Windows could not load the installer for wpd
Hello
Load Windows XP Pro on an Acer Aspire 9410.
I received the above error code.
Unit boots to the desktop. After a few minutes, I get the blue screen of death. The error report is damaged.
All ideas
John
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Windows could not load the installer for the display
Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:
Do you have downloaded screensavers, etc...
1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".Select ' Yes, "I have already connected the hardware" > click "next".Find and click on your device and click "next".If a driver is necessary, it should have with your hard drive.You can select "Disk" and load the driver from there.If successful, go no further(2) when you install new video drivers
Uninstall the old ones
Restart in vga mode
disable a / v
Install new drivers
ResetIf successful, no further(3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.Retry installation -
Windows XP could not load the installer for battery on Satellite P20 S103
I have the above problem, I already downloaded the driver for the power manager here I do not see a battery?
I can't find it on the site of toschiba
the battery number is PSP20E 000XHV-No.I hope somewone here can help me with a driver or something I really don't now where to look further.
Thanks in advance
Wouter wally man welcomes wouter from Holland and canada at this timePS the operating system is windows XP to meet just more information
Hello
What do you mean by "I don't see a battery? Usually, you should always to be able to see the State of the battery, if you disconnect your computer from the power supply.
The powermanager manages just what powersaving profile is loaded when boasts a particular situation or condition (as full power or watch DVDs, etc...)
Cut just AC power to your PC and you will see the battery symbol.
Please clarify your question.Welcome them
-
Windows could not load the installer of the image. Help please!
My HP4010 scanner has stopped working. I tried to reload the software, but now get message ' windows has no load installer for the image. I have uninstalled and reinstalled the HP software and tried as far as I know. I downloaded the latest HP drivers but no change. I should be grateful if you would help.
Thank you
John
Hello
Step 1: This could also be a problem with the driver. I suggest you to install the right driver for your scanner from the manufacturer's Web site and check if it works very well.
Step 2: Install the latest version of DirectX on your computer.
Reinstall the latest version of Microsoft DirectX. For more information about troubleshooting and installing DirectX click the numbers below to view the articles in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/179113/ ) How to download and install DirectX(http://support.microsoft.com/kb/157730/ ) How to determine the version of DirectX using the DirectX Diagnostic tool
Step 3: You can also delete the upper and lower of your registry filters and check if it works.
WARNING:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
a. Click Start and then click all programs.
b. click Accessories and then click Run.
c. type regedit and then click OK.
d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
e. in the navigation pane, locate and then click the registry key under:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
f. in the right pane, click UpperFilters.
Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.
g. in the Edit menu, click on delete.
h. When you are prompted to confirm the deletion, click Yes.
i. in the right pane, click LowerFilters.
j. in the Edit menu, click on delete.
k. When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Mr., restart the computer.
-
Hello
I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.
The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION
When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.
How can I get out of this loop please?
Thank you.
Lucie
Hello
For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.
This recovery process is the manufacturer, not Microsoft.
________________________________________________
You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.
See you soon.
-
Windows could not complete the installation - Message in Vista 32
Windows could not complete the installation. To install windows on this computer, run the Setup again.
I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?
Hello
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Sysprep is not - Windows could not complete the installation
Original title: Sysprep failed
I started a sysprep on my windows7 pro computer restarts and says
From Windows, it jumps to "Setup prepares your computer for first use.
After 5 seconds an error occure
/ "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »
I press Ok and it says installation continues after the reboot.
and in this loop im stuck.
Is it possible to do a new sysprep without getting the OS to start?
Hello Simon,.
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
Your computer is connected to a domain network?
Thank you for details on the issue.
Preparation system (Sysprep) tool prepares an installation of Windows for duplication, auditing, and customer delivery. Duplication, also called imaging, allows to capture a customized Windows image that you can reuse throughout the organization. Audit mode allows you to add additional device drivers or applications to a Windows installation. After you install additional drivers and applications, you can test the integrity of the Windows installation. Sysprep also allows to prepare an image to be delivered to a customer. When the customer boots Windows, Windows Welcome starts.
You can check the suggestions of MarkBeacom responded on 28 June 2012 and Mark l. Ferguson responded on November 3, 2009.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-could-not-complete-the-installation-to/bf09c3c5-298B-459F-AED5-4f431b8398f5I hope this information helps.
