Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

Original title:

Office blocked in the classic theme.

This morning when I started my computer, I noticed that it displays the following error message:

"Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

I went through the event log and found three errors:

Name of the error: Service Control Manager
Event ID: 7022

"The Windows Audio service hung on starting."

Name of the error: Application Popup

Event ID: 875

"Pilot atksgt.sys has been blocked by a load."

Name of the error: Service Control Manager

Event ID: 7000

"Atksgt service failed to start due to the following error:
This driver has been blocked by a load.

There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

Any help is appreciated.

I would like to use system restore to set up Windows in a few days.

Tags: Windows

Similar Questions

  • System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

    I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

    Hi 1234Tony,

    First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

    To repair and put back the Windows Vista

    1. Click the Start button.
    2. Type Cmd in start it the search text box.
    3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
    4. Type netsh winsock reset in the command line shell, and then press the Enter key.
    5. Restart the computer

      If please reply and let us know if your problem is resolved or if you need further assistance

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • Windows could not connect to the Service Notification of system events

    Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.

    My operating system is "Win7 Ultimate". What should I do to fix this?

    Hi Aporch,

    You can check if System Event Notification Service is enabled and set to automatic.

    Here's how you do it;

    1. Select start > run > and type services.msc.

    2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

    Also make sure Remote Procedure Call following the same steps above.

    3. restart your computer.

    If this does not help, try this:

    1. click on the Start button.

    2. type Cmd in the search text box.

    3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

    4 type netsh winsock reset at the shell command prompt, and then press the Enter key.

    5 restart the computer

    If please reply and let us know if your problem is resolved or if you need further assistance

    Aziz Nadeem - Microsoft Support

  • Said computers that windows could not connect to the system event notification service

    Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

    I played the system restore. Solved the problem, but why did it happen?

  • Windows could not connect to the Group Policy client service

    I get the error message after restarting my laptop with Vista Home:

    Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

    I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

    I tried this:

    1.

    http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

    with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

    My laptop have orginal Vista and I have no bootable CD.

    2.

    http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

    result:

    netsh

    Netch > winsock reset

    Elevation of the requiries the requested operation.

    Help, please.

    Hi SSergo,

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows could not connect to the user profile Service

    I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

    "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

    The error itself didn't come for two days now, but the problems still present themselves:

    -My personal profile seems gone.

    -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

    -Return to default settings

    -Slower than usual start.

    I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

    Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

    To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

    Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

    You could be up & running again within an hour, probably less.

    If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

  • Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

    As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

    I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

    I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

    After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

    Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

    Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

    Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

    I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

    Try to run This Fix - It.

  • HP PavilionNotebook-15-p101nm: "windows could not connect to the"wifi"

    new tour.  installed win7/64, gatherd all the missing drivers (Device Manager was all yellow) ultimately it does not connect to the internet. What to do... ? He sees the wifi, knows his name, etc., but does not connect to it. neither cable nor wifi...

    thnks in advance

    configuration of the router... solved the problem... connected via the MAC address... ...

  • Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

    Hello

    When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

    Hello

    It would be a good idea to run the System File Checker tool to see if you have corrupted files

    "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    ___________________________________________________

    And Malware scan:

    Search for malware, if necessary using the safe mode with networking.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • Windows could not connect to the System Event Notification service.

    I have a DELL Latitude E6500 32-bit computer Vista Ultimate SP2 with a wireless network in the home network. I got the above error message tonight and I don't know what to do about this. He said that this prevenets limited users to connect to the system. I don't know anything about networks. The Geeksquad installed for me and I'm lost.

    Help, please.

    See if this will help you to start the recent Notification System...

    Start button > in the search box, type services > press the Enter key > uac prompt > scroll down to find the event notification system... > until it clicks >
    topic status, it should be... Has begun
    under Startup Type, it should be... Automatic
    If it is not defined, right-click the event notification system > properties >
    in the start of type position, click on the pointer, and then select Auto
    as a Service status, click Start
    Click OK when finished

    Make the same adjustment of...
    Remote procedure... that represents the remote procedure call (RPC)
    DCOM Server Pro... which represents a DCOM Server process Launcher

  • Windows could not connect to the system event notification service service.

    Hello

    For the moment, I have a problem as in the title. Whenever I have Windows startup, a message box appears to tell me that it couldn't connect to the system event notification service service. I also lost my Aero theme too, they was disabled and cannot be enabled. I checked all the services, and they work fine. I tried "'winsock reset", "sfc/scannow" but nothing doesn't change.

    BTW, here is my journal CBS . I use Nod32 Antivirus.

    Sincerely,

    Quan Nguyen T.A.

    The WAT update seems to have been falsified.

    The installed product key is a MSDN one which was broadcast all over the internet.

    https://www.Google.com/search?q=2CGXT-3BQDX-DG8BM

    The installation is a counterfeit.

    You must reformat and reinstall using authentic materials and key.

  • Error at startup 'Windows could not connect to the Group Policy Client service. "

    http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

    It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

    http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

    It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

    I FOUND THE SOLUTION TO THIS PROBLEM!

    The crash of your computer during updates Windows caused which!

    I had this problem on my laptop since November, and it really annoyed me.  I sifted through the event log and found the model of events leading up to the issue and, probably, he did.

