Windows can't check for updates, update history lists all updates but updates installed tells me that I have no updates installed.

Hi, I use Win Vista Ultimate 32-bit sp1.  I have KIS2009, A Squared Anti Malware, MalwareBytes Anti Malware installed.  All showing my system is clean.  I ran MSRT analysis to light, and he pointed out that my system is clean also.

The problem
When I connect, I get a balloon in the notification area telling me that "windows cannot check for updates.  Opening of update of Windows and do it to check a windows update updates it just go and research without results.  It justs keep checking, but I get no error.  Lists history of update Windows Defender updates the last today, 06/09/09.  All updates prior to this are Windows Defender until 28/04/09.  At this time I have installed 15 updates, including some Office updates.  Click on installed updates and finally I said that there is no update at all?:

What I tried
I disabled my firewall and tried again.  No luck :(

Tried a point files, but apparently I don't have?  I should have, but there is none there.  Install Win7 RC on a different partition, would this have wiped my restore points? I remember Vista made this for XP, but assumed that this would have been resolved with Win7.

I tried to install Win Vista sp2 but unfortunately, I installed the Russian language (don't know why I, I was annoyed a day) but the sp2 download in five languages and Russian is not one of them :(

So I tried to do a search on it.  Came across various inscription mention deletion of registry keys.  Only problem is that I have not mentioned keys.  Some keys were supposed to be in the components of HKLM, sorry can't remember the others.

Find this site, I tried the FIX tool, reset Windows Update.  He ran not aggressive and he made the restoration, request for permission to UAC thingy, then the progress bar moves to the right and nothing else happens.  Restarted exciting tried and the same thing happens.  Been sitting there for more than two hours and no results.

I checked services.msc.  I have BITS began, was automatic but have updated the manual according to the instructions contained in the ' automatic updates can be turned off "at the top of the forum.  Update of Windows, The Windows event log and Software Licensing Service are all set to automatic, and running.

Windows Update log shows the following:

