Windows cannot discover any computer or device

Similar Questions

• "Windows cannot repair this computer automatically" - Satellite C660-108

  Got a new laptop for Christmas yesterday and it worked fine yesterday, I came home tonight and he asked me to click on restore and then restart. I realized that, now, whenever I go to turn on the machine, it brings the message "Windows cannot repair this computer automatically" and a saying to have connected external devices to and remove, then (which I don't have)...

  Was called "The Tech Guys" they said it was probably because when I started the laptop arrived so many updates etc and one of them went bad and I need to call back with the front desk and they'll go through it with me.
  So I intend to do, but I would like it if people could give advice on how to solve this problem.
  Thanks :)

  In my view, ting best that you can do now is to reinstall the OS using the recovery disk.
  After the own pre-installed operating system it will be working correctly again.

  How to do this you can read in the document or as a result of this document - s user manual http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  If you have any other questions you are welcome.

• Windows cannot repair this computer automatically

  Original title "Help? Laptop used to start.
  My laptop was working fine and then I went to turn it on and it keeps trying to windows startup repair and then says "windows cannot repair this computer automatically" if I click on problem it details reads as follows: StartupRepair V2

  AutoFailover

  CorruptFile, etc..

  It shows a ton of different ' problem signatures and a group of numbers too?  He repeated also unplug all devices recently attached to calculate as a camera or portable music player?  Don't attach something like that again?

  Any ideas what would cause this and how or if I can fix it?  IM wondering if my teenagers attached ipod or iphone and done something stupid?  Help?

  Hello

  1 did you do changes on the computer before the show?
  2. What is the brand and model of the laptop?

  Method 1:
  You can start the computer in safe mode and check if you are able to start
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  You can also perform a clean boot and check:
  http://support.Microsoft.com/kb/929135
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
  

  Method 3:
  If you are able to boot into safe mode perform control and restoration of the system:

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 4:
  Alternatively, you can run using the Windows Vista DVD startup repair.
  You can check the links:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Click on the link below:
  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• WINDOWS CANNOT FIND ANY ADDITIONAL NETWORK (DIAL-UP AND VPN) OTHER THAN THE WIRELESS NETWORK

  ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to the internet via USB with the computer "I get a message that windows cannot find any additional network." Its really disturbing that I can do to fix this. Can someone help me please.

  Even if a USB device, it does not create a new network connection for you.  I fear also that you use a regular USB cable - those connections often require a crossover cable (but more on that later and I guess it should work it is how it is advertised).  Go to start / Control Panel / Network and sharing center / set up a connection or network / and choose the first option (you can also check the main page to see if the connection is listed but I doubt it).  Choose to set up a new connection and follow the instructions - ensuring that you enter the correct settings when it is required.  You should perhaps install device drivers, firmware and or software for the device to work properly - read the installation mode (and call technical assistance from Nokia to help you put in place - they know more about what we do and should be happy to guide you through the process and even to set the settings on your computer until you log - that's what I would do in your before circumstane even of) ask for help here).

  To start / Control Panel / Device Manager and check all the new drivers (double clck on them) to confirm that they say that they do not work properly.  Go to start / Control Panel / Add Haedware and have the system check new hardware devices - if it finds, install them (it is perhaps what is missing in this process).

  I hope this helps.  If nothiing suggested I bring, don't hesitate not to contact Nokia for assistance - I'm sure they'll have you place and operate at any time.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• Windows cannot find any networks

  Hi all

  My dsl network connection is not discovered by vista suddenly I have tried all possible means, but to no avail any help would be greatly appreciated!

  the error message says "windows cannot find any network."

  its a DSL connected via a LAN connection

  I think I found the culprit, it turns out be a updated windows defender definition... ive stopped using my network connections now run fine LOL

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Windows cannot repair this computer automatically (Vista) after changing the motherboard

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  After the power outage, my computer crashed (Compaq machine pre-installed).  I bought the new mother/CPU/memory card and keep all the rest (HD, DVD, etc.).  When I boot using the old hard drive, I get "Windows cannot repair this computer automatically.

  Any ideas as to what I should do?  I intend to retrieve the HD upgrade to Windows 8.

  Thank you

  Clarification:
  Windows Vista is preinstalled on this system?
   
  If I read (and cited only) correctly - Yes, which is not going to work.  The license for Windows Vista was related to the Compaq system motherboard.  If you had that repaired under warranty, HP? Compaq could have helped you.  As you have created a new machine (motherboard especially) now, you will need to purchase a new license for Windows Vista or any other operating system of your choice.
   
  You could, I suppose, buy the OEM of Windows 8 version.  You will have the same problem later (OEM licenses is related to the first motherboard it is installed and activated with.)

• Windows cannot find any additional network / an unexpected error has occurred

  I got this new PC Windows Vista Home Edition x 64 SP2 and I need to connect it to the network wireless in my house because that the router Netgear DG834GT wireless broadband is not very conveniently placed for wired connectivity. I have a Netgear WG111T USB wireless adapter which works fine on my other PC / laptop (XP & Vista, both 32-bit), but I can't make it work on my Vista x 64 PC.

