Windows cannot communicate with the device he resourse (primary DNS server).

Original title: primary dns.

Help, please

Windows cannot communicate with the device he resourse (primary DNS server)

Please help me solve this problem

If you see a 'FON' signal wifi on your PC and you have signed up to "FON", you should be able to connect to it.

If you look on your BT router (or router you pay BT for the primary connection) on its homepage it should show something like "State of the Wifi BT. If it is active, you should be a member "FON", if it is not active then you need to register and agree.

BT has their own support forum if you have not already tried it - https://community.bt.com/

See the FAQ here - http://www.btfon.com/support to ensure that you are connected properly.

in particular:

How can I connect once I connect to the correct Wi - Fi network?

Once you are connected to the correct wireless network, launch your browser. This should load the Fon login page. Select Fon among the three options on the login page, enter your e-mail address and password and sign in. Launch another browser and you are ready to access the Internet

Tags: Windows

Similar Questions

  • Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

    Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

    Hi Rachel,

    I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

    • Using a cable or a wireless Internet connection?

    DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

    I suggest you to follow the methods in this article and check if it helps.
    http://support.Microsoft.com/kb/2779064/en-us

    Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

  • Windows cannot communicate with the device or resource (primary DNS server)

    I have Windows 7 and quite often when it looks like I'm connected, but I can't go anywhere on the internet, I have run the diagnostics and I get the message that Windows does not recognize that I am connected.  This started happening about a month.   Sometimes, if I refresh the connection, it works. Sometimes I reboot the radio (I'm on an antenna system) and the ethernet is hard plugged into my lap and then it will work.  But the problem persists.

    I want a permanent solution to this problem

    Thank you

    Hello cicada.

    Thank you for your reply,

    To help solve your problem better, could you give us the following information?

    1. Your computer is connected to a domain network?

    I suggest you to disable any third-party firewall/antivirus that can cause this problem. I suggest to temporarily disable the firewall/antivirus and check if it helps.

    Please get back to us with useful information to help you better.

    Thank you

    In response to 1. ... Not that I know

    I'll have to think about whether I want to disable McAfee. I is not comfortable to feel online without anti virus or firewall... actually it's scared the * out of me. I'll see if I can find a way to do and do not get slammed with * from the Internet

    Well, Mr. Ameen, I disabled the McAfee Firewall in favor simply by using Windows Firewall. I made this 3 days ago and I have not had the problem since then, so I'm blaming McAfee.  I wonder if they'll believe me when I tell them and tell them in as nice a way as I can: D.
    Thank you!!!
    Kathie

  • Cannot communicate with the device or resource - primary DNS server

    I have problems with my laptop using windows 7.
    I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
    Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
    I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
    I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
    I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
    Thank you.

    Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

    Thank you again... Success!

  • Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

    Original title: internet connection problem

    Hey,.

    I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

    1. Windows cannot communicate with the device or the reaource (primary DNS server)

    2. the connection between the Internet and your access point, router or cable modem is broken

    3 problem with access point or wireless adapter

    I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

    Hello Hildegard Lydia,

    You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

    What is the brand and model of your computer?

    Please follow the steps mentioned below:

    Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
    I suggest you try to reset the TCP/IP stack.
    http://support.Microsoft.com/kb/299357

    Method 2:

    I suggest that you refer to the following link:

    Why can't I find a wireless network?

    http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

    Method 3:

    See the steps in the following link and check:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Please an update on the status of the issue to help you further.

  • Software BlackBerry Blackberry link cannot communicate with the device (Z10 and MacBookPro)

    I've just updated my Z10 software to version 10.0.9.2372 by link of BlackBerry OS on my MacBook Pro, and since that time, I can't get the link to communicate again to my Z10. Even an attempt to "Restore the device" is insuccessful as the error: "canoe repair of error" appears during the process. (Believe me, it is the real spelling of this error message!) can anyone suggest a solution? (Yes, I re-installed the link on my mac, rebooted the phone numerouis times, disconnected and re-connected the USB cable, without success.)

    Problem solved! I found that link to 79 BlackBerry update build on my MacBook Pro, I am now able to connect to my Z10.

    I hope this helps those who have the same problem.