2009-06-09 19:09:25:462 1520 1318 Agent warning: has no rule Installed, updateId = {B02D2701-EFE6-4CC3-A434-FFD9B029F750}.100, hr = 80070002
2009-06-09 19:10:34:647 1520 1318 Agent warning: is not Installable rule, updateId = {B02D2701-EFE6-4CC3-A434-FFD9B029F750}.100, hr = 80070002
2009-06-09 19:12:56:989 1520 1318 Agent warning: has no rule Installed, updateId = {1884967F-0853-44CD-8247-4AE9E97E3803}.100, hr = 80070002
2009-06-09 19:14:10:241 1520 1318 Agent warning: is not Installable rule, updateId = {1884967F-0853-44CD-8247-4AE9E97E3803}.100, hr = 80070002
2009-06-09 19:16:29:371 1520 1318 Agent warning: has no rule Installed, updateId = {835AEBB1-9A4E-44CD-9415-0BF0744378D0}.100, hr = 80070002
2009-06-09 19:17:34:769 1520 1318 Agent warning: is not Installable rule, updateId = {835AEBB1-9A4E-44CD-9415-0BF0744378D0}.100, hr = 80070002
2009-06-09 19:19:53:027 1520 1318 Agent warning: is not Installed, updateId = {1A3A237B-486A-4965-A5D1-999416F40191} rule.102, hr = 80070002
2009-06-09 19:21:03:898 1520 1318 Agent warning: is not Installable rule, updateId = {1A3A237B-486A-4965-A5D1-999416F40191}.102, hr = 80070002
2009-06-09 19:23:17:820 1520 1318 Agent warning: has no rule Installed, updateId = {152709D3-D663-4C46-B8C6-31498E11692E}.103, hr = 80070002
2009-06-09 19:24:26:158 1520 1318 Agent warning: is not Installable rule, updateId = {152709D3-D663-4C46-B8C6-31498E11692E}.103, hr = 80070002
2009-06-09 19:26:43:400 1520 1318 Agent warning: has no rule Installed, updateId = {DA83283A-4A36-43CB-A7DD-717885E03373}.100, hr = 80070002
2009-06-09 19:27:56:013 1520 1318 Agent warning: is not Installable rule, updateId = {DA83283A-4A36-43CB-A7DD-717885E03373}.100, hr = 80070002
2009-06-09 19:30:11:756 1520 1318 Agent warning: has no rule Installed, updateId = {8893E665-1514-4A23-B6EB-E45376B12610}.101, hr = 80070002
2009-06-09 19:31:14:801 1520 1318 Agent warning: is not Installable rule, updateId = {8893E665-1514-4A23-B6EB-E45376B12610}.101, hr = 80070002
2009-06-09 19:33:33:793 1520 1318 Agent warning: has no rule Installed, updateId = {C0A06671-C3EC-4A02-B22C-9395A802548A}.100, hr = 80070002
2009-06-09 19:34:40:576 1520 1318 Agent warning: is not Installable rule, updateId = {C0A06671-C3EC-4A02-B22C-9395A802548A}.100, hr = 80070002
2009-06-09 19:36:52:233 1520 1318 Agent warning: has no rule Installed, updateId = {462BC0AA-53AB-4DE0-AA12-6A6BA13F946C}.100, hr = 80070002
2009-06-09 19:37:58:933 1520 1318 Agent warning: is not Installable rule, updateId = {462BC0AA-53AB-4DE0-AA12-6A6BA13F946C}.100, hr = 80070002
2009-06-09 19:40:04:534 1520 1318 Agent warning: has no rule Installed, updateId = {DE040314-4AF9-44A1-A08E-B36E0F350CE2}.100, hr = 80070002
2009-06-09 19:41:09:853 1520 1318 Agent warning: is not Installable rule, updateId = {DE040314-4AF9-44A1-A08E-B36E0F350CE2}.100, hr = 80070002
2009-06-09 19:43:18:343 1520 1318 Agent warning: has no rule Installed, updateId = {313C8158-B0D7-41E8-A95E-06CACF808DC9}.101, hr = 80070002
2009-06-09 19:44:22:693 1520 1318 Agent warning: is not Installable rule, updateId = {313C8158-B0D7-41E8-A95E-06CACF808DC9}.101, hr = 80070002
2009-06-09 19:46:38:698 1520 1318 Agent warning: has no rule Installed, updateId = {736D69E8-AE0A-43F3-AB81-684A76DFCB76}.101, hr = 80070002
2009-06-09 19:47:50:519 1520 1318 Agent warning: is not Installable rule, updateId = {736D69E8-AE0A-43F3-AB81-684A76DFCB76}.101, hr = 80070002
2009-06-09 19:50:03:582 1520 1318 Agent warning: has no rule Installed, updateId = {936F0B44-C846-40BA-9FC9-D710759708CD}.101, hr = 80070002
2009-06-09 19:52:01:785 1520 1318 Agent warning: is not Installed, updateId = {F200C6C7-A178-4DF7-B491-12E8D4D3AD52} rule.102, hr = 80070002
2009-06-09 19:52:58:214 1520 1318 Agent warning: is not Installable rule, updateId = {F200C6C7-A178-4DF7-B491-12E8D4D3AD52}.102, hr = 80070002
2009-06-09 19:54:54:313 1520 1318 Agent warning: has no rule Installed, updateId = {0CFBE648-D8B4-495E-8671-73981EA7185A}.101, hr = 80070002
2009-06-09 19:55:54:479 1520 1318 Agent warning: is not Installable rule, updateId = {0CFBE648-D8B4-495E-8671-73981EA7185A}.101, hr = 80070002
2009-06-09 19:57:48:021 1520 1318 Agent warning: has no rule Installed, updateId = {7E3F49B2-DE7E-4296-BA5B-F989FCD368B4}.100, hr = 80070002