    In short, the model is as follows: Windows updates automatically run as planned, and when restarting is launched after the updates are complete, the computer crashes (probably during the reboot sequence).  When starting, it signals that the last stop was not planned, and the question starts to happen.

    I spent 2 days trying to dig a solution by Internet, without success, until I came across this page.  It says nothing about this particular problem, but it gives more information on the SVCHOST process that launches many services, including Group Policy Client.  It seems that when restarting vital registry settings have been lost during the accident and Group Policy Client 'do not know' how to start.  Let me explain:

    There are two places to look in the registry:

    1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path must contain gpsvc key (a record), which is responsible for the configuration and service settings.  I found the key was intact, so you do not touch anything here - just check that the key exists.
    2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows svchost It's the most important way you should look at in, because it should contain keys and values under the #1 key.  Here are descriptions of what must be present there.
    • There must be called GPSvcGroupmulti-string value. My laptop was missing it.  Thus, you must create the multi-string value called GPSvcGroup and assign it the value GPSvc.
    • Then, you must create a key (a folder) and name it GPSvcGroup - this key should normally be there, but, again, that it was missin on my laptop.
    • Open the newly created GPSvcGroup folder, then create 2 DWORD values:
    1. First called AuthenticationCapabilities and you must give it a value of 0 x 00003020 (or in decimal form 12320)
    2. Second, called CoInitializeSecurityParam , and it must have the value 1.

    When you have finished all the above steps, restart the computer, and the problem will be solved.

    Step by step video for those who are not very technical procedure is here: http://youtu.be/4m5KEmckWK4

    I'm so relieved that I could remedy and hope this will help others with the same question.

  • Windows could not connect to the wireless network

    Hi all, I just bought a HP dv4 series. I receive this connection problem. My laptop can detect the network but still fail to connect. I need to press 'connect' to get connected. It sometimes takes 40 + tries to connect to the network.

    I am using D-Link 2640 - T and it's the WEP security.

    Network card: broadcom 43225 802.11b/g/n

    Can anyone help? I tried to delete the profile for the wireless network and connect to the rear, it did not work. I even reset my wireless router.

    I guess I found the solution, at least it works fine for me for a few days

    1. right click on my computer

    2. click on properties

    3. Select Device Manager

    4. Select yout network cards

    5 right-click the map network and choose 'properties '.

    6. go to the Advanced tab

    7. in the title, choose "rate (802. (11 b / g) ".
    8. choose '54' in the drop-down list instead of the default "best rate".

    Hope this helps others who face the same problem like me

  • Windows could not connect to the Group Policy Client services

    I tried you-tube suggestions on editing the registry and change the permissions of system administrator services but nothing worked.  I have 10 users who get this message and cannot log on to their machines.  The funny this is, so try it by logging in on enough times the 7 or 8 they will get in.  I don't understand why they can't connect the fist 6 times but 7, they can.  Thank you for your help

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Could not connect to the service user profile Service.

    I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

    "Unable to connect to a windows service.
    Windows could not connect to the service user profile Service.
    This problem prevents limited users to logon to the system.
    As an administrator, you can review... »

    Shortly after this message, I get a windows error message saying:

    "Location is not available.
    C:\Windows\system32\config\systemprofile\Desktop is not accessible.
    Access is denied. »

    This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

    While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

    I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

    I'm not sure what that means at all, but I hope that one of you people can help.

    Thank you!

    Hello any Leafs fan,

    Thanks for posting on the Microsoft answers Forum.

    Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

    Usually, when the above error occurs, it is due to a corrupt user profile.
    The best way to fix this is to remove the user profile.

    • Go to the Start button
    • Right click on computer
    • Go to the properties
    • Go to Advanced System Properties on the left pane
    • Select the Advanced tab
    • Go to the user profile Section and click on the settings button
    • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
    • Connection again and you will get a new profile.
    • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

    The only way to identify what caused the error with the user profile is to try to reproduce it.

    If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

    If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

    You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
    To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

    Please post with your results and if you need further assistance.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Impossible to update ratings on iphone

    Since the last update to IOS 9.3.1 I'm not able to update the meaning of the notes on mymusic on my device iphone 5s. Several State forums you press the name of the artist, etc. while playing the melody, he used to work.but now this action just bring

  • Satellite L845D - how to increase shared video memory (AMD APU)

    I have a 512 MB to 1 GB, but I have no option in the BIOS. In desktop APU systems, it is possible, since there is an option in the BIOS. Should I kind of updated, unlocked or BIOS 'hacked '? Thanks in advance

  • Optimize the time spent in the digital resolution of ODEs?

    I'm numerically solve an ODE to the RK4 VI. I need to use a size of fixed bearing that I need in order to save the values of synchronously. Running a time step now takes about 5 ms on average. I ran the ODE even under Mathematica and obtenu.2ms at th

  • Several axes are overlay eachother

    I'm working on a program that will allow users of land up to 5 different channels with axes y indepdnant. I make it visible / invisible depending on how many channels is being plotted.  Unfortunately, the lines begin to overlap eachother.  I decided

  • How an analysis of a file downloaded before you run using Microsoft essentials

    I download a file in the downloads folder and want to scan it to ensure that it is free of viruses before I RUN it. Can and how do this?