Please let us know if you need more help.
Thank you
-
Windows could not complete the installation.
Hi, I use the windows 7 edition starter with ASUS Eee flare series. This message appears when I do the system restore, "Windows could not complete the installation. To install windows on this computer, restart the installation.
Hello
Welcome to the Microsoft community.
According to the description, it looks like you get the error, such as "Windows could not complete the installation" when you perform a system restore.
However, we need more information about the issue to help you better.
Please help me to answer these questions.
Why you perform a restore of the system on the computer?
Try this method and check:
Method 1:
Try to choose a different restore point and check.
Method 2:
Perform a startup repair
Note: you can perform this step only if the mode of the Windows recovery environment is enabled on your computer by the manufacturer of the system (Acer). This mode allows you to use the recovery options.
Click: Startup Repair
Also check:
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-in/Windows7/what-are-the-system-recovery-options-in-Windows-7
Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.
-
Could not load the navigation for subject area? What does this error mean
When I run the overall consistency check in my RPD. I get this error.
Could not load the navigation for the business area.
Source of the dimensional table has no column mapping.
-What it means and how should I solve this problem?Hi friend
Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.
And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").
Kind regards.
Published by: Hammett81 on December 3, 2010 10:10
-
Windows could not load the profile of the user
When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.
Please reply me with the solution that I use win xp sp2Hi citycc,
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. are you able to connect to Windows?
4. how many accounts do you have on the computer?
See the Microsoft article below and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
-
A hard drive the HP dv2915nr laptop was dead. Installed a new hard drive and use the HP recovery CD. installs for 4 hours and then stops: Windows could not complete installation. Please re - install Windows again. Each facility is 4 hours. Because another install and it took 4 hours and then it restarts and stop at the same error. Now, I'm administrator (locked) - turn off when I pop in the recovery CD. Message: Your account has been disabled. Please, see your system administrator. I tried Safe Mode and loading Windows files stops at crcdisk.sys all the time and then restarts and displays: Windows could not complete installation. Please install again. Can't go in the office. Only restarts with these messages. Asked HP cat (3) Tech people and they do not have the answer. Said, could be a compatibility issue with the software. I ordered this CD of recovery on their part and he got yesterday. Now, they send in the laptop. So tried advice here. Please notify.
I found the answer. HP Tech Support Chat did not know the answer. When you run HP recovery CD, don't hit the restart WINDOWS button when it asks. The software will do it for you automatically. It will take a while (several hours 1-6 hours) to complete. You'll know it's done when WINDOWS ask you information of language, country and keyboard. In other words, don't touch anything once you start the restore CD program. Leave it alone and it will fix it for you. IGNORE the pop-up restart.
I can't believe HP has not even tell me that and 3 chat sessions with them was a waste of time. Last HP person ask me to send in the RECOVERY CD and the laptop.
No help from anyone on this issue. :(
BUT I thought about it. :)
-
Windows could not load the NLS being missing or corrupt data.
I reinstalled Windows Vista 32 bit on my laptop Gateway using the OEM install cd that comes with it, but now, when I boot, I have the following window:
Windows Boot Manager
Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: Windows failed to load the NLS being missing or corrupt data.Reading a similar post, I tried kites 3 methods of WinRE (Startup Repair, Bootrec /RebuildBcd, System Recovery) but they didn't work. I ran the WinRE Windows memory diagnostic tool and no error on my hard drive.
I went to the gateway support site & also tried to access the recovery partition by pressing ALT + F10 to reboot, but it didn't work either. I tried pressing F8 safe mode, but I don't have the option "Repair your computer" that would have gotten me in the window of the gateway recovery management. I can't get in either safe mode, load a list of files and stops on Loaded: \Windows\system32\drivers\crcdisk.sys, then the message Windows Boot Manager window reappears again (see above).
Reading another post, perhaps to copy files .nls of my installation on my hard drive cd would do the trick, but I don't know how to do this. I need the old data, I want to just my laptop to boot and run without having to buy a new hard drive.
Thanks in advance for your help.
