Windows cannot connect to the updates server. & Rise of Legends

Similar Questions

• As he tried to update 8.0.1 firefox is unable to connect to the update server.

  After getting the prompt to update 8.0.1, Firefox cannot connect to the update server. I've never had a problem connecting to the previous updates in the past. I'm running OX 10.6 and the currently installed version of firefox is 7.0.1.

  try to install Firefox 8 on top of Firefox 7, or

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles

  here explain how to save the profile

  • https://support.Mozilla.com/en-us/KB/backing%20up%20your%20information

  here explain how to restore it
  

  • https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Cannot be updated for the new VMWare Fusion - connection to the update server

  Hello

  My apologies if I seem ignorant and things must be explained clearly to me, but I am a Mac user on a Macbook Pro for the first time. Have installed Vmware Fusion, and am also running Windows XP. Whenever I have try and upgrade to the latest version of VMware fusion, I get an error saying "connection to the update server has been lost. How to fix this problem please? Subsequently I can't write any DVD on my Mac. Very frustrating.

  Please could someone help and advise what I can do?

  Thanking you!

  Fatima

  Suggest that you download the full version of VMware Fusion and then uninstall/reinstall it from the .dmg image file that you download.

• Download latest towers "connecting to the update server", will not download

  I tried to download the latest version of Firefox for the last 5 days on different internet connections. He turns and hangs on "connecting to the update server". The download will not be completed. Can you please help? Thank you.

  To install Firefox on a Mac, follow these steps:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Delete Firefox in the Applications folder.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  If the download is interrupted, check the reasons for it: if it's a low slow connection, it would be wise to seek a faster point to connect.

  Please report back to see if this helped you!

• Software update gets stuck to connect to the update server

  For a very long time (since Firefox 4 or more), I'm notified of updates, but when I say update I just get a window that says it has download firefox and it connects to the update server and it stays there forever. I left open for days and it never goes away. I've always had to go download a new copy of updated, but I really like to get the auto update work.

  I tried to delete history/cache/etc for ever. I deleted everything related to Mozilla AppData, I lose everything, but always the software update gets stuck. Of course, he's stuck something other than trying to connect to the update server. Any ideas?

  I suggest you to go through the path alternative and easier downloading of

  • getfirefox.com

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• Cannot connect to the activation server

  I tried to allow my computer with my adobe ID, but an error message appears. The permission toolbar appears for a few seconds, but then an error message comes up saying "cannot connect to the activation server. Check that you are connected to the internet. »

  I am currently connected to the internet and that you have added Digital Editions 3.0 to the my firewall programs authorized. I use windows 7. I also tried deauthrorizing my computer by pressing SHIFT + CTRL + D.

  I found the problem.

  http://tohellmylovewithyou.WordPress.com/2010/08/05/ADE/

  Check out the link for more info

• Every time I open Firefox I get the meesage from follopwing: it's recommended storngly you appl this update as soon as possible. When I have TRD to di, show he's trying to connect to the update server but nothing happens

  Everytime I open Firefox I get the following message: it is strongly recommended that you apply this update as soon as possible. When I try to do, is to show that it is trying to connect to the update server but nothing happens

  You are welcome

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.