  I have installed the version of the driver 2.1.0.26 x 64-compatible for the WG111T and the device works correctly, according to Device Manager.

  When I try to 'connect', I get 'Windows cannot find any additional network . " While the other PC at home can pick up 3 wireless networks.

  Go until the network & sharing Center, then manage the networks without wire, then Add, then manually create a network profile, I get "unexpected error ."

  I spoke to Netgear who insist the player WG111T is compatible with the x 64 visits.

  I talked to my PC provider who suggested to try the adapter on another PC Vista x 64 to see if it works there. Problem is, I don't know anyone else with a Vista x 64 PC.

  I would be extremely grateful if someone can help me before on this one. Thanks in advance for all advice.

  See you soon,.

  Arty-W

  It seems that the problem was caused by ZoneAlarm Internet Security Suite hinder and prevent the correct installation of the Netgear wireless driver. My problem has been cured by following the advice of daouda wire - see http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/58716eca-80cb-4555-a1f4-bd4e5350aeb4

• error message "windows cannot find any network."

  When I try to connect to my wireless network, I get an error that says "windows cannot find any network". Already called my internet provider and has been sent back to microsoft. I have a netbook at home and he search for connection to the internet, but my desktop running Windows Vista Home prem is this error message. I use microsoft MN500 as my router.

  Hello

  1 are there any changes or updates made on the computer?

  2. were you able to connect to the network before?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to reset the TCP/IP Protocol and check if it helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 3:

  See the link and check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, (http://support.microsoft.com/kb/322756/) see link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows cannot find any neworks with Wi - Fi

  I have a Toshiba laptop that connects to the internet via a Belkin N router.

  During an internet session, the laptop can lose connection and if I try to connect to a network I get the error message "Windows cannot find any network."

  Nothing has been changed during the session.

  Laptop computer shutdown and restart will allow the laptop to auto automatically reconnect to the preferred network.

  My impression is that it is a software problem.

  Hi kaspercat,

  Rather than restart you tried the option "diagnose and repair"? Right click on the internet icon (two monitors flashing) in the notification area and in the menu drop-down, select diagnose and repair. This usually works fine for me if the laptop on my network loses connection.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Windows cannot reset your computer

  My computer says windows cannot reset your computer... Please help me to reset my computer...

  The original product key is embedded in the motherboard of the laptop UEFI firmware, so you're not going to lose...

  If you restore using recovery media HP, which will retrieve the key automatically and reactivate the original OS.

  However, you have already saved your PC running Win10 with Microsoft. So, if you decide to install Win10 instead, as long as you install the same version you already running, once the PC connects to the Internet, it will communicate with the Activation of MS servers and automatically reactivates.

  Good luck

• Windows cannot find any additional network?

  I am currently using my laptop that can connect to my home network but my PC can't. My PC can't find no additional network. It says it is connected to the network called 'Network', but I can't use my internetor all programs using the internet. It says "windows cannot find any additional network." I clicked on "Diagnose why windows cannot find any additional network", it told me to update my drivers and my drivers he's was updated. Can someone help me?

  Hello

  You can check the link below and try the advice given and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-cannot-find-any-additional-networks-an/ca9f086b-42A5-46E5-b894-92c009f8eba8

  Hope that information was useful

• Windows cannot find any network (unable to connect to the internet!)

  I use Vista on my laptop... All of sudden my connection to laptops is down... and when I searched for my wireless connections... I get a message indicating that Windows cannot find all the networks.

  I can find networks and connect to our wireless through other cell phones in the House.

  I am, however, not possible to connect to the same if internet I connect the cable from the laptop to the router.

  I also tried to restore the system to 3 days before the problem happened, however, I had no chance to fix the problem!

  Please... anyone know how I can fix this problem?

  Any help will be very appreciated!

  SHWC9507

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows cannot access \\[other computer] error code 0 x 80070035

  I have 4 laptops, 2 Win7, 1 running Win8.1 and 1 running Ubuntu 14 running. I used to have access to the other occasional problem, which was fixed by rebooting the router. I changed the 1 billion in the most recent router and I lost the connection between all Windows machines. Machine of Linux works fine, can access the shared folders on all Windows machines can ping all Windows machines can ping Linux machine, but cannot ping each other. Even in mode 'security '. All Win computers can access shared folders on the Linux machine. I searched and tried most of the solution without success. It must be a bug in the Windows operating system, preventing them from talking to each other and I can't put my finger on it.

  Hey Jake,

  Thanks for posting your question in the Microsoft Community. We apologize for the inconvenience caused to you.

  What antivirus application do you use?

  Check out these links and check the issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-access-computer-name-error-code-0x80070035/0d0af4ce-10ea-42b3-8755-f044848e9fce?page=3

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-cannot-access-error-code-0x80070035/94b0d58d-6ed7-458C-9A18-74c9524627ce

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-code-0x80070035-lap-top-computer-on/e36bfd8e-E540-475D-b704-7364d303f78b

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  It would be good that you post this question in the TechNet Forums, where we have some support professionals who are well equipped with the knowledge on networking issues, to please visit the link provided below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  I hope this helps. Please let us know if you need assistance.