2009-06-09 19:58:47:831 1520 1318 Agent warning: is not Installable rule, updateId = {7E3F49B2-DE7E-4296-BA5B-F989FCD368B4}.100, hr = 80070002
2009-06-09 20:00:52:678 1520 1318 Agent warning: has no rule Installed, updateId = {511942F6-A887-414F-938C-860FFDD8E0BE}.101, hr = 80070002
2009-06-09 20:01:55:245 1520 1318 Agent warning: is not Installable rule, updateId = {511942F6-A887-414F-938C-860FFDD8E0BE}.101, hr = 80070002
2009-06-09 20:03:53:470 1520 1318 Agent warning: has no rule Installed, updateId = {6B7CD081-8091-438F-A74E-0C7140CDF258}.101, hr = 80070002
2009-06-09 20:04:51:247 1520 1318 Agent warning: is not Installable rule, updateId = {6B7CD081-8091-438F-A74E-0C7140CDF258}.101, hr = 80070002
2009-06-09 20:06:49:001 1520 1318 Agent warning: has no rule Installed, updateId = {5550D892-A28D-433F-B6E0-2F1E191ABDC9}.100, hr = 80070002
2009-06-09 20:07:50:869 1520 1318 Agent warning: is not Installable rule, updateId = {5550D892-A28D-433F-B6E0-2F1E191ABDC9}.100, hr = 80070002
2009-06-09 20:09:47:511 1520 1318 Agent warning: has no rule Installed, updateId = {5823AA12-8424-4D21-8DAD-6DA4A75B20E7}.100, hr = 80070002
2009-06-09 20:10:42:362 1520 1318 Agent warning: is not Installable rule, updateId = {5823AA12-8424-4D21-8DAD-6DA4A75B20E7}.100, hr = 80070002
2009-06-09 20:12:41:491 1520 1318 Agent warning: has no rule Installed, updateId = {658F3DA6-E37A-4678-984A-6965D84928F6}.100, hr = 80070002
2009-06-09 20:13:44:961 1520 1318 Agent warning: is not Installable rule, updateId = {658F3DA6-E37A-4678-984A-6965D84928F6}.100, hr = 80070002
2009-06-09 20:15:43:481 1520 1318 Agent warning: has no rule Installed, updateId = {74B4A904-58C1-423C-B12F-F6C8499BB431}.100, hr = 80070002
2009-06-09 20:16:42:445 1520 1318 Agent warning: is not Installable rule, updateId = {74B4A904-58C1-423C-B12F-F6C8499BB431}.100, hr = 80070002
2009-06-09 20:18:41:246 1520 1318 Agent warning: has no rule Installed, updateId = {A88F5458-4936-4859-B60D-97E42F169964}.100, hr = 80070002
2009-06-09 20:19:40:228 1520 1318 Agent warning: is not Installable rule, updateId = {A88F5458-4936-4859-B60D-97E42F169964}.100, hr = 80070002
2009-06-09 20:21:33:489 1520 1318 Agent warning: has no rule Installed, updateId = {D760D61F-1684-4B14-A93F-DC76B285E90F}.101, hr = 80070002
2009-06-09 20:22:32:517 1520 1318 Agent warning: is not Installable rule, updateId = {D760D61F-1684-4B14-A93F-DC76B285E90F}.101, hr = 80070002
2009-06-09 20:24:32:922 1520 1318 Agent warning: is not Installed, updateId = {7B09DEC4-4EEB-4778-A9B8-695B1FDD8D5B} rule.102, hr = 80070002
2009-06-09 20:25:34:578 1520 1318 Agent warning: is not Installable rule, updateId = {7B09DEC4-4EEB-4778-A9B8-695B1FDD8D5B}.102, hr = 80070002
2009-06-09 20:27:42:707 1520 1318 Agent warning: has no rule Installed, updateId = {B034622F-57C7-42C9-A7FB-ED3037128B14}.101, hr = 80070002
2009-06-09 20:28:38:864 1520 1318 Agent warning: is not Installable rule, updateId = {B034622F-57C7-42C9-A7FB-ED3037128B14}.101, hr = 80070002
2009-06-09 1520 173 20:30:15:301 c to THE trigger to THE detection via API DetectNow
2009-06-09 1520 173 c. 20:30:15:301 to THE will make the current sensing end detection
2009-06-09 20:30:44:091 1520 1318 Agent warning: has no rule Installed, updateId = {08E30185-E7CE-4D1B-950C-F8A8A405B0F3}.101, hr = 80070002
2009-06-09 20:31:41:476 1520 1318 Agent warning: is not Installable rule, updateId = {08E30185-E7CE-4D1B-950C-F8A8A405B0F3}.101, hr = 80070002
2009-06-09 20:33:41:376 1520 1318 Agent warning: has no rule Installed, updateId = {3EDF9508-B8FE-4ACD-9B59-135D503F2B85}.100, hr = 80070002
2009-06-09 20:34:36:095 1520 1318 Agent warning: is not Installable rule, updateId = {3EDF9508-B8FE-4ACD-9B59-135D503F2B85}.100, hr = 80070002
2009-06-09 20:36:38:753 1520 1318 Agent warning: has no rule Installed, updateId = {CD5D1875-5AB6-4437-83A3-E74BEFED8256}.104, hr = 80070002
2009-06-09 20:37:40:916 1520 1318 Agent warning: is not Installable rule, updateId = {CD5D1875-5AB6-4437-83A3-E74BEFED8256}.104, hr = 80070002
2009-06-09 20:39:41:279 1520 1318 Agent warning: has no rule Installed, updateId = {2C5B37D4-6912-4D00-B005-ECE69EA8F5BF}.101, hr = 80070002
2009-06-09 20:40:40:934 1520 1318 Agent warning: is not Installable rule, updateId = {2C5B37D4-6912-4D00-B005-ECE69EA8F5BF}.101, hr = 80070002