Here is an answer I've found: http://www.eggheadcafe.com/software/aspnet/34039669/nls-data-is-missing--cannot-repair.aspx of Gary Velvet:
I set up an instance of Vista virtual machine and copied since all the
*.nls in/Windows/System32 files and all *.fon files of the
Windows/Fonts. I then put on a USB key and inserted in
the breakage of the machine.I didn't know that this WindowsRE could read USB drives. It does things
easier. I then crushed the files on the area damaged with those of the
clean installation and a reboot took me directly in Vista.If may also be possible to copy corrupted files of a true Vista Installation DiskLhttp://www.vistax64.com/tutorials/261616-extract-files-vista-installation-dvd.html.
To find out which kid are corrupt, we need to run a program to find the corrupted system files. If you use the drive, go to the prompt controls and cd to C:\Windows\System32. Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files usinghttp://support.microsoft.com/kb/928228. Try to put all the files corrupt here so that we can see if they can be repaired with good copies of the installation disc if we can identify those who go there where replace them correctly.
Let's see how these options work before considering anything else.
I hope this helps. Keep me in the loop.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
"Windows could not complete the installation", Y510P
Hello
Just got my new Y510P and realized it's impossible to start Windows.
Initially it displays error "Windows cannot parse or process Unattend...» [... \unattend.xml] [oobeSystem] pass... »
After reboot he start to display a different message - "Windows could not complete installation, restart the installation.
The operating system is Windows 8.1.
Looks like I'm not the only person having this problem. System recovery does not help, of course (as well as the graceful Lenovo tech support).
I think that the problem caused by the incorrect unattend.xml file that fails to install any software because of this error and unnesessary blocking Windows to complete the installation.
I see no other way rather than installing Windows from another source. I don't want to pay for another Windows license and instead return the Lenovo laptop, but perhaps there is another way?
Problem solved.
I contacted Lenovo support and they offered me to send recovery discs I received a few days later. I installed the cleaning system of records and have not experienced any problems since.
I'm still not fully satisfied because I cannot reset the laptop to the factory settings without these discs, but I think I can live with that.
-
Could not load the driver for Teredo Tunneling Pseudo-Interface
Hello
Does anyone know how to fix this problem (Vista) Business
Product
Teredo Tunneling Pseudo-InterfaceProblem
Could not load driver softwareDescription
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.Signature of the problem
Problem event name: PnPDeviceProblemCode
Architecture: x 86
Hardware ID: * TUNMP
Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
The PnP problem code: 0000000-a
Driver name: tunmp.sys
Driver version: 6.0.6000.16386
Driver date: 02/11/2006
OS version: 6.0.6000.2.0.0.256.6
Locale ID: 2057Additional information about the problem
Bucket ID: 12121968Concerning
DaveHi Dave
Can you please give us more information on your laptop and what is happening exactly?
-
Could not load the NIC for Windows NT 4.0
Hi guys
I was unable to load a NETWORK adapter in Windows NT 4.0 from a machine that I migrated to P2V using VMWare Import
I did the following:
Tried to add map AMD PCNET Family on NT4 Server CD - it says that it cannot find oemsetup.inf file (I can't confirm that the CD is the same version that was used to load NT 10 years!)
Installed VMware tools (and reinstalled several times)
Load the vmware tools CD, then tried to insall driver manually, hoewver are no vmware on the "CD image" driver, just some msi files
Checked the directory program files for readers of vmware, I can find the video, mouse... drivers etc but NO NETWORK drivers
Downloaded the AMD PCNET Family V1.9 card and installed this driver, but NT says that it cannot find the adatper Protocol still does not load.
I am now my piece.
I hope someone can offer advice.
What is the vmx list
ethernet0.virtualDev = "vlance" or something else?
___________________________________
Maybe you are looking for
-
Step by step please discreption how to clean old imust search
-
Error 8024002D installation Windows Updates and 800F080D codes
original title: error 8024002D and 800F080D codes Whenever I try to download the updates to my computer, I get 800F080D error and 8024002D codes. How can I fix it?
-
Microsoft Word where on my computer (Windows 7)?
I wanted to open a file with Word, but I don't know where it is located. I know that I installed it on my computer.
-
easy transfer file permissions deny access
I used easy transfer to move the files from xp to win 7 computer. the files transferred but refuse me access, even when I change the full security permissions. What should I do to restore the full permissions on my files transferred?
-
Redirect to url by default apex
What determines where the url by default http://domain:port / apex redirects?This default page can be changed to redirect to another page? I would like to than the base http://domain:port url / apex to redirect to a page that has been created instead