  • BlackBerry software can not connect to the Blackberry link (cannot communicate with the device)


    -Very well, no body does help.

    I solved it myself: disable the automoatic driver installation in 'device and printer.

  • Windows cannot communicate with devices or resources

    original title: novatel wireless ovation usb mc769

    Sometimes, using my wireless, novatel, this message will appear as a troubleshooting tool:

    WINDOWS CANNOT COMMUNICATE WITH THE DEVICES OR RESOURCES (MAIN DNS SERVER)

    What does that mean?  I have to update a program?

    Hello

    You can try to follow the steps mentioned by Shekhar S published on Tuesday, February 9, 2010 19:41 to fix the problem:

    http://social.answers.Microsoft.com/forums/en-us/w7network/thread/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  • What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

    Hello

    I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

    I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

    After about 40 min (depends on the amount of data in) I get this error:

    (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

    What are the causes of this error?

    Thanks in advance,

    Aviad

    Hello aviadCielo,

    When you get this error, what does do to make it work again? If you restart your program, start all this work?

    Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

    Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

  • The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

    The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

    1. ensure that the printer is powered.

    2 disconnected then reconnected the power cable from the printer.

    3 unplugged then replugged the USB cable.

    4 checked Windows Firewall setting to ensure the communication of the printer is not block.

    5. restarted my computer.

    Please help me solve this problem.

    Thank you!!!

    Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

  • My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

    When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

    Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

    I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

    Hi ChristineKrause,
     

    Here are some links that might help you:

    Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

    Advanced troubleshooting tips for General USB for Windows XP problems

    Try the steps listed in the items mentioned above and see if that helps you solve the problem.

  • The Dell printer cannot communicate with the Dell computer.

    It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

    Jesse,

    Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

    Please answer these questions to get more clarity-

    (1) what are the other steps in troubleshooting tried by you so far?

    (2) other changes on the computer that I should know about?

    In the meantime, I have you refer to items offered on the Dell website - troubleshooting

    http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

    You can also have a look at the Microsoft article as well-

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Get back to us with the results.

  • Printer problems. Error "computer cannot communicate with the printer.

    I had problems to access Windows Explorer and the rep Dell IT installed Mozilla Firefox 4.0 Beta 10 for my Windows Vista as an alternative.  Now my Dell AIO 946 printer does not work.  Whenever it is fixed, it prints until I am notified to download an upgrade of the system.  After that I downloaded the upgrade, the printer does not work yet.  The ink cartridges will not align.  I get a message of "remove stickers ink", which is clearly not the problem because the cartridges are not new.  Now, I get a message that says "computer cannot communicate with the printer.  I re-installed the printer several times, disconnected from the power source and the URL and re-connected.  Nothing seems to work.  Any positive advice will be appreciated.

    grandmainontario,

    You can copy a document under the glass? B & W and color?

    If so, executing delete print jobs to remove items stuck print jobs in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer.

    Download the Vista drivers.

    Install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

    You will find links to the patch/drivers to...

    Reference Dell 946 Photo all-in-One Printer owners thread (W7)

    Also try this tweak...

    Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

    Go to the section USB controller, and then click the plus sign +.

    Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

    Restart your computer.

    You can also read...

    You cannot print or preview before printing a Web page in Internet Explorer 9

    Rick

  • Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

    OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

    Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

    So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

    I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

    I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

    I'm really lost now, someone at - it suggestions?

    Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

    in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

    He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

    I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

    Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

    So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

    I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

    in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

    Thanks again!

  • Dell V313 printer cannot communicate with the computer

    When I try to print from my Acer Aspire Windows 7 on my dell v313, I get the message "communication not available - the printer cannot communicate with the computer. It's already happened, but when I restarted the computer it would print. Now, it won't. I replaced the USB cable and downloaded the last Cabinet V313 - and the software. Ink cartridges are filled. I am holder of a horse's hoof and a 4 leaf clover; but nothing works. What can I try now? Thanks for any help,

    Mike

    Mike,

    You can try to disable the ToolTips of printers. If the printer is wireless, try channel 11 in your wireless router. You can also try to remove computers printer scan list and then restart the computer and see if it prints.

    Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

    Rick

Maybe you are looking for