Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) FOR the CD-ROM/DVD-road DRIVE
I just downloaded iTunes and now my = CD-ROM/DVD-ROM Drive does not work on my Compaq laptop. This is the error that he sees when I go to Device Manager. I need this problem as soon as POSSIBLE, I work on websites and I can't go without my CD burner. Anyone who can help help please. I'm panicking right now.
Thank you
Hello
Use system restore to before that you installed iTunes when the drive was working.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
======================================================
If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Running Server 2003, Web Edition SP2 Build 3790.
The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.
Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports. pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58
Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads
Diana
Microsoft Answers Support Engineer
-
And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.
I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have. The long, everything went well, except for the audio part.
Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device.
I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there! When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.
BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD. Thanks for any help on this, jim
Hello
Please follow the steps from the link below.
http://support.Microsoft.com/kb/310123
I also suggest you to install the drivers from the Dell site.
http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection
-
Audio loss. Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Tried to update driver and restore without success. Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it. Restored to an earlier date but still what system did not go. Tried to uninstall and reinstall the driver. Uninstall was successful but reinstall it read that the hdaubus file does not exist. I'm a computer dunce. Any help out there?
Hi BarbaraWolfe,There are many causes of Code 39 errors:
- A required device driver is missing.
- A required binary file is corrupted.
- There is a problem with the file I/O process.
- A driver that refers to an entry point in another binary file cannot load.
Re-install the driver by downloading it from the link given:Additional reference on:Check if that helps. -
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.
Hello
1. were there any (hardware or software) changes to the computer?
Run the FixIt and check if the problem is solved or not.
Your CD or DVD drive cannot read or write media (Fixit)
Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)
Hope that helps.
-
Original title: CD/DVD drives do not work after upgrade from XP to Vista
I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work. I also tried two external drives, same thing. I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers. Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd! Am tearing my hair!
Hi krt2,
In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load
You can try to uninstall and reinstall the driver for the device to solve this problem.
Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:
a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.
c. on the device properties dialog box, click the driver tab, and then click on uninstall.
d. restart your computer.
Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.
See the links below for more details on the update of drivers:
Updated a hardware driver that is not working properly
Also, read the following article and check if that helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
(KEYBOARD ERROR)
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Hello
I don't know how it happened.
I tried unistalling the software but have the same problem when connected to e
Help, please
Hi Davedirect,
· It's a wired keyboard or a wireless keyboard?
· Who is the manufacturer of keyboard?
· Since when are you facing this problem?
· You did changes to the computer before this problem started?
· Have you tried to restart the computer and check if the keyboard works normally?
However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below. More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.
Step 1
Remove the drivers from the computer. To remove the drivers to follow the steps below:
a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".
b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.
Step 2
During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:
a. Click Start.
b. access control panel > system > hardware > Device Manager.
c. open Device Manager and expand the keyboard device.
d. right-click on the device keyboard and uninstall the device.
During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.
Step 3
Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
Access the link below to learn more about the error code 38:
http://support.Microsoft.com/kb/310123
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized. If I restart the computer then it will recognize a card again. I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.
SD memory card
Device type: hard drives
Manufacturer: generic
Location: SDA Standard compatible SD Host Controller
Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Driver provider: Microsoft
Driver date: 2006-06-21
Driver version: 6.1.7601.17514
Digital signer: Microsoft Windows
Driver details
C:\Windows\System32\drivers\partmgr.sys
C:\Windows\System32\DRIVERS\sffdisk.sys
C:\Windows\System32\DRIVERS\sffp_sd.sys
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.
If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.
-
Original title: Audio recording sound recording microphone
Hey, if I get this message:
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xWhen I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff
There are several models of m6 ENVYENVY m6 -?
This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)This is a link to the HP support site to download driversAnd this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problemsLooks like something to remove the registry entries for the driver -
Equium - Windows cannot load the device driver for USB dongle
I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »
-what it means and how can I solve this problem?
Hi Ozcat,
What USB dongle is that exactly?
What cell phone do you have?
What operating system is installed?
Have you already tried to reinstall the driver for USB dongle? -
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
Maybe you are looking for
-
eBooks, it draws on the iPod
I am interested in getting eBooks from my library on my iPod so I can listen to in the car. I guess bring them into iTunes, then load into my iPod is easiest. Exactly how do I get ebooks in the library in iTunes and my iPod. I have an old click wheel
-
Fan MacBook Pro makes horrible grinding when picked up
I'm worried that my fan is really messed up. Sometimes when I take my laptop it sounds like the fan is hitting something inside my laptop. I also noticed that my laptop heats up as it usually does. Should I bring to the Apple Store? They will fix it
-
Wen yesterday afternoon, I opened my hotmail account, just say blocked account.
What is the password * address email is removed from privacy? * I don't usually sign so I just close my profile when finished. If wen yesterday afternoon, I opened my hotmail account, just say blocked account. So ive put my password and even that it
-
MySQL timestamp formatting errors
I continue to have strange formatting errors when pulling data from a MySQL database. I'm having now is with time values. The screenshot shows that the error is generated in the variant to Data.vi the real time stored in the database is from 08:30,
-
How often should I run check disk in windows vista edition Home premium?
How often should I run check disk in windows vista edition Home premium? Part of a regular maintenance schedule disk check?