Don't understand any of this.

Any notice received with gratitude.

Martin,
Thanks for your help so far.  I hope you don't mind but today how that spending (hard day @ work) I think I'll leave the installation of repair until tomorrow.  More that likely the disc would have burst in the player, causing a sort of spike power was so my motherboard.  So I think I'll just relax tonight and I hope tomorrow is a day better.  Hope you have a good.

See you soon

Tags: Windows

Similar Questions

  • Windows can't check for updates 80244019 error code.

    I have a problem, the system is vista home basic. Windows can't check for updates 80244019 error code. I have read many of the forms and ran from bugs that I found from microsoft. Further investigation indicates the RPC and DCOM service Launcher are grayed out and cannot be started or stoped.   Registry settings look good for the RPC service.  The DCOM service depends on RPC service.  In the GUI at the same time say they are started but from the comand prompt, I run the command net start and neither one is registered as running.  Any help would be appreciated.

    Thank you

    Hello

    (1) did you make any changes before the show?

    See the link below:

    Method 1: The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    Method 2: Windows Update error 80070422, 80244019, or 8DDD0018

    http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

    Method 3: You can start the online virus scan and check.

    How to remove a computer virus?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Let us know if that helps.

  • My automatic updates Windows Vista do not work? Error: Windows can't check for updates

    original title: My automatic Windows Vista updates do not work?

    My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

    I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

    And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

  • Vista Home Premium - icon shows "windows can't check for updates.

    Recently, the icon of update in the system tray is always present and displays the message "windows cannot check for updates.  However, updates are always being informed when they are available (finally been windows 06/06/09 update of Defender), but may not be installed until I have shut down the machine.

    Manually check the updates just - scans without any reported results.

    Any help would be appreciated

    Hi Graeme1962

    To exclude a malware infection.  You can use the tool that is located at the following link
    http://www.Microsoft.com/security/malwareremove/default.mspx

    Also, take a look at this Article
    http://support.Microsoft.com/kb/947821

    Please post back the results

    Ken
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows can't check for updates

    I have windows vista and it cannot check the updates.  I got an error 8007007A code.  I searched online, nothing helps.  Help!

    ·         I have Bajmaj,

    Thanks for posting on the Microsoft answers Forums
    Doing some research I found this:
    "0x8007007a: the data area passed to a system call is too small."

    CAUSE
    This problem occurs because the buffer that stores the account information for all scheduled tasks is limited. the buffer puts a limit on the number of jobs that you can plan with user credentials. There is no limit on the number of jobs that you can create without user credentials.
    RESOLUTION
    To work around this problem, stop and start the Task Scheduler service, wait 10 to 15 minutes and then to schedule tasks. »

    Click on start, type bar, the serviceand select the services since the research gives search icon.
    find Task Scheduler service right click top and select stop, wait 15 seconds, then right-click again and start to it.
    Then try to update again.
    Do you have service pack 1 SP1?

    Please post back and let us know if this information was useful or if you are still needing help.

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows update bubble icon with "Windows can't check for updates.

