Windows cannot find any additional network / an unexpected error has occurred

Similar Questions

• Windows cannot find any additional network?

  I am currently using my laptop that can connect to my home network but my PC can't. My PC can't find no additional network. It says it is connected to the network called 'Network', but I can't use my internetor all programs using the internet. It says "windows cannot find any additional network." I clicked on "Diagnose why windows cannot find any additional network", it told me to update my drivers and my drivers he's was updated. Can someone help me?

  Hello

  You can check the link below and try the advice given and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-cannot-find-any-additional-networks-an/ca9f086b-42A5-46E5-b894-92c009f8eba8

  Hope that information was useful

• WINDOWS CANNOT FIND ANY ADDITIONAL NETWORK (DIAL-UP AND VPN) OTHER THAN THE WIRELESS NETWORK

  ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to the internet via USB with the computer "I get a message that windows cannot find any additional network." Its really disturbing that I can do to fix this. Can someone help me please.

  Even if a USB device, it does not create a new network connection for you.  I fear also that you use a regular USB cable - those connections often require a crossover cable (but more on that later and I guess it should work it is how it is advertised).  Go to start / Control Panel / Network and sharing center / set up a connection or network / and choose the first option (you can also check the main page to see if the connection is listed but I doubt it).  Choose to set up a new connection and follow the instructions - ensuring that you enter the correct settings when it is required.  You should perhaps install device drivers, firmware and or software for the device to work properly - read the installation mode (and call technical assistance from Nokia to help you put in place - they know more about what we do and should be happy to guide you through the process and even to set the settings on your computer until you log - that's what I would do in your before circumstane even of) ask for help here).

  To start / Control Panel / Device Manager and check all the new drivers (double clck on them) to confirm that they say that they do not work properly.  Go to start / Control Panel / Add Haedware and have the system check new hardware devices - if it finds, install them (it is perhaps what is missing in this process).

  I hope this helps.  If nothiing suggested I bring, don't hesitate not to contact Nokia for assistance - I'm sure they'll have you place and operate at any time.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Windows cannot find any networks

  Hi all

  My dsl network connection is not discovered by vista suddenly I have tried all possible means, but to no avail any help would be greatly appreciated!

  the error message says "windows cannot find any network."

  its a DSL connected via a LAN connection

  I think I found the culprit, it turns out be a updated windows defender definition... ive stopped using my network connections now run fine LOL

• error message "windows cannot find any network."

  When I try to connect to my wireless network, I get an error that says "windows cannot find any network". Already called my internet provider and has been sent back to microsoft. I have a netbook at home and he search for connection to the internet, but my desktop running Windows Vista Home prem is this error message. I use microsoft MN500 as my router.

  Hello

  1 are there any changes or updates made on the computer?

  2. were you able to connect to the network before?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to reset the TCP/IP Protocol and check if it helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 3:

  See the link and check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, (http://support.microsoft.com/kb/322756/) see link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows cannot find any network (unable to connect to the internet!)

  I use Vista on my laptop... All of sudden my connection to laptops is down... and when I searched for my wireless connections... I get a message indicating that Windows cannot find all the networks.

  I can find networks and connect to our wireless through other cell phones in the House.

  I am, however, not possible to connect to the same if internet I connect the cable from the laptop to the router.

  I also tried to restore the system to 3 days before the problem happened, however, I had no chance to fix the problem!

  Please... anyone know how I can fix this problem?

  Any help will be very appreciated!

  SHWC9507

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows cannot find any neworks with Wi - Fi

  I have a Toshiba laptop that connects to the internet via a Belkin N router.

  During an internet session, the laptop can lose connection and if I try to connect to a network I get the error message "Windows cannot find any network."

  Nothing has been changed during the session.

  Laptop computer shutdown and restart will allow the laptop to auto automatically reconnect to the preferred network.

  My impression is that it is a software problem.

