Windows cannot install the USB 2.0 drivers

None does not work when I plugged my USB a USB device. I looked in the management of the computer and the USB (USB 2.0 - CRW) mass storage device was a triangle with an exclamation point. I tried to uninstall, and then reinstall so it would work if all goes well. After UN-installing, I can't re - install. It is said: "Windows encountered a problem installing the software driver for your device." The system can not find the specified file. »

How can I get my USB drive working again?

Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install their

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

    I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
    I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
    Windows found driver software for your device but encountered an erroe trying to install it.
    AMD USB 3.0 host controller
    The system cannot find the specified file.

    I try to point the location of the driver but same error.
    Other drivers installed ok only gives error

    I ve downloaded and unzipped the driver and everything seems OK.
    As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

    Try to download it again and start the installation manually.

  • Windows cannot install the Canon MF8300C series UFRII Lt kernel-mode print driver.

    I have upgraded to windows 8. Now I can't print. Called Canon, ran uninstall it, reinstall and got this error

    Windows cannot install the Canon MF8300C series UFRII Lt kernel-mode print driver. To obtain a driver that is compatible with the version of windows running with the manufacturer.

    Hello

    Thank you for giving us the opportunity to help you.

    Depending on your problem, you have upgraded to Windows 8, but you are not able to print through Canon MF8300C series UFRII you found the error.

    I would like to ask you a few questions about it.

    (1) have you been able to print earlier?
    (2) do you have a driver with this printer support?
    (3) are you an error during the installation of the printer driver?

    Installing the driver in Compatibility Mode

    Please follow the steps below to install in compatibility mode:

    (a) make a right click the driver installation file and select properties and then tap or click on the Compatibility tab.
    (b) check the run this program in compatibility mode for: box.
    (c) press or click the menu drop down and select a previous operating system, and then tap or click OK.
    (d) try to install the driver and verify.

    For more reference, you can go through the link given below.

    You can also search the driver from the link given below.

    http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction

    Hope your problem is solved now, please write us back if the problem persists.

  • Cannot install the USB mouse driver

    I recently bought a simple mouse, wired Plug-and-Play, but when I connected it to my computer, nothing happened before or after that the computer said that it had installed the drivers for it. Thinking that there was something wrong with the mouse, I tried to connect another computer and it worked without any problem. I searched for possible solutions to this problem, and one of these solutions was to go to Device Manager and uninstall all drivers under USB controllers. Then I restarted my computer and plugged in mice that had not been detected before, and I could move the cursor autour for a little while until Windows has started looking for drivers. Then it stopped working again and I was unable to use it.

    I also tried to delete the driver under the mouse and other pointing devices, but it does not solve this problem either.

    Original title: Windows does not detect the mouse after installing drivers

    Hello

    Thanks for posting in the Microsoft Community Forum.

    I appreciate your efforts to resolve the issue.

    Check out the following link for fixing common driver problems:

    Here are solutions to some common problems of pilot

    http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

    Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • Satellite L500 PSLS6A - 00 X 013 - cannot install the LAN and VGA drivers

    I just replaced my hard drive and installed Windows 7 Pro 32 bit on my L500 (PSLS6A - 00 X 013).

    I downloaded all the drivers of "My Toshiba.com.au" and everything was fine until I tried to install the Realtek Lan driver and VGA driver, all other drivers work very well, but he does not accept these two drivers.

    The L500 is an Intel i3 processor 4 gig ram any help would be appreciated.

    Collin

    _Regarding the display driver: _
    Which driver do you have?
    On the Toshiba driver page, you can find two different drivers (AMD/ATI and Intel) and a comment: +(For Supported Model Only) +.
    This means that you need to check the GPU and must use the correct driver.

    Your laptop is equipped with an Intel graphics chip. Then DON T install AMD/ATI driver!

    _Regarding LAN driver: _
    What's the problem exactly? Do you get any error messages?
    Can you please provide more details.

  • Portege M400: Installtion Windows - cannot install the RAID driver

    Hello world
    I installed my original form of the system DVD Toshiba (60 GB partition).
    So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
    There is also no results:
    -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
    -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
    Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
    .. Sorry for my poor English :)...

    Hello

    After installing the driver RAID you should not make any partition or format the HARD drive.
    If you do this, the RAID driver is deleted and you will get an error.

    So do all the changes on the HARD disk before you install the RAID driver.

  • Toshiba AT7 - A - cannot install the USB driver

    Hello

    I can't find the driver for my AT7.-a device.

    I tried the driver appearing on this page, which is available for both models, however, when I followed all the steps and when I select the folder where is the file unzipped with the "Add Hardware" in Windows XP, there is an error saying that all data associated with the device is not found.