    I can access it through the icon, but when I click on Start scan, I get a message error that says "Windows could not search for new updates. An error occurred when the new updates for your computer.  «Errors found: Code 80080005 Windows Update encountered an unknown error "below which shows"last check"2009-10-03 &" updates installed on 03/05/2011 ".»  I tried Mr. Fix It, but no luck.  I also tried other suggestions of support for MS, but it still doesn't seem to work.  Does anyone have a suggestion or two?

    Hello
    1. what support MS suggestions have tried so far?
    You can reset the Windows components and see if it works fine.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    See also:

    You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

    http://support.Microsoft.com/kb/910337

  • I get "Windows can't check for updates" everytime I try I get a "an error occurred" why I can't get this to work?

    I can't get updates at all. I did have one in 2 weeks because the automatic update can not pass for some reason any... Does anyone have this problem before?

    CharlesPyle,

    Suggest that you first spread malware as the cause of the problem by following these steps:

    (1) have your system scanned by the antivirus/security suite installed.
    (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

    If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

    How to reset Windows Update http://support.microsoft.com/kb/971058components >

    Suggest you download and Save it. Then, close all the open programs and web browsers.
    Run Microsoft Fixit50202.msi and choose its default mode.
    After that he finished the race, see if the return code is displayed again when looking for updates.

    If not, then run the Fixit once more and choose his Aggressive mode.
    Restart once it is finished and see if the return code always appears when the updates.

    IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

    06/20 / 1109:22:48

  • Windows can't check for updates, error 80070409. How can I fix it

    What should I do?

    Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    How about 80070490error?

    With the kind permission of Update Services MVP TaurArian:

    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    http://support.Microsoft.com/kb/931712 ["says SFC / Scannow ']

    A repair install is the usual solution of SFC/scannow does not work.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    NB: If you have installed SP1 for Vista see http://support.microsoft.com/kb/948537

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

    Uninstall SP1

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • my windows can't check for updates, I have a few critical updates that must be how to fix this?

    I tried troubleshooting and it seems just to send me to microsoft and I can't find the answer there.  It does not give me a code or anything either, it's just when I run my mouse over the Update icon in the lower right of the screen.  I just tried to install it and it gave me the code 80072EFD

    I tried troubleshooting and it seems just to send me to microsoft and I can't find the answer there.  It does not give me a code or anything either, it's just when I run my mouse over the Update icon in the lower right of the screen.  I just tried to install it and it gave me the code 80072EFD

    See if this article will help you to solve the problem:
    Windows Update error 80072efd
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

    t-4-2

  • I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay fo

    I tried to insert a password to protect a document that I send. He told me to add a service that I paid for. I'm still not able to protect document and install a password. I went to tools-Protect but he always tells me that I have to pay for this service after I did. How can I add a password to open my document?

    Hi cj47163119,

    You need Acrobat application to secure your document with password. It seems that you use Acrobat Reader.

    Acrobat Reader is a free service and do not have this option.

    If you have Acrobat subscription, you can download it here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

    For more help, see this KB doc: Security with passwords, Adobe Acrobat PDF files

    Kind regards

    Meenakshi

  • After the removal of the malware, I can't check for updates or download files of definition of

    I bought a PC with Windows XP Professional. He has been infected with 5 different Trojan horses, a backdoor and other malicious software. I cleaned the computer but found that I can't download Security Essentials definition updates or even can I search for updates by using Windows Update.  It gives an error saying that there is a problem with the network connection. Otherwise, I can access internet and download, and the only remaining issue was when Java gave me a prompt to download a update of the skipped upward same error box. While the computer has been infected, it actually blocked access to the internet and I couldn't access it at all so I think that the malware must have corrupted one or several files somewhere along the line. Unfortunately, I don't have the original XP system disk to perform an upgrade on the spot to restore the files. If anyone has ideas on how I could fix this problem before reloading the operating system, it would be much appreciated. Thank you.

    I will be reload the OS so I have my answer to this question. Please, if anyone wants to add anything don't hesitate not, but if you insist on patronising pass to the next thread to exercise your "superiority". Thank you.

    You can trust in the security of any computer used until you have formatted the HARD drive & then did a clean install of Windows. Period, end of story.

    Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

    If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Note: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

    Wish I had better news for you.  Good luck!