  Hi kaspercat,

  Rather than restart you tried the option "diagnose and repair"? Right click on the internet icon (two monitors flashing) in the notification area and in the menu drop-down, select diagnose and repair. This usually works fine for me if the laptop on my network loses connection.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

  Original title: 953691

  Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

  Error message reads

  The installation cannot continue because an unexpected error has occurred

  http / / microsoft.com//kb/953691 support

  Any suggestions?

  Hello

  ·        Have you tried the steps mentioned in the article KB 953691?

  ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

  If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• Fix the installation Center has encountered an error - an unexpected error has occurred

  I had tried everything to install the Microsoft difficulty It Center but get the same error at all times and have no idea why.  The error message is:

  Fix the installation Center has encountered an error

  An unexpected error has occurred.  Close, and then try to install again.

  
  

  Of course I tried this several times with the same results.  I am logged on as administrator and cannot find any specific details as to why it persists.  Can you help me?
  

  Dave

  OK, besides it seems that this happens if AutoPlay is disabled (!).

  http://social.Microsoft.com/forums/en-us/fixitcenter/thread/9089abba-ACA9-4833-ab71-c863c69d696d

• LifeCam3.22 an unexpected error has occurred

  Hi all

  Just have a new HP laptop, Win7 32 computer running.
  Cannot install my MS VX3000 webcam, which worked perfectly with my previous laptop HP Win7 32.
  It is disconnected, you try to run the Installer software lifecam3.22.exe than one made relevant by the homepage of the MS driver, but he always end with a "an unexpected error has occurred."
  Any idea?
  
  Thanks in advance,
  Franck

  Hello

  According to the description, it seems that you are facing problems with the installation of the webcam VX3000 you get an error message "an unexpected error has occurred." I'll be happy to help you in this problem.

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I also suggest you to consult and follow the steps from the links and check if the problem persists.
  Troubleshooting: Webcams
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup
  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
  http://support.Microsoft.com/ph/7746#tab1
  Hope this information helps.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

  I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

  Hello Max,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change (hardware or software) before the show?
  2. You receive error message when running the troubleshooter from network?

  0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  Try it out below mentioned steps and check if it helps.

  Method 1:

  Update or reinstall the Microsoft XML parser

  To download the latest XML parser, visit the following Microsoft Web site:

  http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

  (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

  Method 2:

  Replace corrupted files

  To resolve this issue, follow these steps:

  1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
  • Msxml3.dll
  • Msxml3a.dll
  • Msxml3r.dll

  2. after replacing the files, you must save the files. To save the files, follow these steps:

  1. Click Startand then click run
  2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
  3. Repeat steps a and b with the following files:
  • C:\WINDOWS\SYSTEM\MSXML2. DLL
  • C:\WINDOWS\SYSTEM\MSXML3. DLL

  4 restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store was not able to start.

  I can't use the convenience stores in the Panel and trouble getting my printer to re - install, when I click on devices and printers in Control Panel, rather than load him immediately, a green bar moves along the top where devices and printers are, but you can click on the choice and it will load If I go in safety in the Panel and choose troubleshoot, I get the error message, an error is produced so that download troubleshooting, or an unexpected error has occurred, the Troubleshooting Wizard can not continue. When I tried to access microsoft fix - it, I get the error message, troubleshooting cannot continue because there is an error, runtime error, code: 80040402, also 0x800B010E error codes. I am running windows 7 service pack 1 on Dell Inspiron laptop. I'm pulling my hair out! Help, please!

  Hello

  1 did you changes to the computer before the show?

  2. which antivirus is installed on the computer?

  I suggest you follow these methods and check.

  Method 1: Perform clean boot using the suggestions mentioned in the below mentioned link.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Run the tool (SFC.exe) System File Checker and check.

  Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833

  See also this link to resolve script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Method 3: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 4: Check the functionality in another user account.

  If it works in a different user account, then the user account is damaged.

  Create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!