    Help me please :(

    Message was edited: assignment has been translated

    Sorry, but I'm a bit confused of Mr. I checked the download page for AT7 - A and can not find anything by download.
    With Windows XP confuses me even more.
    What exactly do you want and what driver are you trying to install?

  • Get the message; Windows cannot install the upgrades and error 80072EFE

    As above

    Hello

    This rootkit has been known to cause this problem.

    TDsskiller (Rootkit removal tool)
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Then, restart and check the updates.

    To search for other malware use this online scanner:

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    ==================================================================

    If necessary:

    Run 1 SFC

    Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    ------------------------------------------------------

    Then check out this article:

    You may experience some temporary connection errors when you use Windows Update or Microsoft
    Update to install updates<-- check this="">
    http://support.Microsoft.com/kb/836941

    Do these two and try updates

    Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
    Server 2008 R2 Release Candidate for Windows 7 Release Candidate
    http://support.Microsoft.com/kb/947821/

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    =============================================

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

    Original title: open usb drivers problem

    My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
    I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
    In the Properties window, I get the following message:

    "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

    I don't remember making any hardware/software changes and do not know how to solve the problem.

    You are welcome.

    Something seems not quite right so contact the store can be a good idea.

    Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

    Original title: CD/DVD drives do not work after upgrade from XP to Vista

    I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

    Hi krt2,

    In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

    You can try to uninstall and reinstall the driver for the device to solve this problem.

    Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

    a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    d. restart your computer.

    Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also, read the following article and check if that helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error: "Windows cannot install to the selected location. Error: 0 x 80300001. »

    When I try to install Windows 7 on my Toshiba computer formatted I get this error message after trying to install the RAID driver during the installation process:

    "Windows cannot install to the selected location. "Error: 0 x 80300001.

    I'm unable to proceed with the installation. Can someone please?

    Hi Jon,

    This error can occur during a clean Windows 7 install the operating system installation media is not in the drive. This happens usually when a user is necessary for the exchange of discs in order to install the necessary drivers on the system and the operating system disks were not placed in the drive before proceeding with the installation.

    The error would not occur if the Setup program has been started using a USB key as stable media would not be switched.
     
    The solution would be to change the driver CD or DVD of Windows 7 install DVD media when this happens, then we can continue with the installation of Windows 7. In this particular case, it is likely that the RAID driver disk has been left in the drive.

    Note: This problem/error appeared less in Windows Vista since a message asking to specify the installation media usually as follows:

    "Please insert the disc 1 installation of Windows.

    Dan

  • Windows cannot verify the digital signature for the drivers required for this device

    I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

    I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

  • Cannot install the scanner (Epson Workforce 500) Windows 7 driver

    I have an Epson Workforce 500 multifunction printer, copier, scanner, fax, which worked well in the past, but the scanner no longer works.

    I tried several times, following the line (and by telephone with a technician of Epson) instructions on downloading and installing the printer updated and drivers scanner Epson.  However, always, the installation stops and the message that drivers cannot be installed (and then restart and try again message appears).

    I was able to get the printer to work by plugging the USB cable to the printer and allowing Windows Installer the driver of the ESC/P-R, but the scanner does not work, and I did all the other characteristics of the available printer.  When I try to get the latest driver via the printer preferences, I get the message that I have already installed the most recent driver.

    More recently, I used the Troubleshooting Guide for the Epson, up to the point where it is said: ' Click or Start and select programs or all programs. "

    Select Epson or Epson printers, select your printer folder, and then select Epson Printer Software Uninstall. »

    When I do this, the program from the start menu does not have the listed Epson printer, or it displays the option to uninstall the printer.

    In addition, when I go into Control Panel, uninstall a program, the Epson printer is not as an installed printer.

    I tried once more to install the driver downloaded from the Epson site package and again, has received the message that the driver could not be installed.

    Then, I used the window update to install all the updates Windows 7, deleted the Epson printer, reconnect the USB cable and restart the computer.  Once Windows has installed the ESC/P-R driver, which she says is the last available.  I'll let it go and just not use the scanner if I can't get this resolved.

    Before you install go to start, make right click on computer, click on properties and the system window will open, left eye for click Advanced settings open then click on the Hardware tab, click installing driver and assigned to the let me select never install Windows update, and save at the bottom. You can set it back by default later if you wish. Now install the downloaded driver, have turned on printer, but do not connect the USB cable until you are prompted.

  • Equium - Windows cannot load the device driver for USB dongle

    I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    -what it means and how can I solve this problem?

    Hi Ozcat,

    What USB dongle is that exactly?
    What cell phone do you have?
    What operating system is installed?
    Have you already tried to reinstall the driver for USB dongle?

Maybe you are looking for