    1. download and apply Patch 5910901 to a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.

    2. you can also use the 10.2.0.4 ojdbc14.jar is file.

    How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.

    Ask for your help.

    Kind regards
    DBApps

    I'm on 12.0.4 & Database 10.2.0.5.0 - 64bi.

    I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.

    History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt

    Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
    Prior running check...
    The prerequisite checking 'CheckApplicable' failed.
    The details are:
    Patch 5910901: necessary or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, most recent version 10.2.0.5.0 found.]
    ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
    System intact, OPatch will not attempt to restore the system

    OPatch failed with the error code 74

    Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, forms & the Apache.

    Below was the action plan provided by Oracle earlier.

    1. download and apply the Patch 5910901 for a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.

    2. you can also use the 10.2.0.4 ojdbc14.jar is file.

    How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.

    Ask for your help.

    You are on 11.2.0.5 and the patch is available for versions 10.1.0.5 and 10.2.0.2 10.2.03 you do not need to apply this hotfix.

    According to (ORA-600 [kwqicgpc:cursta] [139200.1 ID]), this bug is fixed in 10.2.0.4 If you're on 10.2.0.5 you don't need to apply this patch that is included in the version of your database.

    Please log an SR for this error if (search tool error ORA-600/ORA-7445/ORA-700 [153788.1 ID]) does not help.

    Thank you
    Hussein

Maybe you are looking for

  • longer the officejet work optional paper tray with the officejet pro 8500 a 7410?

    I just bought a HP Officejet Pro 8500 has more. Can I use the papar second drawer of the Officejet 7410 with it?

  • CYC can be used for several measures thermocouple?

    Hello I intend to use a PCI 6221 with the SCB-68 to 3 temperature measurements (2 on a surface of copper that will be controlled at 40 ° C) and 1 for air at 20 ° C using thermocouples T and cold welding of the SCB-68 Compensation. From what I underst

  • footprint of not deleted

    One of my prints in Multisim disappeared recently, using 10 Multisim and Ultiboard the fault has occurred after the change of the footprint of a standard 2 x 8 Pin Header and attribute that to a print of my own design (succeeded in Ultiboard) the hea

  • Not able to install Adobe Flash Player

    close live messenger I NEED TO CLOSE LIVE MESSENGER TO INSTALL ADOBE FLASH PLAYER?   I DID EVERTHING BUT "LIVE MESSENGER IS OPEN, IT IS VERY ANNOYING, PLEASE HELP ME I JUST WANT IT ACTIVE A VIDEO AND I NORMAND TO INSTALL ADOBE.

  • Loading photos on the phone from the computer?

    Hi, I think to buy the Razr V8, and I was wondering if anyone can tell me if it is possible to download pictures from the pc to the phone via the usb port and if yes is it easy, and what is the quality of the image displayed? It also comes with a rem