  • HELP get the Update Error 80070426 tirelessly... "WindowsUpdate Error 80070426" "WindowsUpdate_dt000" - I can't check for updates or download windows updates.

    Hi all

    First time here.  Relentlessly, I get 80070426 error when I try to download the latest urgent/updates Windows Update recommended.  This has happened for weeks.  I scanned with Malwarebytes & Avast... find scans nothing.  I saved and run mbam and avast to disc... still nothing is found.

    My windows preferences are defined on notify me when the urgency and recommended updates are available for download.  I passed this automatic download and prompt me to install updates to day... it doesn't matter... I still get the same error.  When I click search for updates, I get a MSG "windows update has encountered an unknown error."  When I go after "Get help with error," help Windows results pulled up to... "WindowsUpdate_Error_80070426" "WindowsUpdate_dt000"

    I even recorded my copy of windows again... I bought Sony computer with windows installed.

    I have the Sony support for these questions... but I really want to sit on the phone with someone who plays a standard solution... format that does not work... only for transfer to the expert support.

    I'd appreciate any help that can be provided to this forum.  Anyone? Ideas?

    Thank you

    Try: How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    Restart and try WU.

    TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Top desktop PC. OS: Vista Ultimate sp2. Error code "Windows can't check new updates" message "800f080d".

    I tried all of the suggestions for help with this error! Still no relief. Please notify. Thank you, in advance,

    Moe723

    Hello

    1. have you plugged all third-party devices other than the keyboard and mouse?

    2 have you made changes on the computer before this problem?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and check if that helps.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Method 2:

    Run the system update readiness tool and check if that helps.

    Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/?kbid=947821

    Method 3:

    Run the scan tool (SFC) System File Checker and check if it helps.

    How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

    And also disconnected all external devices except the mouse and keyboard and then try to check for the updates.

    Hope the information is useful.

  • Windows Update can't check for updates

    I get a pop up window saying that windows cannot check updates (code 80070643). I have windows vista family premium and running a 32-bit, with trend micro. How can I solve this?

    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
    http://support.Microsoft.com/kb/958052
    TaurArian [MVP] 2005-2010 - Update Services

  • If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

    I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding

    Windows can't check for updates, error code 800FFFF.

    I tried some of the recommendations varied on this site, but so far without success.

    If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

    I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

    I checked for malware and repeatedly tried to system update readiness tool.

    Any thoughts?

    Some information on my system:

    OS: Vista Edition Home Premium
    Version: 6.0.6002 Service Pack 2 Build 6002
    Model: Inspiron 1525
    System type: X 86-based PC
    Processor: Intel Core 2 DUO CPU
    The version of the BIOS/date: Dell Inc. A16, 16/10/2008
    SMBIOS Version 2.4

    Hello Jason.

    I suggest you try the following:
     
    close and exit all the open documents or windows program you have open.
     
    Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
    [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
     
    Note => for best results, check the option to remove personal settings.
     
    NEXT
    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
     
    1B. make disappear/close the pop-up window "automated troubleshooting! -then...
     
    c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

    2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
    When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
     
    If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
    Those that are marked as "optional" decline.
     
    Have infinite patience so that it scans and it's work.
     
    When you are prompted to restart Windows, please do. Allow it to restart.

    If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

    Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

Maybe you are looking for

  • iPad delete mail folders. Can I restore?

    II already asked this previously. I can restore iPad FILE MAIL, I tried hard formidable mail "cannot move message. the. Find that all files have been deleted.

  • How do I make pop up windows back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window opens. That's good, that's what I wanted. They always opened up on the left side of the screen. However, they now open in the middle of the screen. It's already happened and the screen finally opened completel

  • Official section of windows 7?

    It was officially released windows 7, lay down the section continues with Windows 7 or Windows 7 beta? Saludos amigos

  • Satellite A500-134 - plugged in but not charging

    Toshiba Satellite A500-134Purchase date: 03/02/2010Operating system: win 7 32 Hello, good evening, my laptop worked fine until a few days ago, when stop you it immediately after I removed the charger adapter. When I reinserted the card once again, I

  • Return to the last code position

    When I am looking through a structure of great event or matter to study the LabVIEW code, it would be useful to be able just to go back to the last position within the code. (as in c# with "STRG +.") Even better would be to go back along the history