Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

Similar Questions

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• Two issues I think are linked: connectivity and Windows Firewall status. Service dependency dose not exist or has been marked for deletion.

  I reinstall a Menory card to check the weather it was defective. I also reset CMOS as part of the process. (Recommended HP) I found that the card was faulty. After reboot, I had security alerts that Windows Firewall did not work. And also unable to connect to the Internet.  I restarted the Sprint after disconnection and reconnection there. (USB) I was able to get the Internet, but the red X connection
  on the screen in the taskbar never changed to "land". Hovering on it said "dependence on the dose of service not exist or has been deleted. Everything I tried for this problem, either online or offline has failed.
  Pretty much the same thing for Windows Firewall, I can't change the settings, turn on and dosen't snap so. Eror code 0x6D9. Also get code MSSvcservice 87 (0 X 609). Both are still declining. Can't get in Windows Firewall / Advanced to change settings or turn on firewall. Cannot find Microsoft Firewall Client ISA server, look like, go.
  Right now I'm pretty frustrated, been working on this a day and half and I'm pretty well lost.

  Problem fixed, would run recovery.

• Error 1705: the dependency service does not exist or has been marked for deletion

  When I tried to restart the window 2008 Server service: "remote desktop virtualization host agent" then the error of the object turned.

  and the client computer to outernet can not remote connect to the server, the error appeared as the below:

  

  Please help me.

  Thank you very much.

  Hello

  You can ask your question here for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• How to reset the OpenLDAP service that has been marked for deletion

  Hello
  I installed Shared Services, Essbase and planning in my PC. After installing it, I went to the services screen. I found that the OpenLDAP service was with the status 'Started' and 'Disabled'. When I try to change the status of the "Disabled" to "Automatic" or "Manual" function, I get an error "the specified service has been marked for deletion". If I tried to stop the service, the service disappears from the list of services. I am constantly confronted this question even if I tried to reinstall all the modules. Can someone tell me how I can solve this problem?
  
  Thanks in advance,
  Chavigny

  Hello

  I guess after it has been marked for deletion and you restart then the service is removed?

  I don't know what version you are but to 9.3.1 again, create OpenLdap service

  Open a cmd prompt to the directory

  *\Hyperion\SharedServices\9.3.1\openLDAP*

  and type: -.

  slapd.exe install OpenLDAP-slapd 'Hyperion S9 OpenLDAP'

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Crackle M4800 Audio when the sound is played (if no sound has been played for a while)

  I have a new DELL Precision M4800 running Windows 7.

  There is a distinct noise pop crackle that occurs when the sound is played (if no sound has been played for a while.)

  If the laptop is audio playback currently it looks good, but if the laptop is quiet for a while and then something like an e-mail notification is available, crack/pop noise happens as the driver/speaker is trying to wake up.

  The problem occurs with the laptop connected and detached.

  -Edit

  The solution for me was provided by pknb below.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

  I do not have the Audio from Dell driver installed - and it seems that maybe the default setting is that the speakers put in 'sleep' in the context of a power saving mode. Looking at my description above I even referenced at the time of the issue seemed to be that the speaker was not long in 'waking '. In any case after you change this setting the problem now seems to be resolved.

  Reference Dell Open Audio in the control panel. Go to advanced, energy management. Disable the option to disable audio devices.

• Since the update for Firefox 4, I am no longer offers the possibility to save the tabs when closing making it much faster to access these sites when starting the next day. Why this possibility has been removed? It's a favorite feature.

  Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.

  Firefox 4 records the previous session.
  
  You can use "Firefox > history > restore previous Session" for the previous session.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

  You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.

  • browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
  • browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  • browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  • browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Error 1075 coil dependacy service does not exist or has marked the removal of the form

  Have a Cannon printer who worked again for more than 12 months.  I have a moment, she does not handle and I receieved a notice that the error 1075, identified as a dependency service doesn't exist or has been marked for deletion.  I went on a Microsoft program that checked my complete system and came up with the answer PRINT SPOOLER NOT CONNECTED may NOT HELP.  I worked on this problem for two weeks check other sources on the Internet successfully.  Is the answer to this situation TO REMOVE MY WINDOWS XP PROGRAM AND re-install.

  There is another way from a command prompt, enter:

  sc qc spooler

  and you'll see everything:

  XR | GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  SERVICE_START_NAME: LocalSystem

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• I have error #1053 windows could not start the printer spooler. Help

  Windows could not start the printer spooler. I received the error #1053.
  whatever it is sent to the printer never finished loading and crashes to the top
  my computer, so I have to re - start.

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.