"Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

Similar Questions

• Windows cannot find 'SVIICHOST.exe '. Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  This message appears on the desktop after windows starts upward

  If you have correctly typed the name of this file, your computer has been infected. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan.
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Windows cannot find 'syStem.eXE '. Make sure you have entered the name corretly, and then try again. To search for a file, click the Start button, and then click search.

  I get this error message when I try to open a mapped drive.  I open the other drives mapped without any problem.  However, if I type the path in\\servername\shareof the RACE, I can access the folder.  I can also access this folder if I press the arrow in the address bar and select it from the list.  Only when I click on it from my computer, I get the error message.

  This PC has a new image just 2 days and I connect to another PC, I can access the mapped drive.

  I search for virus and ran without effect registry cleaners.

  It is a Windows XP SP3, HP probook 6550 b, the laptop computer is on a domain.

  I hope you have a solution for this.

  Thank you in advance.

  Hi salame,.

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theForums of TechNet Windows XP.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot find not '(null) '. Make sure you typed the name correctly and then try again. What does this message mean?

  I don't see any of my desktop shortcuts, nor can I open all the files. This message appears after a minute or so, when I click on the start menu and select my programs.

  Can anyone tell what it is and how to fix it?

  Well, what is... odd to say the least.

  It seems that this error occurs in many circumstances, so could you tell if you have anything installed recently, as IE7.

  It also seems that it could be the work of a virus, so I recommend you download free version at http://www.malwarebytes.org/ Malwarebytes and does not perform a scan.

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows cannot connect to a network

  I recently had to wipe my computer and I reinstalled Windows 8. I installed all the updates and went to download Windows 8.1, and he said that he could not connect. I checked my connection, and I'm connected to the internet via an ethernet cable. I have reset my modem, but IE just says that it cannot connect to a network. I don't have any antivirus software on the computer at any time. I did not anything on this subject except downloaded updates.

  How can I get my computer browser working again and get 8.1 to re-download?

  Hello Heather,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Airplane mode is turned on.
  -Badly connected or disconnected cables.
  -Missing updates.
  -Incorrect network connection settings.
  -Network damaged or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the NIC and the resolution of the problems of Internet connections and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'network card'.
  c. click 'Next' and follow the on-screen instructions.

  To run the troubleshooter for Internet connections, you can choose 'Internet connection' instead of 'network card'.

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. "Error code: 0x8007045D.

  When I tried to do a clean install of Windows 8 Professional 64 - bit, the part that says "Put into files ready for installation" goes by about 1% every 20 minutes. After hours of waiting before it ends, the error in the title always occurs at about 70%. How can I fix?

  In fact, I could solve the problem. It turns out be the problem of the DVD player. I tried to download the ISO on a USB key and it worked.

• 3110 webcam and Skype - cannot start video rendering engine. Make sure you have a valid installation of DirectX.

  I had a new HP Pavillion Elite running Windows 7 and bought a HP Webcam HD 3110 which is supposed to have Skype compatibility (clearly indicated on the packaging).  The webcam came with a bunch of software (ArcSoft Magic - i Visual Effects2, ArcSoft Webcam companion 3, ArcSoft Connect and ArcSoft ShowBiz).

  When I turn on my webcam using the ArcSoft program it seems to work fine (I can see and record videos with sound). When I try to use Skype, the sound works fine (there is a microphone on the camera). In Skype, the video does not work and it gives me the message "cannot start video renderer. Make sure you have a valid installation of DirectX.

  I have the latest version of the driver for the webcam, I have the latest version of DirectX (version11) and the latest version of Skype (version 5.0.0.152). I tried to use "ManyCam" program that some people recommended, but it did not work. Anyone else have this same problem? Someone knows how to solve?

  Help, please!

  I think HP has provided an update to the drivers of webcam which solves this problem... and Skype will include a fix soon.

  http://support.HP.com/us-en/document/c02639369

• "windows cannot find"helpctr.exe"make sure you typed the name correctly..."

  I did system restore recently to avoid some problems with internet connectivity. Since then, when I click on help and support I get a error message "" windows cannot find ' help ctr.exe. "" Make sure you typed the name correctly and then try again. To search for a start button click on file and then click on search.

  Hello

  You can try the steps of troubleshooting provided in the links below and check if the problem persists.

  Cannot load help and Support Windows

  http://support.Microsoft.com/kb/555472

  You cannot open the help and Support Center in Windows XP

  http://support.Microsoft.com/kb/888018

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• XP user account being of error "Windows cannot find c:\documen~1/user/locals-1/temp/crss.exe. Make sure you typed the name correctly.

  Hi, I have two problems

  First on my brothers account, I get the following error message: windows cannot find c:\documen~1/henry/locals-1/temp/crss.exe. Make sure you have entered it correctly the soul. In this story, I can't click anything that runs - IE without access to the internet or anti-virus software, I think its something to do with rstrui.exe or rundl32.exe.

  Secondly, I do not get the first error message on my account but I can't run any programs. He can't know what to use to open it. But the guest account seems to work very well.

  I think I have a Trojan horse, which is messing with my registry. I tried my computer with anti-spyware and malware scanning software, but it is no longer showing me what is infected, in safe mode with network. I tried "SUPERAntiSpyware" and "Malwarebytes' Anti-Malware.

  I looked on the internet but nothing I tried works. Please can someone help me.

  Thanks in advance.

  Hi Robzy_k4,

  You will need to update your antivirus and run a full scan of the system in safe mode, until you see that your system has no infection found.

  Once your system is virus-free, your desktop and eerything should be normal. It is likely that you are not able to open exe files open with dialog box:

  You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

  Then click on Start-> Run Type &-> Regedit-> ok.

  Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
  (you will have to press on + to achieve order)

  Now, double-click default slot right windows and then change the value in this box for '%1' % *.

  Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  Close regedit, restart your pc and check if its working.

  Now on the connection of your brother, once all the steps above are performed, click Start-> run, type & -> regedit-> ok navigate to HKEY_CURRENT_USER-> software-> Microsoft-> Windows-> CurrentVersion-> Run and on the right side, find the key that point to crss.exe in the temporary location and delete it.

  You can also check: http://support.microsoft.com/kb/310585

  I hope this helps.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• Error: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again at the start of Windows 7.

  Original title: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again.

  This error keeps showing up in when I connect to my pc. How am I able to fix this? It's really annoying. Please help me.

  Its a file/utility Logitech and nothing to do with the victory

• Windows 7 Windows cannot connect to the printer error

  Hi, since a few days ago I was connected to a network printer and everything was fine. Today, nothing works. I removed the printer thinking that would help (and I could go out and find him), BAD!

  I click on add a printer > add a network printer > select the network printer and get a box that says: I need to install a driver from the other machine, then I make him trust, etc blah blah blah, click OK and then get this error.

  Windows cannot connect to the printer.

  Operation failed with error 0x000003e3

  Both machines are running Windows 7 x 64.

  I googled all night with no solutions. Please help, I need to be able to print! Thank you!

  I solved the problem. I had to join the homegroup computer, was too attached to the printer. Once I did, he saw the printer and installed the necessary driver. I can print now!

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path